[PATCH 08/11] phy: ti: am654-serdes: Use scoped device node handling to simplify error paths
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Mon Aug 26 03:07:24 PDT 2024
Obtain the device node reference with scoped/cleanup.h to reduce error
handling and make the code a bit simpler.
Unlike in other typical of_node_get+syscon_node_to_regmap cases, the
reference cannot be dropped immediately after syscon_node_to_regmap(),
because further part of probe() uses it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
drivers/phy/ti/phy-am654-serdes.c | 50 +++++++++++++--------------------------
1 file changed, 17 insertions(+), 33 deletions(-)
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 673449607c02..3bf3aff4b1c7 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -7,6 +7,7 @@
*/
#include <dt-bindings/phy/phy.h>
+#include <linux/cleanup.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
@@ -644,7 +645,6 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
struct device_node *node = am654_phy->of_node;
struct device *dev = am654_phy->dev;
struct serdes_am654_clk_mux *mux;
- struct device_node *regmap_node;
const char **parent_names;
struct clk_init_data *init;
unsigned int num_parents;
@@ -652,7 +652,6 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
const __be32 *addr;
unsigned int reg;
struct clk *clk;
- int ret = 0;
mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
if (!mux)
@@ -660,41 +659,30 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
init = &mux->clk_data;
- regmap_node = of_parse_phandle(node, "ti,serdes-clk", 0);
- if (!regmap_node) {
- dev_err(dev, "Fail to get serdes-clk node\n");
- ret = -ENODEV;
- goto out_put_node;
- }
+ struct device_node *regmap_node __free(device_node) =
+ of_parse_phandle(node, "ti,serdes-clk", 0);
+ if (!regmap_node)
+ return dev_err_probe(dev, -ENODEV, "Fail to get serdes-clk node\n");
regmap = syscon_node_to_regmap(regmap_node->parent);
- if (IS_ERR(regmap)) {
- dev_err(dev, "Fail to get Syscon regmap\n");
- ret = PTR_ERR(regmap);
- goto out_put_node;
- }
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Fail to get Syscon regmap\n");
num_parents = of_clk_get_parent_count(node);
- if (num_parents < 2) {
- dev_err(dev, "SERDES clock must have parents\n");
- ret = -EINVAL;
- goto out_put_node;
- }
+ if (num_parents < 2)
+ return dev_err_probe(dev, -EINVAL, "SERDES clock must have parents\n");
parent_names = devm_kzalloc(dev, (sizeof(char *) * num_parents),
GFP_KERNEL);
- if (!parent_names) {
- ret = -ENOMEM;
- goto out_put_node;
- }
+ if (!parent_names)
+ return -ENOMEM;
of_clk_parent_fill(node, parent_names, num_parents);
addr = of_get_address(regmap_node, 0, NULL, NULL);
- if (!addr) {
- ret = -EINVAL;
- goto out_put_node;
- }
+ if (!addr)
+ return -EINVAL;
reg = be32_to_cpu(*addr);
@@ -710,16 +698,12 @@ static int serdes_am654_clk_register(struct serdes_am654 *am654_phy,
mux->hw.init = init;
clk = devm_clk_register(dev, &mux->hw);
- if (IS_ERR(clk)) {
- ret = PTR_ERR(clk);
- goto out_put_node;
- }
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
am654_phy->clks[clock_num] = clk;
-out_put_node:
- of_node_put(regmap_node);
- return ret;
+ return 0;
}
static const struct of_device_id serdes_am654_id_table[] = {
--
2.43.0
More information about the Linux-mediatek
mailing list