[PATCH v2] nvmem: mtk-efuse: Only register socinfo device if needed cells are there

[Nícolas F. R. A. Prado]

On Wed, Jul 10, 2024 at 11:31:11AM +0200, AngeloGioacchino Del Regno wrote:
> Il 08/07/24 21:43, Nícolas F. R. A. Prado ha scritto:
> > Not every efuse region has cells storing SoC information. Only register
> > an socinfo device if the required cells are present.
> > 
> > This prevents the pointless process of creating an socinfo device,
> > probing it with the socinfo driver only to ultimately error out like so
> > 
> >    mtk-socinfo mtk-socinfo.0.auto: error -ENOENT: Failed to get socinfo data
> >    mtk-socinfo mtk-socinfo.0.auto: probe with driver mtk-socinfo failed with error -2
> > 
> > This issue is observed on the mt8183-kukui-jacuzzi-juniper-sku16
> > platform, which has two efuse regions, but only one of them contains the
> > SoC data.
> > 
> 
> I think that we should rather remove or disable the first eFuse region, as
> even though that is enabled:
> 
>  - This is the only SoC having two regions
>    - I'm not even sure that the region at 0x8000000 is really efuse
>    - Not even referenced in datasheets....
>  - It's unused, as in, it's not exposing any information and no declared cells
> 
> Don't misunderstand me, this is not an invalid change, but I rather prefer
> to resolve this by disabling that (effectively unused!) node, avoiding to
> add more lines to this driver that would be useless after fixing that small
> single thing.

I'm not confident that we can say that that efuse is not exposing any
information. Indeed there are no cells so it's not used by any other driver, but
the efuse contents are still exposed to userspace if CONFIG_NVMEM_SYSFS is
enabled.

I dumped it on one of the mt8183-kukui-jacuzzi-juniper-sku16 units:

  $ ls -l /sys/bus/nvmem/devices/
  total 0
  lrwxrwxrwx    1 root     root             0 Jul 18 21:43 mmtd0 -> ../../../devices/platform/soc/11010000.spi/spi_master/spi1/spi1.0/mtd/mtd0/mtd0
  lrwxrwxrwx    1 root     root             0 Jul 18 21:43 nvmem0 -> ../../../devices/platform/soc/8000000.efuse/nvmem0
  lrwxrwxrwx    1 root     root             0 Jul 18 21:43 nvmem1 -> ../../../devices/platform/soc/11f10000.efuse/nvmem1
  
  $ hexdump -C /sys/bus/nvmem/devices/nvmem0/nvmem
  00000000  88 07 00 00 00 8a 00 00  00 ca 00 00 00 00 00 00  |................|
  00000010

I power cycled the unit and ran this again and it still showed the same
contents. I also ran the same on a different unit of the same model and it
showed the same contents. Of course this doesn't prove anything, but given that
the contents seem to be constant across reboots and even different units, it
does look like it could be an efuse to me. :)

As to whether the contents are useful at all, or if there are
userspace applications making use of it I have no clue. But if in doubt,
shouldn't we keep it around?

Thanks,
Nícolas