[PATCH v6 1/5] dt-bindings: media: add mediatek ISP3.0 sensor interface

[AngeloGioacchino Del Regno]

Il 29/07/24 16:57, AngeloGioacchino Del Regno ha scritto:
> Il 29/07/24 16:48, Julien Stephan ha scritto:
>> From: Louis Kuo <louis.kuo at mediatek.com>
>>
>> This adds the bindings, for the mediatek ISP3.0 SENINF module embedded in
>> some Mediatek SoC, such as the mt8365
>>
>> Signed-off-by: Louis Kuo <louis.kuo at mediatek.com>
>> Signed-off-by: Phi-Bang Nguyen <pnguyen at baylibre.com>
>> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
>> ---
>>   .../bindings/media/mediatek,mt8365-seninf.yaml     | 259 +++++++++++++++++++++
>>   MAINTAINERS                                        |   7 +
>>   2 files changed, 266 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml 
>> b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>> new file mode 100644
>> index 000000000000..8bd78ef424ac
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>> @@ -0,0 +1,259 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +# Copyright (c) 2023 MediaTek, BayLibre
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/media/mediatek,mt8365-seninf.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: MediaTek Sensor Interface 3.0
>> +
> 
> ..snip..
> 
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    #include <dt-bindings/clock/mediatek,mt8365-clk.h>
>> +    #include <dt-bindings/interrupt-controller/irq.h>
>> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +    #include <dt-bindings/phy/phy.h>
>> +    #include <dt-bindings/power/mediatek,mt8365-power.h>
>> +
>> +    soc {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        csi at 15040000 {
>> +            compatible = "mediatek,mt8365-seninf";
>> +            reg = <0 0x15040000 0 0x6000>;
>> +            interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_LOW>;
>> +            clocks = <&camsys CLK_CAM_SENIF>,
>> +                     <&topckgen CLK_TOP_SENIF_SEL>;
>> +            clock-names = "camsys", "top_mux";
>> +
>> +            power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
>> +
>> +            phys = <&mipi_csi0 PHY_TYPE_DPHY>, <&mipi_csi1>;
>> +            phy-names = "csi0", "csi1";
>> +
>> +            ports {
>> +                #address-cells = <1>;
>> +                #size-cells = <0>;
>> +
>> +                port at 0 {
>> +                    reg = <0>;
>> +                    seninf_in1: endpoint {
>> +                        clock-lanes = <2>;
>> +                        data-lanes = <1 3 0 4>;
>> +                        remote-endpoint = <&isp1_out>;
>> +                    };
>> +                };
>> +
>> +                port at 1 {
>> +                    reg = <1>;
>> +                };
>> +
>> +                port at 2 {
>> +                    reg = <2>;
>> +                };
>> +
>> +                port at 3 {
>> +                    reg = <3>;
>> +                };
> 
> I don't really get why you got all those empty ports here, as you could simply
> avoid adding all of the empty nodes instead.
> 
> I don't have strong opinions about that anyway so, regardless of that....
> 
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> 

Wait a minute. No. The ports are all required?! Why?!

Regards,
Angelo

>> +
>> +                port at 4 {
>> +                    reg = <4>;
>> +                    seninf_camsv1_endpoint: endpoint {
>> +                        remote-endpoint = <&camsv1_endpoint>;
>> +                    };
>> +                };
>> +
>> +                port at 5 {
>> +                    reg = <5>;
>> +                    seninf_camsv2_endpoint: endpoint {
>> +                        remote-endpoint = <&camsv2_endpoint>;
>> +                    };
>> +                };
>> +
>> +                port at 6 {
>> +                    reg = <6>;
>> +                };
>> +
>> +                port at 7 {
>> +                    reg = <7>;
>> +                };
>> +
>> +                port at 8 {
>> +                    reg = <8>;
>> +                };
>> +
>> +                port at 9 {
>> +                    reg = <9>;
>> +                };
>> +            };
>> +        };
>> +    };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index d6c90161c7bf..6bd7df1c3e08 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -14158,6 +14158,13 @@ M:    Sean Wang <sean.wang at mediatek.com>
>>   S:    Maintained
>>   F:    drivers/char/hw_random/mtk-rng.c
>> +MEDIATEK ISP3.0 DRIVER
>> +M:    Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>> +M:    Julien Stephan <jstephan at baylibre.com>
>> +M:    Andy Hsieh <andy.hsieh at mediatek.com>
>> +S:    Supported
>> +F:    Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
>> +
>>   MEDIATEK SMI DRIVER
>>   M:    Yong Wu <yong.wu at mediatek.com>
>>   L:    linux-mediatek at lists.infradead.org (moderated for non-subscribers)
>>
>