[PATCH net-next 2/3] net: pcs: pcs-mtk-lynxi: implement pcs_inband_caps() method

[Russell King (Oracle)]

On Sun, Dec 08, 2024 at 03:01:38AM +0000, Daniel Golle wrote:
> On Thu, Dec 05, 2024 at 09:42:29AM +0000, Russell King (Oracle) wrote:
> > Report the PCS in-band capabilities to phylink for the LynxI PCS.
> > 
> > Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
> > ---
> >  drivers/net/pcs/pcs-mtk-lynxi.c | 16 ++++++++++++++++
> >  1 file changed, 16 insertions(+)
> > 
> > diff --git a/drivers/net/pcs/pcs-mtk-lynxi.c b/drivers/net/pcs/pcs-mtk-lynxi.c
> > index 4f63abe638c4..7de804535229 100644
> > --- a/drivers/net/pcs/pcs-mtk-lynxi.c
> > +++ b/drivers/net/pcs/pcs-mtk-lynxi.c
> > @@ -88,6 +88,21 @@ static struct mtk_pcs_lynxi *pcs_to_mtk_pcs_lynxi(struct phylink_pcs *pcs)
> >  	return container_of(pcs, struct mtk_pcs_lynxi, pcs);
> >  }
> >  
> > +static unsigned int mtk_pcs_lynxi_inband_caps(struct phylink_pcs *pcs,
> > +					      phy_interface_t interface)
> > +{
> > +	switch (interface) {
> > +	case PHY_INTERFACE_MODE_1000BASEX:
> > +	case PHY_INTERFACE_MODE_2500BASEX:
> > +	case PHY_INTERFACE_MODE_SGMII:
> > +	case PHY_INTERFACE_MODE_QSGMII:
> 
> QSGMII is not supported by this PCS.

Well...
- lynx_pcs_get_state(), lynx_pcs_config(), and lynx_pcs_link_up()
  include QSGMII in their case statements.
- lynx_pcs_config_giga() refers to QSGMII in a comment, grouping it
  with SGMII configuration.

I think if the hardware doesn't support QSGMII, these references to it
should be removed?

I also think that adding a .pcs_validate() method would be a good idea
to reject interface modes that the PCS does not support.

> Apart from that looks good to me.
> 
> Reviewed-by: Daniel Golle <daniel at makrotopia.org>

Thanks.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!