[PATCH v4 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface

Julien Stephan jstephan at baylibre.com
Fri Jun 7 01:52:33 PDT 2024


Le ven. 12 janv. 2024 à 08:32, Krzysztof Kozlowski
<krzysztof.kozlowski at linaro.org> a écrit :
>
> On 10/01/2024 15:14, Julien Stephan wrote:
> > From: Louis Kuo <louis.kuo at mediatek.com>
> >
> > This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
> > some Mediatek SoC, such as the mt8365
> >
>
> ...
>
> > +  clock-names:
> > +    items:
> > +      - const: camsys
> > +      - const: top_mux
> > +
> > +  phys:
> > +    minItems: 1
> > +    maxItems: 4
> > +    description:
> > +      phandle to the PHYs connected to CSI0/A, CSI1, CSI2 and CSI0B
> > +
> > +  phy-names:
> > +    minItems: 1
> > +    items:
> > +      - const: csi0
> > +      - const: csi1
> > +      - const: csi2
> > +      - const: csi0b
>
> Why one hardware has flexible number of phys?

Hi Krzysztof,

seninf can have multiple port depending on the soc, each requiring its own phy

>
> > +
> > +  ports:
> > +    $ref: /schemas/graph.yaml#/properties/ports
> > +
> > +    properties:
> > +      port at 0:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: CSI0 or CSI0A port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              clock-lanes:
> > +                maxItems: 1
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +      port at 1:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: CSI1 port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              clock-lanes:
> > +                maxItems: 1
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +      port at 2:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: CSI2 port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              clock-lanes:
> > +                maxItems: 1
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 4
> > +
> > +      port at 3:
> > +        $ref: /schemas/graph.yaml#/$defs/port-base
> > +        unevaluatedProperties: false
> > +        description: CSI0B port
> > +
> > +        properties:
> > +          endpoint:
> > +            $ref: video-interfaces.yaml#
> > +            unevaluatedProperties: false
> > +
> > +            properties:
> > +              clock-lanes:
> > +                maxItems: 1
> > +              data-lanes:
> > +                minItems: 1
> > +                maxItems: 2
> > +
> > +      port at 4:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for cam0
> > +
> > +      port at 5:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for cam1
> > +
> > +      port at 6:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for camsv0
> > +
> > +      port at 7:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for camsv1
> > +
> > +      port at 8:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for camsv2
> > +
> > +      port at 9:
> > +        $ref: /schemas/graph.yaml#/properties/port
> > +        description: connection point for camsv3
> > +
> > +    required:
> > +      - port at 0
> > +      - port at 1
> > +      - port at 2
> > +      - port at 3
> > +      - port at 4
> > +      - port at 5
> > +      - port at 6
> > +      - port at 7
> > +      - port at 8
> > +      - port at 9
> > +
> > +required:
> > +  - compatible
> > +  - interrupts
> > +  - clocks
> > +  - clock-names
> > +  - power-domains
> > +  - ports
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/phy/phy.h>
> > +    #include <dt-bindings/power/mediatek,mt8365-power.h>
> > +
> > +    soc {
> > +          #address-cells = <2>;
> > +          #size-cells = <2>;
>
> Use 4 spaces for example indentation.
>
> > +
> > +          seninf: seninf at 15040000 {
>
> Node names should be generic. See also an explanation and list of
> examples (not exhaustive) in DT specification:
> https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
>
>
> > +                compatible = "mediatek,mt8365-seninf";
> > +                reg = <0 0x15040000 0 0x6000>;
> > +                interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
> > +                clocks = <&camsys CLK_CAM_SENIF>,
> > +                         <&topckgen CLK_TOP_SENIF_SEL>;
> > +                clock-names = "camsys", "top_mux";
> > +
> > +                power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> > +
> > +                phys = <&mipi_csi0 PHY_TYPE_DPHY>;
> > +                phy-names = "csi0";
> > +
> > +                ports {
> > +                      #address-cells = <1>;
> > +                      #size-cells = <0>;
> > +
> > +                      port at 0 {
> > +                            reg = <0>;
> > +                            seninf_in1: endpoint {
> > +                              clock-lanes = <2>;
> > +                              data-lanes = <1 3 0 4>;
> > +                              remote-endpoint = <&isp1_out>;
> > +                            };
> > +                      };
> > +
> > +                      port at 1 {
> > +                          reg = <1>;
> > +                      };
> > +
> > +                      port at 2 {
> > +                            reg = <2>;
> > +                      };
> > +
> > +                      port at 3 {
> > +                            reg = <3>;
> > +                      };
> > +
> > +                      port at 4 {
> > +                            reg = <4>;
> > +                            seninf_camsv1_endpoint: endpoint {
> > +                                remote-endpoint = <&camsv1_endpoint>;
> > +                            };
> > +                      };
> > +
> > +                      port at 5 {
> > +                            reg = <5>;
> > +                      };
> > +
> > +                      port at 6 {
> > +                            reg = <6>;
> > +                      };
> > +
> > +                      port at 7 {
> > +                            reg = <7>;
> > +                      };
> > +
> > +                      port at 8 {
> > +                            reg = <8>;
> > +                      };
> > +
> > +                      port at 9 {
> > +                            reg = <9>;
> > +                      };
> > +
>
> Stray blank line
>
> > +                };
>
>
>
> Best regards,
> Krzysztof
>



More information about the Linux-mediatek mailing list