[PATCH net-next v3 4/7] net: dsa: mt7530: move XTAL check to mt7530_setup()

[Daniel Golle]

On Fri, Feb 02, 2024 at 09:16:02PM +0300, Arınç ÜNAL wrote:
> On 2.02.2024 14:48, Russell King (Oracle) wrote:
> > On Fri, Feb 02, 2024 at 12:19:10PM +0300, Arınç ÜNAL via B4 Relay wrote:
> > > From: Arınç ÜNAL <arinc.unal at arinc9.com>
> > > 
> > > The crystal frequency concerns the switch core. The frequency should be
> > > checked when the switch is being set up so the driver can reject the
> > > unsupported hardware earlier and without requiring port 6 to be used.
> > > 
> > > Move it to mt7530_setup(). Drop the unnecessary function printing.
> > > 
> > > Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
> > > Reviewed-by: Andrew Lunn <andrew at lunn.ch>
> > > Reviewed-by: Vladimir Oltean <olteanv at gmail.com>
> > 
> > I would prefer this to be earlier in the series, before patch 2 which
> > moves mt7530_setup_port6() to be called from mac_config(). mac_config()
> > is supposed to be configuration error-free - in other words, all state
> > should have been checked before hand.
> 
> I agree but mt7530_mac_config() is not a void function yet. The
> mac_port_config member of the mt753x_info structure points to this
> function. My next patch series gets rid of all useless error returns on the
> phylink path and change mac_port_config to void. So I don't think working
> on this patch series further will worth the effort. I'd rather have this
> version applied as is.

I agree regarding not changing the patch itself, but I also agree
with Russell regarding the patch ordering. I know it's a 10-minute
git headache to rebase the patches on top of each other in a different
order, but you can easily compare the end result being identical to
what you had before and hence don't need to retest.