[PATCH v2 2/2] arm64: dts: mediatek: add Kontron 3.5"-SBC-i1200

[Michael Walle]

On Mon Feb 19, 2024 at 2:35 PM CET, AngeloGioacchino Del Regno wrote:
> >> vbus is always supplied by something, as otherwise USB won't work - whether this
> >> is an always-on regulator or a passthrough from external supply this doesn't really
> >> matter - you should model a regulator-fixed that provides the 5V VBUS line.
> > 
> > I don't think this is correct, though. Think of an on-board USB
> > hub. There only D+/D- are connected (and maybe the USB3.2 SerDes
> > lanes). Or have a look at the M.2 pinout. There is no Vbus.
> > 
>
> Yes but the MediaTek MTU3 and/or controllers do have it ;-)

.. and ..

> >> For example:
> >> 	vbus_fixed: regulator-vbus {
> >> 		compatible = "regulator-fixed";
> >> 		regulator-name = "usb-vbus";
> >> 		regulator-always-on;
> >> 		regulator-boot-on;
> >> 		regulator-min-microvolt = <5000000>;
> >> 		regulator-max-microvolt = <5000000>;
> >> 	};
> > 
> > As mentioned above, I don't think this will make sense in my case.
> >  >> P.S.: If the rail has a different name, please use that different name. Obviously
> >> that requires you to have schematics at hand, and I don't know if you do: if you
> >> don't, then that regulator-vbus name is just fine.
> > 
> > I do have the schematics.
>
> In that case, you should model the power tree with the fixed power lines,
> check mt8195-cherry (and/or cherry-tomato) and radxa-nio-12l; even though
> those are technically "doing nothing", this is device tree, so it should
> provide a description of the hardware ... and the board does have fixed
> power lines.
> It has at least one: DC-IN (typec, barrel jack or whatever, the board needs
> power, doesn't it?!).

Mh, maybe I don't get it. But within the hardware there is simply no
Vbus. Thus I'd argue it doesn't make sense to have a vbus-supply
property. Besides, the mediatek,mtu3.yaml binding lists it as
deprecated anyway and it should rather be on the connector. There,
it makes perfectly sense (at least if it's a USB connector).

Thus in my case, the xhci for the front port has a vbus-supply
property (but it should rather have a connector node, as I've just
learned). But the internal port which connects to the USB hub
shouldn't have one.


  +-----+           +-----+                  +------+
  |     |<--Dp/Dn-->|     |<------Dp/Dn----->| USB  |
  | SoC |           |     |                  | Conn |
  |     |           |     |   +-----+        |      |
  +-----+           | USB |   | PWR |--Vbus->|      |
                    | Hub |   | SW  |        +------+
                    |     |   +-----+
                    |     |     ^
                    |     |     | PRTPWR
                    |     |-----'
                    +-----+

"PWR SW" is a power switch, the input (+5V) isn't shown here. The
power will be enabled by the USB Hub.

-michael
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 252 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-mediatek/attachments/20240219/9e6e2260/attachment.sig>