[PATCH] arm64: dts: mediatek: mt8186: Move wakeup to MTU3 to get working suspend

[AngeloGioacchino Del Regno]

On Wed, 06 Nov 2024 16:01:45 -0500, Nícolas F. R. A. Prado wrote:
> The current DT has the wakeup-source and mediatek,syscon-wakeup
> properties in the XHCI nodes, which configures USB wakeup after powering
> down the XHCI hardware block. However, since the XHCI controller is
> behind an MTU3 (USB3 DRD controller), the MTU3 only gets powered down
> after USB wakeup has been configured, causing the system to detect a
> wakeup, and results in broken suspend support as the system resumes
> immediately.
> 
> [...]

Applied to v6.13-next/dts64, thanks!

[1/1] arm64: dts: mediatek: mt8186: Move wakeup to MTU3 to get working suspend
      commit: 253b4e96f5783fddede1b82274a7b4e0aa57d761

Cheers,
Angelo