[PATCH 5/6] arm64: dts: mediatek: mt8173: Fix MFG_ASYNC power domain clock

[Chen-Yu Tsai]

On Wed, Jun 5, 2024 at 7:25 PM AngeloGioacchino Del Regno
<angelogioacchino.delregno at collabora.com> wrote:
>
> Il 05/06/24 10:25, Chen-Yu Tsai ha scritto:
> > On Thu, May 30, 2024 at 6:03 PM AngeloGioacchino Del Regno
> > <angelogioacchino.delregno at collabora.com> wrote:
> >>
> >> Il 30/05/24 10:35, Chen-Yu Tsai ha scritto:
> >>> The MFG_ASYNC domain, which is likely associated to the whole MFG block,
> >>> currently specifies clk26m as its domain clock. This is bogus, since the
> >>> clock is an external crystal with no controls. Also, the MFG block has
> >>> a independent CLK_TOP_AXI_MFG_IN_SEL clock, which according to the block
> >>> diagram, gates access to the hardware registers. Having this one as the
> >>> domain clock makes much more sense. This also fixes access to the MFGTOP
> >>> registers.
> >>>
> >>> Change the MFG_ASYNC domain clock to CLK_TOP_AXI_MFG_IN_SEL.
> >>>
> >>> Fixes: 8b6562644df9 ("arm64: dts: mediatek: Add mt8173 power domain controller")
> >>> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> >>
> >> Just one question... what happens if there's no GPU support at all and this
> >> power domain gets powered off?
> >>
> >> I expect the answer to be "nothing", so I'm preventively giving you my
> >
> > Well it's powered off by default. Just double checked, and without the final
> > patch:
> >
> > # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
> > domain                          status          children
> >              performance
> >      /device                                             runtime status
> > ----------------------------------------------------------------------------------------------
> > mfg                             off-0
> >              0
> > mfg_2d                          off-0
> >              0
> >                                                  mfg
> > mfg_async                       off-0
> >              0
> >                                                  mfg_2d
> >
> > And with the last patch but with the powervr removed:
> >
> > # cat /sys/kernel/debug/pm_genpd/pm_genpd_summary
> > domain                          status          children
> >              performance
> >      /device                                             runtime status
> > ----------------------------------------------------------------------------------------------
> > mfg_apm                         off-0
> >              0
> > mfg                             off-0
> >              0
> >                                                  mfg_apm
> >      /devices/platform/soc/13fff000.clock-controller     suspended
> >              0
> > mfg_2d                          off-0
> >              0
> >                                                  mfg
> > mfg_async                       off-0
> >              0
> >                                                  mfg_2d
> >
> > Things seem to work OK. I can SSH in, and the framebuffer console on the screen
> > works fine.
> >
> >
> > Note that accessing the regmap through debugfs doesn't do much good. regmap
> > doesn't handle runtime PM. And the syscon regmap isn't even tied to a
> > struct device. Dumping the regmap through debugfs while the power domain
> > is off gives all zeroes, likely due to bus isolation.
> >
>
> The last part where you say "gives all zeroes" is actually the best outcome that
> I could have ever expected.
>
> So, well, many thanks for this very nice analysis and test.
>
> >> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
>
> I confirm my green light. It's beautiful when this kind of patches come upstream
> especially with your replies actually removing any kind of possible doubt.
>
> >
> > Thanks!
>
> Thank *you* for caring about this old platform!

Can you pick up this patch first?

Frank mentioned that the GPU core takes two power domains. I asked
MediaTek for more information but I don't know how long that will take.


ChenYu

> Cheers,
> Angelo
>
> >
> > ChenYu
> >
> >> ....but if I'm wrong and the answer isn't exactly "nothing", then I still agree
> >> with this commit, but only after removing the Fixes tag.
> >>
> >> Cheers,
> >> Angelo
> >>
> >>> ---
> >>>    arch/arm64/boot/dts/mediatek/mt8173.dtsi | 2 +-
> >>>    1 file changed, 1 insertion(+), 1 deletion(-)
> >>>
> >>> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >>> index 3458be7f7f61..136b28f80cc2 100644
> >>> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >>> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> >>> @@ -497,7 +497,7 @@ power-domain at MT8173_POWER_DOMAIN_USB {
> >>>                                };
> >>>                                mfg_async: power-domain at MT8173_POWER_DOMAIN_MFG_ASYNC {
> >>>                                        reg = <MT8173_POWER_DOMAIN_MFG_ASYNC>;
> >>> -                                     clocks = <&clk26m>;
> >>> +                                     clocks = <&topckgen CLK_TOP_AXI_MFG_IN_SEL>;
> >>>                                        clock-names = "mfg";
> >>>                                        #address-cells = <1>;
> >>>                                        #size-cells = <0>;
> >>
> >>
>