[PATCH v5 2/5] dt-bindings: media: add mediatek ISP3.0 camsv

Laurent Pinchart laurent.pinchart at ideasonboard.com
Thu Jul 4 15:51:56 PDT 2024


On Thu, Jul 04, 2024 at 05:29:59PM +0100, Conor Dooley wrote:
> On Thu, Jul 04, 2024 at 03:36:41PM +0200, Julien Stephan wrote:
> > From: Phi-bang Nguyen <pnguyen at baylibre.com>
> > 
> > This adds the bindings, for the ISP3.0 camsv module embedded in
> > some Mediatek SoC, such as the mt8365
> > 
> > Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> > Link: https://lore.kernel.org/r/20230807094940.329165-4-jstephan@baylibre.com
> 
> Another confusing link tag, why is it here?
> 
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > +    #include <dt-bindings/memory/mediatek,mt8365-larb-port.h>
> > +    #include <dt-bindings/power/mediatek,mt8365-power.h>
> > +
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        camsv1: camsv at 15050000 {
> 
> Didn't Krzysztof already comment about the node name here?
> Additionally, the "camsv1" label doest appear to be used, so should be
> dropped.

You're right about the label, it should be dropped. Regarding the name,
as far as I understand, Krzysztof was fine with specific names when no
generic alternative can be easily found, which I think is the case here.
If my understanding is incorrect, could someone help finding a better
name ?

> > +            compatible = "mediatek,mt8365-camsv";
> > +            reg = <0 0x15050000 0 0x0040>,
> > +                  <0 0x15050208 0 0x0020>,
> > +                  <0 0x15050400 0 0x0100>;
> > +            interrupts = <GIC_SPI 186 IRQ_TYPE_LEVEL_LOW>;
> > +            clocks = <&camsys CLK_CAM>,
> > +                     <&camsys CLK_CAMTG>,
> > +                     <&camsys CLK_CAMSV0>;
> > +            clock-names = "cam", "camtg", "camsv";
> > +            iommus = <&iommu M4U_PORT_CAM_IMGO>;
> > +            power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
> > +
> > +            ports {
> > +                #address-cells = <1>;
> > +                #size-cells = <0>;
> > +                port at 0 {
> > +                    reg = <0>;
> > +                    camsv1_endpoint: endpoint {
> > +                        remote-endpoint = <&seninf_camsv1_endpoint>;
> > +                    };
> > +                };
> > +            };
> > +        };
> > +    };
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 6bd7df1c3e08..9ac8c08ba692 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -14163,6 +14163,7 @@ M:	Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> >  M:	Julien Stephan <jstephan at baylibre.com>
> >  M:	Andy Hsieh <andy.hsieh at mediatek.com>
> >  S:	Supported
> > +F:	Documentation/devicetree/bindings/media/mediatek,mt8365-camsv.yaml
> >  F:	Documentation/devicetree/bindings/media/mediatek,mt8365-seninf.yaml
> >  
> >  MEDIATEK SMI DRIVER


-- 
Regards,

Laurent Pinchart



More information about the Linux-mediatek mailing list