[PATCH v2 2/2] Bluetooth: btusb: mediatek: add a recovery method for MT7922 and MT7925

[Hao Qin]

From: "hao.qin" <hao.qin at mediatek.com>

For MT7922 and MT7925, add USB reset retry to recover from patch
download failure, and perform a reset before patch download to
avoid unexpected problems caused by unkonwn status of dongle.

Signed-off-by: hao.qin <hao.qin at mediatek.com>
---
 drivers/bluetooth/btusb.c | 29 ++++++++++++++++++++++++-----
 1 file changed, 24 insertions(+), 5 deletions(-)

diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index abefcd1a089d..26ad4864d06c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -3000,17 +3000,26 @@ static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 	u32 val;
 	int err;
 
-	if (dev_id == 0x7925) {
+	if (dev_id == 0x7922) {
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+		val |= 0x00002020;
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
+		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
+		btusb_mtk_uhw_reg_read(data, MTK_BT_SUBSYS_RST, &val);
+		val |= BIT(0);
+		btusb_mtk_uhw_reg_write(data, MTK_BT_SUBSYS_RST, val);
+		msleep(100);
+	} else if (dev_id == 0x7925) {
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
-		val |= (1 << 5);
+		val |= BIT(5);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
 		val &= 0xFFFF00FF;
-		val |= (1 << 13);
+		val |= BIT(13);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
 		btusb_mtk_uhw_reg_write(data, MTK_EP_RST_OPT, 0x00010001);
 		btusb_mtk_uhw_reg_read(data, MTK_BT_RESET_REG_CONNV3, &val);
-		val |= (1 << 0);
+		val |= BIT(0);
 		btusb_mtk_uhw_reg_write(data, MTK_BT_RESET_REG_CONNV3, val);
 		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
 		btusb_mtk_uhw_reg_read(data, MTK_UDMA_INT_STA_BT, &val);
@@ -3040,6 +3049,9 @@ static int btusb_mtk_subsys_reset(struct hci_dev *hdev, u32 dev_id)
 	if (err < 0)
 		bt_dev_err(hdev, "Reset timeout");
 
+	if (dev_id == 0x7922)
+		btusb_mtk_uhw_reg_write(data, MTK_UDMA_INT_STA_BT, 0x000000FF);
+
 	btusb_mtk_id_get(data, 0x70010200, &val);
 	if (!val)
 		bt_dev_err(hdev, "Can't get device id, subsys reset fail.");
@@ -3128,8 +3140,10 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 		fwname = FIRMWARE_MT7668;
 		break;
 	case 0x7922:
-	case 0x7961:
 	case 0x7925:
+		btusb_mtk_subsys_reset(hdev, dev_id);
+		fallthrough;
+	case 0x7961:
 		if (dev_id == 0x7925)
 			snprintf(fw_bin_name, sizeof(fw_bin_name),
 				 "mediatek/mt%04x/BT_RAM_CODE_MT%04x_1_%x_hdr.bin",
@@ -3143,6 +3157,11 @@ static int btusb_mtk_setup(struct hci_dev *hdev)
 						btusb_mtk_hci_wmt_sync);
 		if (err < 0) {
 			bt_dev_err(hdev, "Failed to set up firmware (%d)", err);
+			if (dev_id == 0x7922 || dev_id == 0x7925) {
+				btusb_stop_traffic(data);
+				usb_kill_anchored_urbs(&data->tx_anchor);
+				usb_queue_reset_device(data->intf);
+			}
 			return err;
 		}
 
-- 
2.18.0