[RESEND PATCH v2 2/2] arm64: dts: mediatek: mt8183-pumpkin: add HDMI support

[Nícolas F. R. A. Prado]

On Mon, Aug 19, 2024 at 08:05:56PM +0800, Pin-yen Lin wrote:
> From: Fabien Parent <fparent at baylibre.com>
> 
> The MT8183 Pumpkin board has a micro-HDMI connector. HDMI support is
> provided by an IT66121 DPI <-> HDMI bridge.
> 
> This commit enables DPI and add the node for the IT66121 bridge.

Make it imperative [1]:

Enable the DPI and add the node for the IT66121 bridge.

[1] https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes

> 
> Signed-off-by: Fabien Parent <fparent at baylibre.com>

You should also add a Co-developed-by tag for yourself since you made (or will
make) changes to this commit.

> Signed-off-by: Pin-yen Lin <treapking at chromium.org>
> 
> ---
> 
> (no changes since v1)
> 
>  .../boot/dts/mediatek/mt8183-pumpkin.dts      | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
> index 1aa668c3ccf9..ecc237355b56 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
[..]
> @@ -120,6 +132,41 @@ &i2c6 {
>  	pinctrl-0 = <&i2c6_pins>;
>  	status = "okay";
>  	clock-frequency = <100000>;
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	it66121hdmitx: hdmitx at 4c {
> +		compatible = "ite,it66121";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ite_pins>;
> +		vcn33-supply = <&mt6358_vcn33_wifi_reg>;

As pointed out by lkp this label doesn't exist:
https://lore.kernel.org/all/202408200703.MYO1s3Ne-lkp@intel.com/

See 9a8014b1d4d2 ("arm64: dts: mediatek: mt6358: Merge ldo_vcn33_* regulators").

> +		vcn18-supply = <&mt6358_vcn18_reg>;
> +		vrf12-supply = <&mt6358_vrf12_reg>;
> +		reset-gpios = <&pio 160 GPIO_ACTIVE_LOW>;
> +		interrupt-parent = <&pio>;
> +		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
> +		reg = <0x4c>;

Please take a look at https://docs.kernel.org/devicetree/bindings/dts-coding-style.html
for among other things, suggested ordering of properties in nodes. reg is
commonly the second property.

> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port at 0 {
> +				reg = <0>;

Add a blank line here.

> +				it66121_in: endpoint {
> +					bus-width = <12>;
> +					remote-endpoint = <&dpi_out>;
> +				};
> +			};
> +
> +			port at 1 {
> +				reg = <1>;

Ditto.

Reviewed-by: Nícolas F. R. A. Prado <nfraprado at collabora.com>

Thanks,
Nícolas