[PATCH 2/2] usb: mtu3: Add MT8195 MTU3 ip-sleep wakeup support

[Matthias Brugger]

On 12/01/2024 14:32, AngeloGioacchino Del Regno wrote:
> Add support for the ip-sleep wakeup functionality on the three MTU3
> controllers found on the MT8195 SoC.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> ---
>   drivers/usb/mtu3/mtu3_host.c | 31 +++++++++++++++++++++++++++++++
>   1 file changed, 31 insertions(+)
> 
> diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
> index 9f2be22af844..85f49e00e8db 100644
> --- a/drivers/usb/mtu3/mtu3_host.c
> +++ b/drivers/usb/mtu3/mtu3_host.c
> @@ -34,6 +34,19 @@
>   #define WC0_SSUSB0_CDEN		BIT(6)
>   #define WC0_IS_SPM_EN		BIT(1)
>   
> +/* mt8195 */
> +#define PERI_WK_CTRL0_8195	0x04
> +#define WC0_IS_P_95		BIT(30)	/* polarity */
> +#define WC0_IS_C_95(x)		((u32)(((x) & 0x7) << 27))
> +#define WC0_IS_EN_P3_95		BIT(26)
> +#define WC0_IS_EN_P2_95		BIT(25)
> +#define WC0_IS_EN_P1_95		BIT(24)

Not used, shouldn't we drop that?

Regards,
Matthias

> +
> +#define PERI_WK_CTRL1_8195	0x20
> +#define WC1_IS_C_95(x)		((u32)(((x) & 0xf) << 28))
> +#define WC1_IS_P_95		BIT(12)
> +#define WC1_IS_EN_P0_95		BIT(6)
> +
>   /* mt2712 etc */
>   #define PERI_SSUSB_SPM_CTRL	0x0
>   #define SSC_IP_SLEEP_EN	BIT(4)
> @@ -44,6 +57,9 @@ enum ssusb_uwk_vers {
>   	SSUSB_UWK_V2,
>   	SSUSB_UWK_V1_1 = 101,	/* specific revision 1.01 */
>   	SSUSB_UWK_V1_2,		/* specific revision 1.02 */
> +	SSUSB_UWK_V1_3,		/* mt8195 IP0 */
> +	SSUSB_UWK_V1_5 = 105,	/* mt8195 IP2 */
> +	SSUSB_UWK_V1_6,		/* mt8195 IP3 */
>   };
>   
>   /*
> @@ -70,6 +86,21 @@ static void ssusb_wakeup_ip_sleep_set(struct ssusb_mtk *ssusb, bool enable)
>   		msk = WC0_SSUSB0_CDEN | WC0_IS_SPM_EN;
>   		val = enable ? msk : 0;
>   		break;
> +	case SSUSB_UWK_V1_3:
> +		reg = ssusb->uwk_reg_base + PERI_WK_CTRL1_8195;
> +		msk = WC1_IS_EN_P0_95 | WC1_IS_C_95(0xf) | WC1_IS_P_95;
> +		val = enable ? (WC1_IS_EN_P0_95 | WC1_IS_C_95(0x1)) : 0;
> +		break;
> +	case SSUSB_UWK_V1_5:
> +		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
> +		msk = WC0_IS_EN_P2_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
> +		val = enable ? (WC0_IS_EN_P2_95 | WC0_IS_C_95(0x1)) : 0;
> +		break;
> +	case SSUSB_UWK_V1_6:
> +		reg = ssusb->uwk_reg_base + PERI_WK_CTRL0_8195;
> +		msk = WC0_IS_EN_P3_95 | WC0_IS_C_95(0x7) | WC0_IS_P_95;
> +		val = enable ? (WC0_IS_EN_P3_95 | WC0_IS_C_95(0x1)) : 0;
> +		break;
>   	case SSUSB_UWK_V2:
>   		reg = ssusb->uwk_reg_base + PERI_SSUSB_SPM_CTRL;
>   		msk = SSC_IP_SLEEP_EN | SSC_SPM_INT_EN;