[PATCH V2 4/4] arm64: dts: mediatek: Add Cudy WR3000 V1

[Rafał Miłecki]

From: Rafał Miłecki <rafal at milecki.pl>

Cudy WR3000 V1 is an MT7981B (AKA Filogic 820) based wireless router. It
has 256 MiB of RAM, some LEDs & buttons and (not described yet) 4
Ethernet ports.

There is one slightly uncommon LED with a label of globe icon described
in the Quick Installation Guide as having 2 meanings:
1. "Not connected to the Internet"
2. "Connected to the Internet"

Vendor designed it to light up when some Internet-accessible IP can be
reached. This change will be follow by an attempt to define some
predefined FUNCTION for it.

Signed-off-by: Rafał Miłecki <rafal at milecki.pl>
---
V2: Reorder properties
    Describe online LED

 arch/arm64/boot/dts/mediatek/Makefile         |  1 +
 .../dts/mediatek/mt7981b-cudy-wr3000-v1.dts   | 74 +++++++++++++++++++
 2 files changed, 75 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 37b4ca3a87c9..96da4ad640aa 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-cudy-wr3000-v1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7981b-xiaomi-ax3000t.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-acelink-ew-7886cax.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
new file mode 100644
index 000000000000..2a988218039c
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7981b-cudy-wr3000-v1.dts
@@ -0,0 +1,74 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+/dts-v1/;
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+#include "mt7981b.dtsi"
+
+/ {
+	compatible = "cudy,wr3000-v1", "mediatek,mt7981b";
+	model = "Cudy WR3000 V1";
+
+	memory at 40000000 {
+		reg = <0 0x40000000 0 0x10000000>;
+		device_type = "memory";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		key-wps {
+			label = "WPS";
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		key-reset {
+			label = "RESET";
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&pio 5 GPIO_ACTIVE_LOW>;
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_2GHZ;
+			gpios = <&pio 6 GPIO_ACTIVE_LOW>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WLAN_5GHZ;
+			gpios = <&pio 7 GPIO_ACTIVE_LOW>;
+		};
+
+		led-3 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_LAN;
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led-4 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+
+		led-5 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = "wan-online";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
-- 
2.35.3