[PATCH v3 09/22] arm64: dts: mediatek: mt7988: Add t-phy for ssusb1

[Frank Wunderlich]

From: Frank Wunderlich <frank-w at public-files.de>

USB controller needs phys for working properly.
On mt7988 ssusb0 uses a xs-phy, ssusb uses t-phy.
For now add the t-phy for ssusb1. We can reuse the mt7986 compatible
here.

Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
---
 arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 25 +++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index f8b01f3fff32..209d170bce7f 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -349,6 +349,8 @@ usb at 11200000 {
 				 <&infracfg CLK_INFRA_133M_USB_HCK_CK_P1>,
 				 <&infracfg CLK_INFRA_USB_XHCI_CK_P1>;
 			clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+			phys = <&tphyu2port0 PHY_TYPE_USB2>,
+			       <&tphyu3port0 PHY_TYPE_USB3>;
 			status = "disabled";
 		};
 
@@ -371,6 +373,29 @@ mmc0: mmc at 11230000 {
 			status = "disabled";
 		};
 
+		t-phy at 11c50000 {
+			compatible = "mediatek,mt7986-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			tphyu2port0: usb-phy at 11c50000 {
+				reg = <0 0x11c50000 0 0x700>;
+				clocks = <&infracfg CLK_INFRA_USB_UTMI_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+
+			tphyu3port0: usb-phy at 11c50700 {
+				reg = <0 0x11c50700 0 0x900>;
+				clocks = <&infracfg CLK_INFRA_USB_PIPE_CK_P1>;
+				clock-names = "ref";
+				#phy-cells = <1>;
+			};
+		};
+
 		clock-controller at 11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
-- 
2.43.0