[PATCH v5 2/2] media: i2c: Add GC08A3 image sensor driver

Zhi Mao zhi.mao at mediatek.com
Mon Feb 19 17:25:40 PST 2024


Add a V4L2 sub-device driver for Galaxycore GC08A3 image sensor.

Signed-off-by: Zhi Mao <zhi.mao at mediatek.com>
---
 drivers/media/i2c/Kconfig  |   10 +
 drivers/media/i2c/Makefile |    1 +
 drivers/media/i2c/gc08a3.c | 1335 ++++++++++++++++++++++++++++++++++++
 3 files changed, 1346 insertions(+)
 create mode 100644 drivers/media/i2c/gc08a3.c

diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 56f276b920ab..e4da68835683 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -70,6 +70,16 @@ config VIDEO_GC0308
 	  To compile this driver as a module, choose M here: the
 	  module will be called gc0308.
 
+config VIDEO_GC08A3
+	tristate "GalaxyCore gc08a3 sensor support"
+	select V4L2_CCI_I2C
+	help
+	  This is a Video4Linux2 sensor driver for the GalaxyCore gc08a3
+	  camera.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gc08a3.
+
 config VIDEO_GC2145
 	select V4L2_CCI_I2C
 	tristate "GalaxyCore GC2145 sensor support"
diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile
index dfbe6448b549..b82e99ca7578 100644
--- a/drivers/media/i2c/Makefile
+++ b/drivers/media/i2c/Makefile
@@ -38,6 +38,7 @@ obj-$(CONFIG_VIDEO_DW9768) += dw9768.o
 obj-$(CONFIG_VIDEO_DW9807_VCM) += dw9807-vcm.o
 obj-$(CONFIG_VIDEO_ET8EK8) += et8ek8/
 obj-$(CONFIG_VIDEO_GC0308) += gc0308.o
+obj-$(CONFIG_VIDEO_GC08A3) += gc08a3.o
 obj-$(CONFIG_VIDEO_GC2145) += gc2145.o
 obj-$(CONFIG_VIDEO_HI556) += hi556.o
 obj-$(CONFIG_VIDEO_HI846) += hi846.o
diff --git a/drivers/media/i2c/gc08a3.c b/drivers/media/i2c/gc08a3.c
new file mode 100644
index 000000000000..76f19ab55b38
--- /dev/null
+++ b/drivers/media/i2c/gc08a3.c
@@ -0,0 +1,1335 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * gc08a3.c - gc08a3 sensor driver
+ *
+ * Copyright 2023 MediaTek
+ *
+ * Zhi Mao <zhi.mao at mediatek.com>
+ */
+#include <asm/unaligned.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regulator/consumer.h>
+#include <media/media-entity.h>
+#include <media/v4l2-cci.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-subdev.h>
+
+#define GC08A3_REG_TEST_PATTERN_EN CCI_REG8(0x008c)
+#define GC08A3_REG_TEST_PATTERN_IDX CCI_REG8(0x008d)
+#define GC08A3_TEST_PATTERN_EN 0x01
+
+#define GC08A3_STREAMING_REG CCI_REG8(0x0100)
+
+#define GC08A3_FLIP_REG CCI_REG8(0x0101)
+#define GC08A3_FLIP_H_MASK BIT(0)
+#define GC08A3_FLIP_V_MASK BIT(1)
+
+#define GC08A3_EXP_REG CCI_REG16(0x0202)
+#define GC08A3_EXP_MARGIN 16
+#define GC08A3_EXP_MIN 4
+#define GC08A3_EXP_STEP 1
+
+#define GC08A3_AGAIN_REG CCI_REG16(0x0204)
+#define GC08A3_AGAIN_MIN 1024
+#define GC08A3_AGAIN_MAX (1024 * 16)
+#define GC08A3_AGAIN_STEP 1
+
+#define GC08A3_FRAME_LENGTH_REG CCI_REG16(0x0340)
+#define GC08A3_VTS_MAX 0xfff0
+
+#define GC08A3_REG_CHIP_ID CCI_REG16(0x03f0)
+#define GC08A3_CHIP_ID 0x08a3
+
+#define GC08A3_NATIVE_WIDTH 3264
+#define GC08A3_NATIVE_HEIGHT 2448
+
+#define GC08A3_DEFAULT_CLK_FREQ 24000000
+#define GC08A3_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
+#define GC08A3_DATA_LANES 4
+
+#define GC08A3_RGB_DEPTH 10
+
+#define GC08A3_SLEEP_US  2000
+
+static const char *const gc08a3_test_pattern_menu[] = {
+	"No Pattern", "Solid Black", "Colour Bar", "Solid White",
+	"Solid Red", "Solid Green", "Solid Blue", "Solid Yellow",
+};
+
+static const s64 gc08a3_link_freq_menu_items[] = {
+	336000000ULL,
+	207000000ULL,
+};
+
+static const char *const gc08a3_supply_name[] = {
+	"avdd",
+	"dvdd",
+	"dovdd",
+};
+
+struct gc08a3 {
+	struct device *dev;
+	struct v4l2_subdev sd;
+	struct media_pad pad;
+
+	struct clk *xclk;
+	struct regulator_bulk_data supplies[ARRAY_SIZE(gc08a3_supply_name)];
+	struct gpio_desc *reset_gpio;
+
+	struct v4l2_ctrl_handler ctrls;
+	struct v4l2_ctrl *pixel_rate;
+	struct v4l2_ctrl *link_freq;
+	struct v4l2_ctrl *exposure;
+	struct v4l2_ctrl *vblank;
+	struct v4l2_ctrl *hblank;
+	struct v4l2_ctrl *hflip;
+	struct v4l2_ctrl *vflip;
+
+	struct regmap *regmap;
+	unsigned long link_freq_bitmap;
+	const struct gc08a3_mode *cur_mode;
+};
+
+struct gc08a3_reg_list {
+	u32 num_of_regs;
+	const struct cci_reg_sequence *regs;
+};
+
+static const struct cci_reg_sequence mode_3264x2448[] = {
+	/* system */
+	{ CCI_REG8(0x0336), 0x70 },
+	{ CCI_REG8(0x0383), 0xbb },
+	{ CCI_REG8(0x0344), 0x00 },
+	{ CCI_REG8(0x0345), 0x06 },
+	{ CCI_REG8(0x0346), 0x00 },
+	{ CCI_REG8(0x0347), 0x04 },
+	{ CCI_REG8(0x0348), 0x0c },
+	{ CCI_REG8(0x0349), 0xd0 },
+	{ CCI_REG8(0x034a), 0x09 },
+	{ CCI_REG8(0x034b), 0x9c },
+	{ CCI_REG8(0x0202), 0x09 },
+	{ CCI_REG8(0x0203), 0x04 },
+	{ CCI_REG8(0x0340), 0x09 },
+	{ CCI_REG8(0x0341), 0xf4 },
+	{ CCI_REG8(0x0342), 0x07 },
+	{ CCI_REG8(0x0343), 0x1c },
+
+	{ CCI_REG8(0x0226), 0x00 },
+	{ CCI_REG8(0x0227), 0x28 },
+	{ CCI_REG8(0x0e38), 0x49 },
+	{ CCI_REG8(0x0210), 0x13 },
+	{ CCI_REG8(0x0218), 0x00 },
+	{ CCI_REG8(0x0241), 0x88 },
+	{ CCI_REG8(0x0392), 0x60 },
+
+	/* ISP */
+	{ CCI_REG8(0x00a2), 0x00 },
+	{ CCI_REG8(0x00a3), 0x00 },
+	{ CCI_REG8(0x00ab), 0x00 },
+	{ CCI_REG8(0x00ac), 0x00 },
+
+	/* GAIN */
+	{ CCI_REG8(0x0204), 0x04 },
+	{ CCI_REG8(0x0205), 0x00 },
+	{ CCI_REG8(0x0050), 0x5c },
+	{ CCI_REG8(0x0051), 0x44 },
+
+	/* out window */
+	{ CCI_REG8(0x009a), 0x66 },
+	{ CCI_REG8(0x0351), 0x00 },
+	{ CCI_REG8(0x0352), 0x06 },
+	{ CCI_REG8(0x0353), 0x00 },
+	{ CCI_REG8(0x0354), 0x08 },
+	{ CCI_REG8(0x034c), 0x0c },
+	{ CCI_REG8(0x034d), 0xc0 },
+	{ CCI_REG8(0x034e), 0x09 },
+	{ CCI_REG8(0x034f), 0x90 },
+
+	/* MIPI */
+	{ CCI_REG8(0x0114), 0x03 },
+	{ CCI_REG8(0x0180), 0x65 },
+	{ CCI_REG8(0x0181), 0xf0 },
+	{ CCI_REG8(0x0185), 0x01 },
+	{ CCI_REG8(0x0115), 0x30 },
+	{ CCI_REG8(0x011b), 0x12 },
+	{ CCI_REG8(0x011c), 0x12 },
+	{ CCI_REG8(0x0121), 0x06 },
+	{ CCI_REG8(0x0122), 0x06 },
+	{ CCI_REG8(0x0123), 0x15 },
+	{ CCI_REG8(0x0124), 0x01 },
+	{ CCI_REG8(0x0125), 0x0b },
+	{ CCI_REG8(0x0126), 0x08 },
+	{ CCI_REG8(0x0129), 0x06 },
+	{ CCI_REG8(0x012a), 0x08 },
+	{ CCI_REG8(0x012b), 0x08 },
+
+	{ CCI_REG8(0x0a73), 0x60 },
+	{ CCI_REG8(0x0a70), 0x11 },
+	{ CCI_REG8(0x0313), 0x80 },
+	{ CCI_REG8(0x0aff), 0x00 },
+	{ CCI_REG8(0x0a70), 0x00 },
+	{ CCI_REG8(0x00a4), 0x80 },
+	{ CCI_REG8(0x0316), 0x01 },
+	{ CCI_REG8(0x0a67), 0x00 },
+	{ CCI_REG8(0x0084), 0x10 },
+	{ CCI_REG8(0x0102), 0x09 },
+};
+
+static const struct cci_reg_sequence mode_1920x1080[] = {
+	/* system */
+	{ CCI_REG8(0x0336), 0x45 },
+	{ CCI_REG8(0x0383), 0x8b },
+	{ CCI_REG8(0x0344), 0x02 },
+	{ CCI_REG8(0x0345), 0xa6 },
+	{ CCI_REG8(0x0346), 0x02 },
+	{ CCI_REG8(0x0347), 0xb0 },
+	{ CCI_REG8(0x0348), 0x07 },
+	{ CCI_REG8(0x0349), 0x90 },
+	{ CCI_REG8(0x034a), 0x04 },
+	{ CCI_REG8(0x034b), 0x44 },
+	{ CCI_REG8(0x0202), 0x03 },
+	{ CCI_REG8(0x0203), 0x00 },
+	{ CCI_REG8(0x0340), 0x04 },
+	{ CCI_REG8(0x0341), 0xfc },
+	{ CCI_REG8(0x0342), 0x07 },
+	{ CCI_REG8(0x0343), 0x1c },
+	{ CCI_REG8(0x0226), 0x00 },
+	{ CCI_REG8(0x0227), 0x88 },
+	{ CCI_REG8(0x0e38), 0x49 },
+	{ CCI_REG8(0x0210), 0x13 },
+	{ CCI_REG8(0x0218), 0x00 },
+	{ CCI_REG8(0x0241), 0x88 },
+	{ CCI_REG8(0x0392), 0x60 },
+
+	/* ISP */
+	{ CCI_REG8(0x00a2), 0xac },
+	{ CCI_REG8(0x00a3), 0x02 },
+	{ CCI_REG8(0x00ab), 0xa0 },
+	{ CCI_REG8(0x00ac), 0x02 },
+
+	/* GAIN */
+	{ CCI_REG8(0x0204), 0x04 },
+	{ CCI_REG8(0x0205), 0x00 },
+	{ CCI_REG8(0x0050), 0x38 },
+	{ CCI_REG8(0x0051), 0x20 },
+
+	/* out window */
+	{ CCI_REG8(0x009a), 0x66 },
+	{ CCI_REG8(0x0351), 0x00 },
+	{ CCI_REG8(0x0352), 0x06 },
+	{ CCI_REG8(0x0353), 0x00 },
+	{ CCI_REG8(0x0354), 0x08 },
+	{ CCI_REG8(0x034c), 0x07 },
+	{ CCI_REG8(0x034d), 0x80 },
+	{ CCI_REG8(0x034e), 0x04 },
+	{ CCI_REG8(0x034f), 0x38 },
+
+	/* MIPI */
+	{ CCI_REG8(0x0114), 0x03 },
+	{ CCI_REG8(0x0180), 0x65 },
+	{ CCI_REG8(0x0181), 0xf0 },
+	{ CCI_REG8(0x0185), 0x01 },
+	{ CCI_REG8(0x0115), 0x30 },
+	{ CCI_REG8(0x011b), 0x12 },
+	{ CCI_REG8(0x011c), 0x12 },
+	{ CCI_REG8(0x0121), 0x02 },
+	{ CCI_REG8(0x0122), 0x03 },
+	{ CCI_REG8(0x0123), 0x0c },
+	{ CCI_REG8(0x0124), 0x00 },
+	{ CCI_REG8(0x0125), 0x09 },
+	{ CCI_REG8(0x0126), 0x06 },
+	{ CCI_REG8(0x0129), 0x04 },
+	{ CCI_REG8(0x012a), 0x03 },
+	{ CCI_REG8(0x012b), 0x06 },
+
+	{ CCI_REG8(0x0a73), 0x60 },
+	{ CCI_REG8(0x0a70), 0x11 },
+	{ CCI_REG8(0x0313), 0x80 },
+	{ CCI_REG8(0x0aff), 0x00 },
+	{ CCI_REG8(0x0a70), 0x00 },
+	{ CCI_REG8(0x00a4), 0x80 },
+	{ CCI_REG8(0x0316), 0x01 },
+	{ CCI_REG8(0x0a67), 0x00 },
+	{ CCI_REG8(0x0084), 0x10 },
+	{ CCI_REG8(0x0102), 0x09 },
+};
+
+static const struct cci_reg_sequence mode_table_common[] = {
+	{ GC08A3_STREAMING_REG, 0x00 },
+	/* system */
+	{ CCI_REG8(0x031c), 0x60 },
+	{ CCI_REG8(0x0337), 0x04 },
+	{ CCI_REG8(0x0335), 0x51 },
+	{ CCI_REG8(0x0336), 0x70 },
+	{ CCI_REG8(0x0383), 0xbb },
+	{ CCI_REG8(0x031a), 0x00 },
+	{ CCI_REG8(0x0321), 0x10 },
+	{ CCI_REG8(0x0327), 0x03 },
+	{ CCI_REG8(0x0325), 0x40 },
+	{ CCI_REG8(0x0326), 0x23 },
+	{ CCI_REG8(0x0314), 0x11 },
+	{ CCI_REG8(0x0315), 0xd6 },
+	{ CCI_REG8(0x0316), 0x01 },
+	{ CCI_REG8(0x0334), 0x40 },
+	{ CCI_REG8(0x0324), 0x42 },
+	{ CCI_REG8(0x031c), 0x00 },
+	{ CCI_REG8(0x031c), 0x9f },
+	{ CCI_REG8(0x039a), 0x13 },
+	{ CCI_REG8(0x0084), 0x30 },
+	{ CCI_REG8(0x02b3), 0x08 },
+	{ CCI_REG8(0x0057), 0x0c },
+	{ CCI_REG8(0x05c3), 0x50 },
+	{ CCI_REG8(0x0311), 0x90 },
+	{ CCI_REG8(0x05a0), 0x02 },
+	{ CCI_REG8(0x0074), 0x0a },
+	{ CCI_REG8(0x0059), 0x11 },
+	{ CCI_REG8(0x0070), 0x05 },
+	{ CCI_REG8(0x0101), 0x00 },
+
+	/* analog */
+	{ CCI_REG8(0x0344), 0x00 },
+	{ CCI_REG8(0x0345), 0x06 },
+	{ CCI_REG8(0x0346), 0x00 },
+	{ CCI_REG8(0x0347), 0x04 },
+	{ CCI_REG8(0x0348), 0x0c },
+	{ CCI_REG8(0x0349), 0xd0 },
+	{ CCI_REG8(0x034a), 0x09 },
+	{ CCI_REG8(0x034b), 0x9c },
+	{ CCI_REG8(0x0202), 0x09 },
+	{ CCI_REG8(0x0203), 0x04 },
+
+	{ CCI_REG8(0x0219), 0x05 },
+	{ CCI_REG8(0x0226), 0x00 },
+	{ CCI_REG8(0x0227), 0x28 },
+	{ CCI_REG8(0x0e0a), 0x00 },
+	{ CCI_REG8(0x0e0b), 0x00 },
+	{ CCI_REG8(0x0e24), 0x04 },
+	{ CCI_REG8(0x0e25), 0x04 },
+	{ CCI_REG8(0x0e26), 0x00 },
+	{ CCI_REG8(0x0e27), 0x10 },
+	{ CCI_REG8(0x0e01), 0x74 },
+	{ CCI_REG8(0x0e03), 0x47 },
+	{ CCI_REG8(0x0e04), 0x33 },
+	{ CCI_REG8(0x0e05), 0x44 },
+	{ CCI_REG8(0x0e06), 0x44 },
+	{ CCI_REG8(0x0e0c), 0x1e },
+	{ CCI_REG8(0x0e17), 0x3a },
+	{ CCI_REG8(0x0e18), 0x3c },
+	{ CCI_REG8(0x0e19), 0x40 },
+	{ CCI_REG8(0x0e1a), 0x42 },
+	{ CCI_REG8(0x0e28), 0x21 },
+	{ CCI_REG8(0x0e2b), 0x68 },
+	{ CCI_REG8(0x0e2c), 0x0d },
+	{ CCI_REG8(0x0e2d), 0x08 },
+	{ CCI_REG8(0x0e34), 0xf4 },
+	{ CCI_REG8(0x0e35), 0x44 },
+	{ CCI_REG8(0x0e36), 0x07 },
+	{ CCI_REG8(0x0e38), 0x49 },
+	{ CCI_REG8(0x0210), 0x13 },
+	{ CCI_REG8(0x0218), 0x00 },
+	{ CCI_REG8(0x0241), 0x88 },
+	{ CCI_REG8(0x0e32), 0x00 },
+	{ CCI_REG8(0x0e33), 0x18 },
+	{ CCI_REG8(0x0e42), 0x03 },
+	{ CCI_REG8(0x0e43), 0x80 },
+	{ CCI_REG8(0x0e44), 0x04 },
+	{ CCI_REG8(0x0e45), 0x00 },
+	{ CCI_REG8(0x0e4f), 0x04 },
+	{ CCI_REG8(0x057a), 0x20 },
+	{ CCI_REG8(0x0381), 0x7c },
+	{ CCI_REG8(0x0382), 0x9b },
+	{ CCI_REG8(0x0384), 0xfb },
+	{ CCI_REG8(0x0389), 0x38 },
+	{ CCI_REG8(0x038a), 0x03 },
+	{ CCI_REG8(0x0390), 0x6a },
+	{ CCI_REG8(0x0391), 0x0b },
+	{ CCI_REG8(0x0392), 0x60 },
+	{ CCI_REG8(0x0393), 0xc1 },
+	{ CCI_REG8(0x0396), 0xff },
+	{ CCI_REG8(0x0398), 0x62 },
+
+	/* cisctl reset */
+	{ CCI_REG8(0x031c), 0x80 },
+	{ CCI_REG8(0x03fe), 0x10 },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x031c), 0x9f },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x031c), 0x80 },
+	{ CCI_REG8(0x03fe), 0x10 },
+	{ CCI_REG8(0x03fe), 0x00 },
+	{ CCI_REG8(0x031c), 0x9f },
+	{ CCI_REG8(0x0360), 0x01 },
+	{ CCI_REG8(0x0360), 0x00 },
+	{ CCI_REG8(0x0316), 0x09 },
+	{ CCI_REG8(0x0a67), 0x80 },
+	{ CCI_REG8(0x0313), 0x00 },
+	{ CCI_REG8(0x0a53), 0x0e },
+	{ CCI_REG8(0x0a65), 0x17 },
+	{ CCI_REG8(0x0a68), 0xa1 },
+	{ CCI_REG8(0x0a58), 0x00 },
+	{ CCI_REG8(0x0ace), 0x0c },
+	{ CCI_REG8(0x00a4), 0x00 },
+	{ CCI_REG8(0x00a5), 0x01 },
+	{ CCI_REG8(0x00a7), 0x09 },
+	{ CCI_REG8(0x00a8), 0x9c },
+	{ CCI_REG8(0x00a9), 0x0c },
+	{ CCI_REG8(0x00aa), 0xd0 },
+	{ CCI_REG8(0x0a8a), 0x00 },
+	{ CCI_REG8(0x0a8b), 0xe0 },
+	{ CCI_REG8(0x0a8c), 0x13 },
+	{ CCI_REG8(0x0a8d), 0xe8 },
+	{ CCI_REG8(0x0a90), 0x0a },
+	{ CCI_REG8(0x0a91), 0x10 },
+	{ CCI_REG8(0x0a92), 0xf8 },
+	{ CCI_REG8(0x0a71), 0xf2 },
+	{ CCI_REG8(0x0a72), 0x12 },
+	{ CCI_REG8(0x0a73), 0x64 },
+	{ CCI_REG8(0x0a75), 0x41 },
+	{ CCI_REG8(0x0a70), 0x07 },
+	{ CCI_REG8(0x0313), 0x80 },
+
+	/* ISP */
+	{ CCI_REG8(0x00a0), 0x01 },
+	{ CCI_REG8(0x0080), 0xd2 },
+	{ CCI_REG8(0x0081), 0x3f },
+	{ CCI_REG8(0x0087), 0x51 },
+	{ CCI_REG8(0x0089), 0x03 },
+	{ CCI_REG8(0x009b), 0x40 },
+	{ CCI_REG8(0x05a0), 0x82 },
+	{ CCI_REG8(0x05ac), 0x00 },
+	{ CCI_REG8(0x05ad), 0x01 },
+	{ CCI_REG8(0x05ae), 0x00 },
+	{ CCI_REG8(0x0800), 0x0a },
+	{ CCI_REG8(0x0801), 0x14 },
+	{ CCI_REG8(0x0802), 0x28 },
+	{ CCI_REG8(0x0803), 0x34 },
+	{ CCI_REG8(0x0804), 0x0e },
+	{ CCI_REG8(0x0805), 0x33 },
+	{ CCI_REG8(0x0806), 0x03 },
+	{ CCI_REG8(0x0807), 0x8a },
+	{ CCI_REG8(0x0808), 0x50 },
+	{ CCI_REG8(0x0809), 0x00 },
+	{ CCI_REG8(0x080a), 0x34 },
+	{ CCI_REG8(0x080b), 0x03 },
+	{ CCI_REG8(0x080c), 0x26 },
+	{ CCI_REG8(0x080d), 0x03 },
+	{ CCI_REG8(0x080e), 0x18 },
+	{ CCI_REG8(0x080f), 0x03 },
+	{ CCI_REG8(0x0810), 0x10 },
+	{ CCI_REG8(0x0811), 0x03 },
+	{ CCI_REG8(0x0812), 0x00 },
+	{ CCI_REG8(0x0813), 0x00 },
+	{ CCI_REG8(0x0814), 0x01 },
+	{ CCI_REG8(0x0815), 0x00 },
+	{ CCI_REG8(0x0816), 0x01 },
+	{ CCI_REG8(0x0817), 0x00 },
+	{ CCI_REG8(0x0818), 0x00 },
+	{ CCI_REG8(0x0819), 0x0a },
+	{ CCI_REG8(0x081a), 0x01 },
+	{ CCI_REG8(0x081b), 0x6c },
+	{ CCI_REG8(0x081c), 0x00 },
+	{ CCI_REG8(0x081d), 0x0b },
+	{ CCI_REG8(0x081e), 0x02 },
+	{ CCI_REG8(0x081f), 0x00 },
+	{ CCI_REG8(0x0820), 0x00 },
+	{ CCI_REG8(0x0821), 0x0c },
+	{ CCI_REG8(0x0822), 0x02 },
+	{ CCI_REG8(0x0823), 0xd9 },
+	{ CCI_REG8(0x0824), 0x00 },
+	{ CCI_REG8(0x0825), 0x0d },
+	{ CCI_REG8(0x0826), 0x03 },
+	{ CCI_REG8(0x0827), 0xf0 },
+	{ CCI_REG8(0x0828), 0x00 },
+	{ CCI_REG8(0x0829), 0x0e },
+	{ CCI_REG8(0x082a), 0x05 },
+	{ CCI_REG8(0x082b), 0x94 },
+	{ CCI_REG8(0x082c), 0x09 },
+	{ CCI_REG8(0x082d), 0x6e },
+	{ CCI_REG8(0x082e), 0x07 },
+	{ CCI_REG8(0x082f), 0xe6 },
+	{ CCI_REG8(0x0830), 0x10 },
+	{ CCI_REG8(0x0831), 0x0e },
+	{ CCI_REG8(0x0832), 0x0b },
+	{ CCI_REG8(0x0833), 0x2c },
+	{ CCI_REG8(0x0834), 0x14 },
+	{ CCI_REG8(0x0835), 0xae },
+	{ CCI_REG8(0x0836), 0x0f },
+	{ CCI_REG8(0x0837), 0xc4 },
+	{ CCI_REG8(0x0838), 0x18 },
+	{ CCI_REG8(0x0839), 0x0e },
+	{ CCI_REG8(0x05ac), 0x01 },
+	{ CCI_REG8(0x059a), 0x00 },
+	{ CCI_REG8(0x059b), 0x00 },
+	{ CCI_REG8(0x059c), 0x01 },
+	{ CCI_REG8(0x0598), 0x00 },
+	{ CCI_REG8(0x0597), 0x14 },
+	{ CCI_REG8(0x05ab), 0x09 },
+	{ CCI_REG8(0x05a4), 0x02 },
+	{ CCI_REG8(0x05a3), 0x05 },
+	{ CCI_REG8(0x05a0), 0xc2 },
+	{ CCI_REG8(0x0207), 0xc4 },
+
+	/* GAIN */
+	{ CCI_REG8(0x0208), 0x01 },
+	{ CCI_REG8(0x0209), 0x72 },
+	{ CCI_REG8(0x0204), 0x04 },
+	{ CCI_REG8(0x0205), 0x00 },
+
+	{ CCI_REG8(0x0040), 0x22 },
+	{ CCI_REG8(0x0041), 0x20 },
+	{ CCI_REG8(0x0043), 0x10 },
+	{ CCI_REG8(0x0044), 0x00 },
+	{ CCI_REG8(0x0046), 0x08 },
+	{ CCI_REG8(0x0047), 0xf0 },
+	{ CCI_REG8(0x0048), 0x0f },
+	{ CCI_REG8(0x004b), 0x0f },
+	{ CCI_REG8(0x004c), 0x00 },
+	{ CCI_REG8(0x0050), 0x5c },
+	{ CCI_REG8(0x0051), 0x44 },
+	{ CCI_REG8(0x005b), 0x03 },
+	{ CCI_REG8(0x00c0), 0x00 },
+	{ CCI_REG8(0x00c1), 0x80 },
+	{ CCI_REG8(0x00c2), 0x31 },
+	{ CCI_REG8(0x00c3), 0x00 },
+	{ CCI_REG8(0x0460), 0x04 },
+	{ CCI_REG8(0x0462), 0x08 },
+	{ CCI_REG8(0x0464), 0x0e },
+	{ CCI_REG8(0x0466), 0x0a },
+	{ CCI_REG8(0x0468), 0x12 },
+	{ CCI_REG8(0x046a), 0x12 },
+	{ CCI_REG8(0x046c), 0x10 },
+	{ CCI_REG8(0x046e), 0x0c },
+	{ CCI_REG8(0x0461), 0x03 },
+	{ CCI_REG8(0x0463), 0x03 },
+	{ CCI_REG8(0x0465), 0x03 },
+	{ CCI_REG8(0x0467), 0x03 },
+	{ CCI_REG8(0x0469), 0x04 },
+	{ CCI_REG8(0x046b), 0x04 },
+	{ CCI_REG8(0x046d), 0x04 },
+	{ CCI_REG8(0x046f), 0x04 },
+	{ CCI_REG8(0x0470), 0x04 },
+	{ CCI_REG8(0x0472), 0x10 },
+	{ CCI_REG8(0x0474), 0x26 },
+	{ CCI_REG8(0x0476), 0x38 },
+	{ CCI_REG8(0x0478), 0x20 },
+	{ CCI_REG8(0x047a), 0x30 },
+	{ CCI_REG8(0x047c), 0x38 },
+	{ CCI_REG8(0x047e), 0x60 },
+	{ CCI_REG8(0x0471), 0x05 },
+	{ CCI_REG8(0x0473), 0x05 },
+	{ CCI_REG8(0x0475), 0x05 },
+	{ CCI_REG8(0x0477), 0x05 },
+	{ CCI_REG8(0x0479), 0x04 },
+	{ CCI_REG8(0x047b), 0x04 },
+	{ CCI_REG8(0x047d), 0x04 },
+	{ CCI_REG8(0x047f), 0x04 },
+};
+
+struct gc08a3_mode {
+	u32 width;
+	u32 height;
+	const struct gc08a3_reg_list reg_list;
+
+	u32 hts; /* Horizontal timining size */
+	u32 vts_def; /* Default vertical timining size */
+	u32 vts_min; /* Min vertical timining size */
+};
+
+/* Declare modes in order, from biggest to smallest height. */
+static const struct gc08a3_mode gc08a3_modes[] = {
+	{
+		/* 3264*2448 at 30fps */
+		.width = GC08A3_NATIVE_WIDTH,
+		.height = GC08A3_NATIVE_HEIGHT,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_3264x2448),
+			.regs = mode_3264x2448,
+		},
+		.hts = 3640,
+		.vts_def = 2548,
+		.vts_min = 2548,
+	},
+	{
+		/* 1920*1080 at 60fps */
+		.width = 1920,
+		.height = 1080,
+		.reg_list = {
+			.num_of_regs = ARRAY_SIZE(mode_1920x1080),
+			.regs = mode_1920x1080,
+		},
+		.hts = 3640,
+		.vts_def = 1276,
+		.vts_min = 1276,
+	},
+};
+
+static inline struct gc08a3 *to_gc08a3(struct v4l2_subdev *sd)
+{
+	return container_of(sd, struct gc08a3, sd);
+}
+
+static int gc08a3_power_on(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct gc08a3 *gc08a3 = to_gc08a3(sd);
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(gc08a3_supply_name),
+				    gc08a3->supplies);
+	if (ret < 0) {
+		dev_err(gc08a3->dev, "failed to enable regulators: %d\n", ret);
+		return ret;
+	}
+
+	ret = clk_prepare_enable(gc08a3->xclk);
+	if (ret < 0) {
+		regulator_bulk_disable(ARRAY_SIZE(gc08a3_supply_name),
+				       gc08a3->supplies);
+		dev_err(gc08a3->dev, "clk prepare enable failed\n");
+		return ret;
+	}
+
+	fsleep(GC08A3_SLEEP_US);
+
+	gpiod_set_value_cansleep(gc08a3->reset_gpio, 1);
+	fsleep(GC08A3_SLEEP_US);
+
+	return 0;
+}
+
+static int gc08a3_power_off(struct device *dev)
+{
+	struct v4l2_subdev *sd = dev_get_drvdata(dev);
+	struct gc08a3 *gc08a3 = to_gc08a3(sd);
+
+	clk_disable_unprepare(gc08a3->xclk);
+	gpiod_set_value_cansleep(gc08a3->reset_gpio, 0);
+	regulator_bulk_disable(ARRAY_SIZE(gc08a3_supply_name),
+			       gc08a3->supplies);
+
+	return 0;
+}
+
+static int gc08a3_enum_mbus_code(struct v4l2_subdev *sd,
+				 struct v4l2_subdev_state *sd_state,
+				 struct v4l2_subdev_mbus_code_enum *code)
+{
+	if (code->index > 0)
+		return -EINVAL;
+
+	code->code = GC08A3_MBUS_CODE;
+
+	return 0;
+}
+
+static int gc08a3_enum_frame_size(struct v4l2_subdev *subdev,
+				  struct v4l2_subdev_state *sd_state,
+				  struct v4l2_subdev_frame_size_enum *fse)
+{
+	if (fse->code != GC08A3_MBUS_CODE)
+		return -EINVAL;
+
+	if (fse->index >= ARRAY_SIZE(gc08a3_modes))
+		return -EINVAL;
+
+	fse->min_width = gc08a3_modes[fse->index].width;
+	fse->max_width = gc08a3_modes[fse->index].width;
+	fse->min_height = gc08a3_modes[fse->index].height;
+	fse->max_height = gc08a3_modes[fse->index].height;
+
+	return 0;
+}
+
+static int gc08a3_update_cur_mode_controls(struct gc08a3 *gc08a3,
+					   const struct gc08a3_mode *mode)
+{
+	s64 exposure_max, h_blank;
+	int ret;
+
+	ret = __v4l2_ctrl_modify_range(gc08a3->vblank,
+				       mode->vts_min - mode->height,
+				       GC08A3_VTS_MAX - mode->height, 1,
+				       mode->vts_def - mode->height);
+	if (ret) {
+		dev_err(gc08a3->dev, "VB ctrl range update failed\n");
+		return ret;
+	}
+
+	h_blank = mode->hts - mode->width;
+	ret = __v4l2_ctrl_modify_range(gc08a3->hblank, h_blank, h_blank, 1,
+				       h_blank);
+	if (ret) {
+		dev_err(gc08a3->dev, "HB ctrl range update failed\n");
+		return ret;
+	}
+
+	exposure_max = mode->vts_def - GC08A3_EXP_MARGIN;
+	ret = __v4l2_ctrl_modify_range(gc08a3->exposure, GC08A3_EXP_MIN,
+				       exposure_max, GC08A3_EXP_STEP,
+				       exposure_max);
+	if (ret) {
+		dev_err(gc08a3->dev, "exposure ctrl range update failed\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static void gc08a3_update_pad_format(struct gc08a3 *gc08a3,
+				     const struct gc08a3_mode *mode,
+				     struct v4l2_mbus_framefmt *fmt)
+{
+	fmt->width = mode->width;
+	fmt->height = mode->height;
+	fmt->code = GC08A3_MBUS_CODE;
+	fmt->field = V4L2_FIELD_NONE;
+	fmt->colorspace = V4L2_COLORSPACE_RAW;
+	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
+	fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE;
+	fmt->xfer_func = V4L2_XFER_FUNC_NONE;
+}
+
+static int gc08a3_set_format(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_state *state,
+			     struct v4l2_subdev_format *fmt)
+{
+	struct gc08a3 *gc08a3 = to_gc08a3(sd);
+	struct v4l2_mbus_framefmt *mbus_fmt;
+	struct v4l2_rect *crop;
+	const struct gc08a3_mode *mode;
+
+	mode = v4l2_find_nearest_size(gc08a3_modes, ARRAY_SIZE(gc08a3_modes),
+				      width, height, fmt->format.width,
+				      fmt->format.height);
+
+	/*update crop info to subdev state*/
+	crop = v4l2_subdev_state_get_crop(state, 0);
+	crop->width = mode->width;
+	crop->height = mode->height;
+
+	/*update fmt info to subdev state*/
+	gc08a3_update_pad_format(gc08a3, mode, &fmt->format);
+	mbus_fmt = v4l2_subdev_state_get_format(state, 0);
+	*mbus_fmt = fmt->format;
+
+	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY)
+		return 0;
+
+	gc08a3->cur_mode = mode;
+	gc08a3_update_cur_mode_controls(gc08a3, mode);
+
+	return 0;
+}
+
+static int gc08a3_get_selection(struct v4l2_subdev *sd,
+				struct v4l2_subdev_state *state,
+				struct v4l2_subdev_selection *sel)
+{
+	switch (sel->target) {
+	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP:
+		sel->r = *v4l2_subdev_state_get_crop(state, 0);
+		break;
+	case V4L2_SEL_TGT_CROP_BOUNDS:
+		sel->r.top = 0;
+		sel->r.left = 0;
+		sel->r.width = GC08A3_NATIVE_WIDTH;
+		sel->r.height = GC08A3_NATIVE_HEIGHT;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int gc08a3_init_state(struct v4l2_subdev *sd,
+			     struct v4l2_subdev_state *state)
+{
+	struct v4l2_subdev_format fmt = {
+		.which = V4L2_SUBDEV_FORMAT_TRY,
+		.pad = 0,
+		.format = {
+			.code = GC08A3_MBUS_CODE,
+			.width = gc08a3_modes[0].width,
+			.height = gc08a3_modes[0].height,
+		},
+	};
+
+	gc08a3_set_format(sd, state, &fmt);
+
+	return 0;
+}
+
+static int gc08a3_set_ctrl_hflip(struct gc08a3 *gc08a3, u32 ctrl_val)
+{
+	int ret;
+	u64 val;
+
+	ret = cci_read(gc08a3->regmap, GC08A3_FLIP_REG, &val, NULL);
+	if (ret) {
+		dev_err(gc08a3->dev, "read hflip register failed: %d\n", ret);
+		return ret;
+	}
+
+	return cci_update_bits(gc08a3->regmap, GC08A3_FLIP_REG,
+			       GC08A3_FLIP_H_MASK,
+			       ctrl_val ? GC08A3_FLIP_H_MASK : 0, NULL);
+}
+
+static int gc08a3_set_ctrl_vflip(struct gc08a3 *gc08a3, u32 ctrl_val)
+{
+	int ret;
+	u64 val;
+
+	ret = cci_read(gc08a3->regmap, GC08A3_FLIP_REG, &val, NULL);
+	if (ret) {
+		dev_err(gc08a3->dev, "read vflip register failed: %d\n", ret);
+		return ret;
+	}
+
+	return cci_update_bits(gc08a3->regmap, GC08A3_FLIP_REG,
+			       GC08A3_FLIP_V_MASK,
+			       ctrl_val ? GC08A3_FLIP_V_MASK : 0, NULL);
+}
+
+static int gc08a3_test_pattern(struct gc08a3 *gc08a3, u32 pattern_menu)
+{
+	u32 pattern = 0;
+	int ret;
+
+	if (pattern_menu) {
+		switch (pattern_menu) {
+		case 1:
+			pattern = 0x00;
+			break;
+		case 2:
+			pattern = 0x10;
+			break;
+		case 3:
+		case 4:
+		case 5:
+		case 6:
+		case 7:
+			pattern = pattern_menu + 1;
+			break;
+		}
+
+		ret = cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_IDX,
+				pattern, NULL);
+		if (ret)
+			return ret;
+
+		ret = cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_EN,
+				GC08A3_TEST_PATTERN_EN, NULL);
+		if (ret)
+			return ret;
+	} else {
+		ret = cci_write(gc08a3->regmap, GC08A3_REG_TEST_PATTERN_EN,
+				0x00, NULL);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int gc08a3_set_ctrl(struct v4l2_ctrl *ctrl)
+{
+	struct gc08a3 *gc08a3 =
+		container_of(ctrl->handler, struct gc08a3, ctrls);
+	int ret = 0;
+	s64 exposure_max;
+	struct v4l2_subdev_state *state;
+	const struct v4l2_mbus_framefmt *format;
+
+	state = v4l2_subdev_get_locked_active_state(&gc08a3->sd);
+	format = v4l2_subdev_state_get_format(state, 0);
+
+	if (ctrl->id == V4L2_CID_VBLANK) {
+		/* Update max exposure while meeting expected vblanking */
+		exposure_max = format->height + ctrl->val - GC08A3_EXP_MARGIN;
+		__v4l2_ctrl_modify_range(gc08a3->exposure,
+					 gc08a3->exposure->minimum,
+					 exposure_max, gc08a3->exposure->step,
+					 exposure_max);
+	}
+
+	/*
+	 * Applying V4L2 control value only happens
+	 * when power is on for streaming
+	 */
+	if (!pm_runtime_get_if_in_use(gc08a3->dev))
+		return 0;
+
+	switch (ctrl->id) {
+	case V4L2_CID_EXPOSURE:
+		ret = cci_write(gc08a3->regmap, GC08A3_EXP_REG,
+				ctrl->val, NULL);
+		break;
+
+	case V4L2_CID_ANALOGUE_GAIN:
+		ret = cci_write(gc08a3->regmap, GC08A3_AGAIN_REG,
+				ctrl->val, NULL);
+		break;
+
+	case V4L2_CID_VBLANK:
+		ret = cci_write(gc08a3->regmap, GC08A3_FRAME_LENGTH_REG,
+				gc08a3->cur_mode->height + ctrl->val, NULL);
+		break;
+
+	case V4L2_CID_HFLIP:
+		ret = gc08a3_set_ctrl_hflip(gc08a3, ctrl->val);
+		break;
+
+	case V4L2_CID_VFLIP:
+		ret = gc08a3_set_ctrl_vflip(gc08a3, ctrl->val);
+		break;
+
+	case V4L2_CID_TEST_PATTERN:
+		ret = gc08a3_test_pattern(gc08a3, ctrl->val);
+		break;
+
+	default:
+		break;
+	}
+
+	pm_runtime_put(gc08a3->dev);
+
+	return ret;
+}
+
+static const struct v4l2_ctrl_ops gc08a3_ctrl_ops = {
+	.s_ctrl = gc08a3_set_ctrl,
+};
+
+static int gc08a3_start_streaming(struct gc08a3 *gc08a3)
+{
+	const struct gc08a3_mode *mode;
+	const struct gc08a3_reg_list *reg_list;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(gc08a3->dev);
+	if (ret < 0)
+		return ret;
+
+	ret = cci_multi_reg_write(gc08a3->regmap,
+				  mode_table_common,
+				  ARRAY_SIZE(mode_table_common), NULL);
+	if (ret)
+		goto err_rpm_put;
+
+	mode = gc08a3->cur_mode;
+	reg_list = &mode->reg_list;
+	ret = cci_multi_reg_write(gc08a3->regmap,
+				  reg_list->regs, reg_list->num_of_regs, NULL);
+	if (ret < 0)
+		goto err_rpm_put;
+
+	ret = __v4l2_ctrl_handler_setup(&gc08a3->ctrls);
+	if (ret < 0) {
+		dev_err(gc08a3->dev, "could not sync v4l2 controls\n");
+		goto err_rpm_put;
+	}
+
+	ret = cci_write(gc08a3->regmap, GC08A3_STREAMING_REG, 1, NULL);
+	if (ret < 0) {
+		dev_err(gc08a3->dev, "write STRAEMING_REG failed: %d\n", ret);
+		goto err_rpm_put;
+	}
+
+	return 0;
+
+err_rpm_put:
+	pm_runtime_put(gc08a3->dev);
+	return ret;
+}
+
+static int gc08a3_stop_streaming(struct gc08a3 *gc08a3)
+{
+	int ret;
+
+	ret = cci_write(gc08a3->regmap, GC08A3_STREAMING_REG, 0, NULL);
+	if (ret < 0)
+		dev_err(gc08a3->dev, "could not sent stop streaming %d\n", ret);
+
+	pm_runtime_put(gc08a3->dev);
+	return ret;
+}
+
+static int gc08a3_s_stream(struct v4l2_subdev *subdev, int enable)
+{
+	struct gc08a3 *gc08a3 = to_gc08a3(subdev);
+	struct v4l2_subdev_state *state;
+	int ret;
+
+	state = v4l2_subdev_lock_and_get_active_state(subdev);
+
+	if (enable)
+		ret = gc08a3_start_streaming(gc08a3);
+	else
+		ret = gc08a3_stop_streaming(gc08a3);
+
+	v4l2_subdev_unlock_state(state);
+
+	return ret;
+}
+
+static const struct v4l2_subdev_video_ops gc08a3_video_ops = {
+	.s_stream = gc08a3_s_stream,
+};
+
+static const struct v4l2_subdev_pad_ops gc08a3_subdev_pad_ops = {
+	.enum_mbus_code = gc08a3_enum_mbus_code,
+	.enum_frame_size = gc08a3_enum_frame_size,
+	.get_fmt = v4l2_subdev_get_fmt,
+	.set_fmt = gc08a3_set_format,
+	.get_selection = gc08a3_get_selection,
+};
+
+static const struct v4l2_subdev_core_ops gc08a3_core_ops = {
+	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
+	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
+};
+
+static const struct v4l2_subdev_ops gc08a3_subdev_ops = {
+	.core = &gc08a3_core_ops,
+	.video = &gc08a3_video_ops,
+	.pad = &gc08a3_subdev_pad_ops,
+};
+
+static const struct v4l2_subdev_internal_ops gc08a3_internal_ops = {
+	.init_state = gc08a3_init_state,
+};
+
+static int gc08a3_get_regulators(struct device *dev, struct gc08a3 *gc08a3)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(gc08a3_supply_name); i++)
+		gc08a3->supplies[i].supply = gc08a3_supply_name[i];
+
+	return devm_regulator_bulk_get(dev, ARRAY_SIZE(gc08a3_supply_name),
+				       gc08a3->supplies);
+}
+
+static int gc08a3_parse_fwnode(struct gc08a3 *gc08a3)
+{
+	struct fwnode_handle *endpoint;
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_CSI2_DPHY,
+	};
+	int ret;
+	struct device *dev = gc08a3->dev;
+
+	endpoint =
+		fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
+						FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!endpoint) {
+		dev_err(dev, "endpoint node not found\n");
+		return -EINVAL;
+	}
+
+	ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
+	if (ret) {
+		dev_err(dev, "parsing endpoint node failed\n");
+		goto done;
+	}
+
+	ret = v4l2_link_freq_to_bitmap(dev, bus_cfg.link_frequencies,
+				       bus_cfg.nr_of_link_frequencies,
+				       gc08a3_link_freq_menu_items,
+				       ARRAY_SIZE(gc08a3_link_freq_menu_items),
+				       &gc08a3->link_freq_bitmap);
+	if (ret)
+		goto done;
+
+done:
+	v4l2_fwnode_endpoint_free(&bus_cfg);
+	fwnode_handle_put(endpoint);
+	return ret;
+}
+
+static u64 gc08a3_to_pixel_rate(u32 f_index)
+{
+	u64 pixel_rate =
+		gc08a3_link_freq_menu_items[f_index] * 2 * GC08A3_DATA_LANES;
+
+	return div_u64(pixel_rate, GC08A3_RGB_DEPTH);
+}
+
+static int gc08a3_init_controls(struct gc08a3 *gc08a3)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(&gc08a3->sd);
+	const struct gc08a3_mode *mode = &gc08a3_modes[0];
+	const struct v4l2_ctrl_ops *ops = &gc08a3_ctrl_ops;
+	struct v4l2_fwnode_device_properties props;
+	struct v4l2_ctrl_handler *ctrl_hdlr;
+	s64 exposure_max, h_blank;
+	int ret;
+
+	ctrl_hdlr = &gc08a3->ctrls;
+	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 9);
+	if (ret)
+		return ret;
+
+	gc08a3->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
+					  V4L2_CID_HFLIP, 0, 1, 1, 0);
+	gc08a3->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
+					  V4L2_CID_VFLIP, 0, 1, 1, 0);
+	v4l2_ctrl_cluster(2, &gc08a3->hflip);
+
+	gc08a3->link_freq =
+	v4l2_ctrl_new_int_menu(ctrl_hdlr,
+			       &gc08a3_ctrl_ops,
+			       V4L2_CID_LINK_FREQ,
+			       ARRAY_SIZE(gc08a3_link_freq_menu_items) - 1,
+			       0,
+			       gc08a3_link_freq_menu_items);
+	if (gc08a3->link_freq)
+		gc08a3->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	gc08a3->pixel_rate =
+		v4l2_ctrl_new_std(ctrl_hdlr,
+				  &gc08a3_ctrl_ops,
+				  V4L2_CID_PIXEL_RATE, 0,
+				  gc08a3_to_pixel_rate(0),
+				  1,
+				  gc08a3_to_pixel_rate(0));
+
+	gc08a3->vblank =
+		v4l2_ctrl_new_std(ctrl_hdlr,
+				  &gc08a3_ctrl_ops, V4L2_CID_VBLANK,
+				  mode->vts_min - mode->height,
+				  GC08A3_VTS_MAX - mode->height, 1,
+				  mode->vts_def - mode->height);
+
+	h_blank = mode->hts - mode->width;
+	gc08a3->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
+					   V4L2_CID_HBLANK, h_blank, h_blank, 1,
+					   h_blank);
+	if (gc08a3->hblank)
+		gc08a3->hblank->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
+	v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
+			  V4L2_CID_ANALOGUE_GAIN, GC08A3_AGAIN_MIN,
+			  GC08A3_AGAIN_MAX, GC08A3_AGAIN_STEP,
+			  GC08A3_AGAIN_MIN);
+
+	exposure_max = mode->vts_def - GC08A3_EXP_MARGIN;
+	gc08a3->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &gc08a3_ctrl_ops,
+					     V4L2_CID_EXPOSURE, GC08A3_EXP_MIN,
+					     exposure_max, GC08A3_EXP_STEP,
+					     exposure_max);
+
+	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &gc08a3_ctrl_ops,
+				     V4L2_CID_TEST_PATTERN,
+				     ARRAY_SIZE(gc08a3_test_pattern_menu) - 1,
+				     0, 0, gc08a3_test_pattern_menu);
+
+	/* register properties to fwnode (e.g. rotation, orientation) */
+	ret = v4l2_fwnode_device_parse(&client->dev, &props);
+	if (ret)
+		goto error_ctrls;
+
+	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, ops, &props);
+	if (ret)
+		goto error_ctrls;
+
+	if (ctrl_hdlr->error) {
+		ret = ctrl_hdlr->error;
+		goto error_ctrls;
+	}
+
+	gc08a3->sd.ctrl_handler = ctrl_hdlr;
+
+	return 0;
+
+error_ctrls:
+	v4l2_ctrl_handler_free(ctrl_hdlr);
+
+	return ret;
+}
+
+static int gc08a3_identify_module(struct gc08a3 *gc08a3)
+{
+	u64 val;
+	int ret;
+
+	ret = cci_read(gc08a3->regmap, GC08A3_REG_CHIP_ID, &val, NULL);
+	if (ret) {
+		dev_err(gc08a3->dev, "failed to read chip id");
+		return ret;
+	}
+
+	if (val != GC08A3_CHIP_ID) {
+		dev_err(gc08a3->dev, "chip id mismatch: 0x%x!=0x%llx",
+			GC08A3_CHIP_ID, val);
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static int gc08a3_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct gc08a3 *gc08a3;
+	int ret;
+
+	gc08a3 = devm_kzalloc(dev, sizeof(*gc08a3), GFP_KERNEL);
+	if (!gc08a3)
+		return -ENOMEM;
+
+	gc08a3->dev = dev;
+
+	ret = gc08a3_parse_fwnode(gc08a3);
+	if (ret)
+		return ret;
+
+	gc08a3->regmap = devm_cci_regmap_init_i2c(client, 16);
+	if (IS_ERR(gc08a3->regmap))
+		return dev_err_probe(dev, PTR_ERR(gc08a3->regmap),
+				     "failed to init CCI\n");
+
+	gc08a3->xclk = devm_clk_get(dev, NULL);
+	if (IS_ERR(gc08a3->xclk))
+		return dev_err_probe(dev, PTR_ERR(gc08a3->xclk),
+				     "failed to get xclk\n");
+
+	ret = clk_set_rate(gc08a3->xclk, GC08A3_DEFAULT_CLK_FREQ);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to set xclk frequency\n");
+
+	ret = gc08a3_get_regulators(dev, gc08a3);
+	if (ret < 0)
+		return dev_err_probe(dev, ret,
+				     "failed to get regulators\n");
+
+	gc08a3->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(gc08a3->reset_gpio))
+		return dev_err_probe(dev, PTR_ERR(gc08a3->reset_gpio),
+				     "failed to get gpio\n");
+
+	v4l2_i2c_subdev_init(&gc08a3->sd, client, &gc08a3_subdev_ops);
+	gc08a3->sd.internal_ops = &gc08a3_internal_ops;
+	gc08a3->cur_mode = &gc08a3_modes[0];
+
+	ret = gc08a3_power_on(gc08a3->dev);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "failed to sensor power on\n");
+
+	ret = gc08a3_identify_module(gc08a3);
+	if (ret) {
+		dev_err(&client->dev, "failed to find sensor: %d\n", ret);
+		goto err_power_off;
+	}
+
+	ret = gc08a3_init_controls(gc08a3);
+	if (ret) {
+		dev_err(&client->dev, "failed to init controls: %d", ret);
+		goto err_power_off;
+	}
+
+	gc08a3->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
+			    V4L2_SUBDEV_FL_HAS_EVENTS;
+	gc08a3->pad.flags = MEDIA_PAD_FL_SOURCE;
+	gc08a3->sd.dev = &client->dev;
+	gc08a3->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
+
+	ret = media_entity_pads_init(&gc08a3->sd.entity, 1, &gc08a3->pad);
+	if (ret < 0) {
+		dev_err(dev, "could not register media entity\n");
+		goto err_v4l2_ctrl_handler_free;
+	}
+
+	gc08a3->sd.state_lock = gc08a3->ctrls.lock;
+	ret = v4l2_subdev_init_finalize(&gc08a3->sd);
+	if (ret < 0) {
+		dev_err(dev, "v4l2 subdev init error: %d\n", ret);
+		goto err_media_entity_cleanup;
+	}
+
+	pm_runtime_set_active(gc08a3->dev);
+	pm_runtime_enable(gc08a3->dev);
+	pm_runtime_set_autosuspend_delay(gc08a3->dev, 1000);
+	pm_runtime_use_autosuspend(gc08a3->dev);
+	pm_runtime_idle(gc08a3->dev);
+
+	ret = v4l2_async_register_subdev_sensor(&gc08a3->sd);
+	if (ret < 0) {
+		dev_err(dev, "could not register v4l2 device\n");
+		goto err_rpm;
+	}
+
+	return 0;
+
+err_rpm:
+	pm_runtime_disable(gc08a3->dev);
+	v4l2_subdev_cleanup(&gc08a3->sd);
+
+err_media_entity_cleanup:
+	media_entity_cleanup(&gc08a3->sd.entity);
+
+err_v4l2_ctrl_handler_free:
+	v4l2_ctrl_handler_free(gc08a3->sd.ctrl_handler);
+
+err_power_off:
+	gc08a3_power_off(gc08a3->dev);
+
+	return ret;
+}
+
+static void gc08a3_remove(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct gc08a3 *gc08a3 = to_gc08a3(sd);
+
+	v4l2_async_unregister_subdev(&gc08a3->sd);
+	v4l2_subdev_cleanup(sd);
+	media_entity_cleanup(&gc08a3->sd.entity);
+	v4l2_ctrl_handler_free(&gc08a3->ctrls);
+
+	pm_runtime_disable(&client->dev);
+	if (!pm_runtime_status_suspended(&client->dev))
+		gc08a3_power_off(gc08a3->dev);
+	pm_runtime_set_suspended(&client->dev);
+}
+
+static const struct of_device_id gc08a3_of_match[] = {
+	{ .compatible = "galaxycore,gc08a3" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, gc08a3_of_match);
+
+static const struct dev_pm_ops gc08a3_pm_ops = {
+	SET_RUNTIME_PM_OPS(gc08a3_power_off, gc08a3_power_on, NULL)
+};
+
+static struct i2c_driver gc08a3_i2c_driver = {
+	.driver = {
+		.of_match_table = gc08a3_of_match,
+		.pm = &gc08a3_pm_ops,
+		.name  = "gc08a3",
+	},
+	.probe  = gc08a3_probe,
+	.remove = gc08a3_remove,
+};
+
+module_i2c_driver(gc08a3_i2c_driver);
+
+MODULE_DESCRIPTION("GalaxyCore gc08a3 Camera driver");
+MODULE_AUTHOR("Zhi Mao <zhi.mao at mediatek.com>");
+MODULE_LICENSE("GPL");
-- 
2.25.1




More information about the Linux-mediatek mailing list