[PATCH v4 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv

[CK Hu (胡俊光)]

Hi, Julien:

On Wed, 2024-01-10 at 15:14 +0100, Julien Stephan wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  From: Phi-bang Nguyen <pnguyen at baylibre.com>
> 
> This driver provides a path to bypass the SoC ISP so that image data
> coming from the SENINF can go directly into memory without any image
> processing. This allows the use of an external ISP.
> 
> Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> Signed-off-by: Florian Sylvestre <fsylvestre at baylibre.com>
> [Paul Elder fix irq locking]
> Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> Co-developed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Co-developed-by: Julien Stephan <jstephan at baylibre.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---

[snip]

> +
> +static int mtk_cam_vb2_start_streaming(struct vb2_queue *vq,
> +				       unsigned int count)
> +{
> +	struct mtk_cam_dev *cam = vb2_get_drv_priv(vq);
> +	struct mtk_cam_dev_buffer *buf;
> +	struct mtk_cam_video_device *vdev =
> +		vb2_queue_to_mtk_cam_video_device(vq);
> +	struct device *dev = cam->dev;
> +	const struct v4l2_pix_format_mplane *fmt = &vdev->format;
> +	int ret;
> +	unsigned long flags = 0;
> +
> +	if (pm_runtime_get_sync(dev) < 0) {
> +		dev_err(dev, "failed to get pm_runtime\n");
> +		pm_runtime_put_autosuspend(dev);
> +		return -1;
> +	}
> +
> +	(*cam->hw_functions->mtk_cam_setup)(cam, fmt->width, fmt-
> >height,
> +			fmt->plane_fmt[0].bytesperline, vdev->fmtinfo-
> >code);
> +
> +
> +	/* Enable CMOS and VF */
> +	mtk_cam_cmos_vf_enable(cam, true, vdev->fmtinfo->packed);
> +
> +	mutex_lock(&cam->op_lock);
> +
> +	ret = mtk_cam_verify_format(cam);
> +	if (ret < 0)
> +		goto fail_unlock;
> +
> +	/* Start streaming of the whole pipeline now*/
> +	if (!cam->pipeline.start_count) {
> +		ret = media_pipeline_start(vdev->vdev.entity.pads,
> +					   &cam->pipeline);
> +		if (ret) {
> +			dev_err(dev, "failed to start pipeline:%d\n",
> ret);
> +			goto fail_unlock;
> +		}
> +	}
> +
> +	/* Media links are fixed after media_pipeline_start */
> +	cam->stream_count++;
> +
> +	cam->sequence = (unsigned int)-1;
> +
> +	/* Stream on the sub-device */
> +	ret = v4l2_subdev_call(&cam->subdev, video, s_stream, 1);
> +	if (ret)
> +		goto fail_no_stream;
> +
> +	mutex_unlock(&cam->op_lock);
> +
> +	/* Create dummy buffer */
> +	cam->dummy_size = fmt->plane_fmt[0].sizeimage;
> +
> +	cam->dummy.vaddr = dma_alloc_coherent(cam->dev, cam-
> >dummy_size,
> +					      &cam->dummy.daddr,
> GFP_KERNEL);

Dummy buffer cost much in DRAM footprint. I think we can get rid of
this dummy buffer. If no buffer is queued from user space, call
mtk_camsv30_cmos_vf_hw_disable() to stop write data into DRAM. After
buffer is queued from user space, call mtk_camsv30_cmos_vf_hw_enable()
to start write data into DRAM.

Regards,
CK

> +	if (!cam->dummy.vaddr) {
> +		ret = -ENOMEM;
> +		goto fail_no_buffer;
> +	}
> +
> +	/* update first buffer address */
> +
> +	/* added the buffer into the tracking list */
> +	spin_lock_irqsave(&cam->irqlock, flags);
> +	if (list_empty(&cam->buf_list)) {
> +		(*cam->hw_functions->mtk_cam_update_buffers_add)(cam,
> &cam->dummy);
> +		cam->is_dummy_used = true;
> +	} else {
> +		buf = list_first_entry_or_null(&cam->buf_list,
> +					       struct
> mtk_cam_dev_buffer,
> +					       list);
> +		(*cam->hw_functions->mtk_cam_update_buffers_add)(cam,
> buf);
> +		cam->is_dummy_used = false;
> +	}
> +	spin_unlock_irqrestore(&cam->irqlock, flags);
> +
> +	return 0;
> +
> +fail_no_buffer:
> +	mutex_lock(&cam->op_lock);
> +	v4l2_subdev_call(&cam->subdev, video, s_stream, 0);
> +fail_no_stream:
> +	cam->stream_count--;
> +	if (cam->stream_count == 0)
> +		media_pipeline_stop(vdev->vdev.entity.pads);
> +fail_unlock:
> +	mutex_unlock(&cam->op_lock);
> +	mtk_cam_vb2_return_all_buffers(cam, VB2_BUF_STATE_QUEUED);
> +
> +	return ret;
> +}
> +