[PATCH v3 00/22] continue mt7988 devicetree work

[AngeloGioacchino Del Regno]

Il 17/12/24 10:12, Frank Wunderlich ha scritto:
> From: Frank Wunderlich <frank-w at public-files.de>
> 
> This series adds some missing labels and new nodes to mt7988 DTS.
> 
> based on pinctrl-series
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=918572
> 

The whole series is

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Good job!

Cheers,
Angelo

> changes:
> v3:
> - reorder
> - small fixes
> - add some new patches (t-phy, pcie, mmc overlays)
> - dropped pmic and proc-supply for now because we found a mismatch compared with schematic
> 
> v2:
> - reorder and squash label-commits to where they are used
> - add some more nodes
> - add changes to bananapi-r4 board
> - moving some nodes from SoC dtsi to board dts
> 
> Frank Wunderlich (22):
>    arm64: dts: mediatek: mt7988: Add reserved memory
>    arm64: dts: mediatek: mt7988: Add mmc support
>    arm64: dts: mediatek: mt7988: Add lvts node
>    arm64: dts: mediatek: mt7988: Add thermal-zone
>    arm64: dts: mediatek: mt7988: Add missing clock-div property for i2c
>    arm64: dts: mediatek: mt7988: Add mcu-sys node for cpu
>    arm64: dts: mediatek: mt7988: Add CPU OPP table for clock scaling
>    arm64: dts: mediatek: mt7988: Disable usb controllers by default
>    arm64: dts: mediatek: mt7988: Add t-phy for ssusb1
>    arm64: dts: mediatek: mt7988: Add pcie nodes
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable watchdog
>    arm64: dts: mediatek: mt7988a-bpi-r4: Add fixed regulators for 1v8 and
>      3v3
>    arm64: dts: mediatek: mt7988a-bpi-r4: Add dt overlays for sd + emmc
>    arm64: dts: mediatek: mt7988a-bpi-r4: Add thermal configuration
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable serial0 debug uart
>    arm64: dts: mediatek: mt7988a-bpi-r4: Add default UART stdout
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable I2C controllers
>    arm64: dts: mediatek: mt7988a-bpi-r4: Add PCA9545 I2C Mux
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable t-phy for ssusb1
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable ssusb1 on bpi-r4
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable pwm
>    arm64: dts: mediatek: mt7988a-bpi-r4: Enable pcie
> 
>   arch/arm64/boot/dts/mediatek/Makefile         |   3 +
>   .../mt7988a-bananapi-bpi-r4-emmc.dtso         |  33 ++
>   .../mediatek/mt7988a-bananapi-bpi-r4-sd.dtso  |  31 ++
>   .../dts/mediatek/mt7988a-bananapi-bpi-r4.dts  | 143 +++++++++
>   arch/arm64/boot/dts/mediatek/mt7988a.dtsi     | 303 +++++++++++++++++-
>   5 files changed, 506 insertions(+), 7 deletions(-)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-emmc.dtso
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-sd.dtso
>