[PATCH 12/18] ASoC: codecs: mt6357: add MT6357 codec

Mark Brown broonie at kernel.org
Mon Feb 26 08:09:25 PST 2024


On Mon, Feb 26, 2024 at 03:01:50PM +0100, amergnat at baylibre.com wrote:

> index 000000000000..13e95c227114
> --- /dev/null
> +++ b/sound/soc/codecs/mt6357.c
> @@ -0,0 +1,1805 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MT6357 ALSA SoC audio codec driver
> + *

Please use a C++ comment for the whole comment to make it clearer that
this is intentional.

> +static void set_playback_gpio(struct mt6357_priv *priv, bool enable)
> +{
> +	if (enable) {
> +		/* set gpio mosi mode */
> +		regmap_write(priv->regmap, MT6357_GPIO_MODE2_CLR, GPIO_MODE2_CLEAR_ALL);
> +		regmap_write(priv->regmap, MT6357_GPIO_MODE2_SET, GPIO8_MODE_SET_AUD_CLK_MOSI |
> +								  GPIO9_MODE_SET_AUD_DAT_MOSI0 |
> +								  GPIO10_MODE_SET_AUD_DAT_MOSI1 |
> +								  GPIO11_MODE_SET_AUD_SYNC_MOSI);

This would be a lot more legible if you worked out the values to set and
then had a single set of writes, currently the indentation makes it very
hard to read.  Similarly for other similar functions.

> +static int mt6357_put_volsw(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *ucontrol)
> +{
> +	struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
> +	struct mt6357_priv *priv = snd_soc_component_get_drvdata(component);
> +	struct soc_mixer_control *mc = (struct soc_mixer_control *)kcontrol->private_value;
> +	unsigned int reg;
> +	int ret;
> +
> +	ret = snd_soc_put_volsw(kcontrol, ucontrol);
> +	if (ret < 0)
> +		return ret;
> +
> +	switch (mc->reg) {
> +	case MT6357_ZCD_CON2:
> +		regmap_read(priv->regmap, MT6357_ZCD_CON2, &reg);
> +		priv->ana_gain[ANALOG_VOLUME_HPOUTL] =
> +			(reg & AUD_HPL_GAIN_MASK) >> AUD_HPL_GAIN_SFT;
> +		priv->ana_gain[ANALOG_VOLUME_HPOUTR] =
> +			(reg & AUD_HPR_GAIN_MASK) >> AUD_HPR_GAIN_SFT;
> +		break;

It would probably be less code and would definitely be clearer and
simpler to just read the values when we need them rather than constatly
keeping a cache separate to the register cache.

> +	/* ul channel swap */
> +	SOC_SINGLE("UL LR Swap", MT6357_AFE_UL_DL_CON0, AFE_UL_LR_SWAP_SFT, 1, 0),

On/off controls should end in Switch.

> +static const char * const hslo_mux_map[] = {
> +	"Open", "DACR", "Playback", "Test mode"
> +};
> +
> +static int hslo_mux_map_value[] = {
> +	0x0, 0x1, 0x2, 0x3,
> +};

Why not just use a normal mux here, there's no missing values or
reordering?  Similarly for other muxes.

> +static unsigned int mt6357_read(struct snd_soc_component *codec, unsigned int reg)
> +{
> +	struct mt6357_priv *priv = snd_soc_component_get_drvdata(codec);
> +	unsigned int val;
> +
> +	pr_debug("%s() reg = 0x%x", __func__, reg);
> +	regmap_read(priv->regmap, reg, &val);
> +	return val;
> +}

Remove these, there are vastly more logging facilities as standard in
the regmap core.

> +/* Reg bit defines */
> +/* MT6357_GPIO_DIR0 */
> +#define GPIO8_DIR_MASK				BIT(8)
> +#define GPIO8_DIR_INPUT				0

Please namespace your defines, these look very generic.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 488 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20240226/efeb9237/attachment.sig>


More information about the Linux-mediatek mailing list