[PATCH] arm64: dts: mt7622: fix switch probe on bananapi-r64

[AngeloGioacchino Del Regno]

Il 11/06/24 14:56, Arınç ÜNAL ha scritto:
> On 11/06/2024 15:28, AngeloGioacchino Del Regno wrote:
>> Il 11/06/24 13:38, Arınç ÜNAL ha scritto:
>>> On 11/06/2024 14:30, Thorsten Leemhuis wrote:
>>>> On 07.06.24 16:15, Thorsten Leemhuis wrote:
>>>>> On 07.06.24 16:03, Paolo Abeni wrote:
>>>>>> On Thu, 2024-06-06 at 10:26 +0200, Thorsten Leemhuis wrote:
>>>>>>> On 31.05.24 08:10, Arınç ÜNAL wrote:
>>>>>>>> On 31/05/2024 08.40, Thorsten Leemhuis wrote:
>>>>>>>>> [adding Paolo, who committed the culprit]
>>>>>>>
>>>>>>> /me slowly wonders if the culprit should be reverted for now (see below)
>>>>>>> and should be reapplied later together with the matching changes from
>>>>>>> Arınç ÜNAL.
>>>>>>
>>>>>> FWIS I think a revert should be avoided, given that a fix is available
>>>>>> and nicely small.
>>>>>
>>>>> Yeah, on one hand I agree; but on the other it seems that the
>>>>> maintainers that would have to take care of the dt changes to fix this
>>>>> until now remained silent in this thread, apart from Rob who sent the
>>>>> mail regarding the warnings.
>>>>>
>>>>> I put those maintainers in the To: field of this mail, maybe that might
>>>>> lead to some reaction.
>>>>
>>>> Still no reply from the DRS folks or any other progress I noticed. Guess
>>>> that means I will soon have no other choice than to get Linus involved,
>>>> as this looks stuck. :-( #sigh
>>>
>>> Does it have to be Linus that needs to apply "[PATCH 0/2] Set PHY address
>>> of MT7531 switch to 0x1f on MediaTek arm64 boards"? Aren't there any other
>>> ARM maintainers that can apply the fix to their tree?
>>>
>>> Arınç
>>
>> You have feedback from two people on the series that you mentioned, and noone
>> is going to apply something that needs to be fixed.
>>
>> I'm giving you the possibility of addressing the comments in your patch, but
>> I don't want to see any mention of the driver previously ignoring this or that
>> as this is irrelevant for a hardware description. Devicetree only describes HW.
>>
>> Adding up, in commit 868ff5f4944a ("net: dsa: mt7530-mdio: read PHY address of 
>> switch from device tree"),
>> you have created a regression.
>>
>> Regressions should be fixed - as in - if the driver did work before with the old
>> devicetrees, it shall still work. You can't break ABI. Any changes that you do
>> to your driver must not break functionality with old devicetrees.
>>
>> So...
>>
>> ------> Fix the driver that you broke <------
> 
> The device tree ABI before the change on the driver:
> 
> The reg value represents the PHY address of the switch.
> 
> The device tree ABI after the change on the driver:
> 
> The reg value represents the PHY address of the switch.
> 
> I see no device tree ABI breakage. What I see instead is the driver
> starting enforcing the device tree ABI. No change had been made on the
> device tree ABI so any non-Linux driver that controls this switch continues
> to work.
> 
> These old device tree source files in question did not abide by the device
> tree ABI in the first place, which is why they don't work anymore as the
> Linux driver now enforces the ABI. Device tree source files not conforming
> to the ABI is not something to maintain but to fix. The patch series that
> fixes them are already submitted.

As I said, the devicetree MUST describe the hardware correctly, and on that I do
agree, and I, again, said that I want to take the devicetree fix.

However, the driver regressed, and this broke functionality with old device trees.
Old device trees might have been wrong (and they are, yes), but functionality was
there and the switch was working.

I repeat, driver changes MUST be retro-compatible with older device trees, and your
driver changes ARE NOT; otherwise, this wouldn't be called *regression*.

Again, please fix the driver to be retro-compatible with old device trees.

Regards,
Angelo