[PATCH v7 00/10] drm: add DRM HDMI Codec framework

Fri Dec 20 07:00:47 PST 2024

On Fri, 20 Dec 2024 at 00:45, Dmitry Baryshkov
<dmitry.baryshkov at linaro.org> wrote:
>
> On Thu, Dec 19, 2024 at 04:16:37PM +0000, Dave Stevenson wrote:
> > On Wed, 18 Dec 2024 at 14:52, Dave Stevenson
> > <dave.stevenson at raspberrypi.com> wrote:
> > >
> > > Hi Maxime & Dmitry
> > >
> > > On Wed, 18 Dec 2024 at 07:59, Maxime Ripard <mripard at kernel.org> wrote:
> > > >
> > > > On Wed, Dec 18, 2024 at 07:24:23AM +0200, Dmitry Baryshkov wrote:
> > > > > On Tue, 17 Dec 2024 at 19:21, Maxime Ripard <mripard at kernel.org> wrote:
> > > > > > On Tue, Dec 17, 2024 at 02:40:22AM +0200, Dmitry Baryshkov wrote:
> > > > > > > While porting lt9611 DSI-to-HDMI bridge driver to use HDMI Connector
> > > > > > > framework, I stumbled upon an issue while handling the Audio InfoFrames.
> > > > > > > The HDMI codec callbacks weren't receiving the drm_atomic_state, so
> > > > > > > there was no simple way to get the drm_connector that stayed at the end
> > > > > > > of the bridge chain. At the same point the drm_hdmi_connector functions
> > > > > > > expected to get drm_connector instance.
> > > > > > >
> > > > > > > While looking for a way to solve the issue, I stumbled upon several
> > > > > > > deficiencies in existing hdmi_codec_ops implementations. Only few of the
> > > > > > > implementations were able to handle codec's 'plugged' callback. One
> > > > > > > third of the drivers didn't implement the get_eld() callback.
> > > > > > >
> > > > > > > Most of the issues can be solved if drm_connector handles
> > > > > > > hdmi-audio-codec on its own, delegating functionality to the actual
> > > > > > > implementation, be it a driver that implements drm_connector or
> > > > > > > drm_bridge.
> > > > > > >
> > > > > > > Implement such high-level framework, adding proper support for Audio
> > > > > > > InfoFrame generation to the LT9611 driver.
> > > > > > >
> > > > > > > Several design decisions to be kept in mind:
> > > > > > >
> > > > > > > - drm_connector_hdmi_codec is kept as simple as possible. It implements
> > > > > > >   generic functionality (ELD, hotplug, registration).
> > > > > > >
> > > > > > > - drm_hdmi_connector sets up HDMI codec device if the connector
> > > > > > >   is setup correspondingly (either I2S or S/PDIF is marked as
> > > > > > >   supported).
> > > > > > >
> > > > > > > - drm_bridge_connector provides a way to link HDMI audio codec
> > > > > > >   funcionality in the drm_bridge with the drm_connector_hdmi_codec
> > > > > > >   framework.
> > > > > > >
> > > > > > > - It might be worth reverting the no_i2s_capture / no_spdif_capture
> > > > > > >   bits. Only TDA889x driver sets them, while it's safe to assume that
> > > > > > >   most of HDMI / DP devices do not support ARC / capture. I think the
> > > > > > >   drivers should opt-in capture support rather than having to opt-out of
> > > > > > >   it.
> > > > > >
> > > > > > Sorry if this isn't clear to me and I'm quite late to the party, but did
> > > > > > you test this on vc4 with both a pi3 and pi4, or was it just compile
> > > > > > tested?
> > > > >
> > > > > LT9611 is actually tested, VC4 is only compile-tested. Should I put an RFT tag?
> > > >
> > > > Yeah, we definitely need to test it on the pi3 (polling-based) and the
> > > > pi4 (irq-based) at least.
> > > >
> > > > Dave, Maira, could you give it a try?
> > >
> > > I'm on it.
> >
> > Basic checks look OK.
> > Pi3 and Pi4 tested, including 4k60 on Pi4 (enables scrambling). Audio
> > works, and all the EDID parsing seems to be correct.
> >
> > Ideally I would like to do a couple more tests though as I had a
> > couple of spontaneous reboots on Pi4 whilst hotplugging.
> > Most likely it was just grounding issues, as I can't think of an
> > obvious way for the kernel to be triggering an automatic reboot. They
> > seemed to go away when I had enabled drm.debug=0x14, but more likely
> > I'd connected the serial port and therefore provided another ground.
> > Please don't hold the patches waiting on me though - I don't know when
> > I'll have time to do them.
>
> Tested-by?

I'd held off hoping to get the extra testing done today, but that
hasn't happened, and today is my last day before the Christmas break.
So based on what I've done so far:

Tested-by: Dave Stevenson <dave.stevenson at raspberrypi.com>

> >
> >
> > Also unrelated to this patch set, I have noted I'm getting
> > [   60.780897] WARNING: CPU: 3 PID: 501 at
> > drivers/gpu/drm/vc4/vc4_hvs.c:743 __vc4_hvs_stop_channel+0x148/0x164
> > [vc4]
> > ...
> > [   60.781192]  __vc4_hvs_stop_channel+0x148/0x164 [vc4] (P)
> > [   60.781212]  __vc4_hvs_stop_channel+0x40/0x164 [vc4] (L)
> > [   60.781230]  vc4_hvs_stop_channel+0x30/0x3c [vc4]
> > [   60.781248]  vc4_crtc_disable+0x140/0x1e8 [vc4]
> > [   60.781266]  vc4_crtc_atomic_disable+0x98/0xb8 [vc4]
> > [   60.781284]  disable_outputs+0x22c/0x33c [drm_kms_helper]
> > [   60.781326]  drm_atomic_helper_commit_modeset_disables+0x1c/0x4c
> > [drm_kms_helper]
> > [   60.781347]  vc4_atomic_commit_tail+0x10c/0x8e4 [vc4]
> > [   60.781364]  commit_tail+0xa0/0x188 [drm_kms_helper]
> > [   60.781385]  drm_atomic_helper_commit+0x16c/0x180 [drm_kms_helper]
> > [   60.781406]  drm_atomic_commit+0x88/0xc4 [drm]
> > [   60.781500]  drm_client_modeset_commit_atomic+0x204/0x264 [drm]
> > [   60.781553]  drm_client_modeset_commit_locked+0x5c/0x198 [drm]
> > [   60.781603]  drm_client_modeset_commit+0x30/0x58 [drm]
> > [   60.781652]  __drm_fb_helper_restore_fbdev_mode_unlocked+0xb4/0xe8
> > [drm_kms_helper]
> > [   60.781674]  drm_fb_helper_hotplug_event+0x108/0x12c [drm_kms_helper]
> > [   60.781695]  drm_fbdev_client_hotplug+0x28/0xd4 [drm_client_lib]
> > [   60.781700]  drm_client_dev_hotplug+0xc8/0x12c [drm]
> > [   60.781750]  drm_connector_helper_hpd_irq_event+0x70/0xb0 [drm_kms_helper]
> > [   60.781771]  vc4_hdmi_hpd_irq_thread+0x2c/0x3c [vc4]
> > [   60.781790]  irq_thread_fn+0x2c/0xa8
> > [   60.781799]  irq_thread+0x16c/0x2f4
> > [   60.781805]  kthread+0x118/0x11c
> > [   60.781813]  ret_from_fork+0x10/0x20
> > On first plugging or unplugging a second monitor. I suspect that is
> > spurious though and I'll look into it, but probably not this side of
> > the Christmas break.
> >
> >   Dave
>
> --
> With best wishes
> Dmitry