[PATCH 12/15] arm64: dts: mediatek: radxa-nio-12l: Enable PCI-Express 1 for WiFi

[AngeloGioacchino Del Regno]

This board has a MT7921E combo chip connected through USB for Bluetooth
and PCI-Express for WiFi.
Add the PCIe1 controller to enable WiFi connectivity.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
---
 .../boot/dts/mediatek/mt8395-radxa-nio-12l.dts    | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index eafce9cb2598..be2094b8fe3c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -573,6 +573,15 @@ pins-bus {
 		};
 	};
 
+	pcie1_default_pins: pcie1-default-pins {
+		pins-bus {
+			pinmux = <PINMUX_GPIO0__FUNC_PERSTN_1>,
+				 <PINMUX_GPIO1__FUNC_CLKREQN_1>,
+				 <PINMUX_GPIO2__FUNC_WAKEN_1>;
+			bias-disable;
+		};
+	};
+
 	uart0_pins: uart0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO98__FUNC_UTXD0>,
@@ -598,6 +607,12 @@ &pcie0 {
 	status = "okay";
 };
 
+&pcie1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_default_pins>;
+	status = "okay";
+};
+
 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
 };
-- 
2.43.0