[PATCH v4 0/7] media: mediatek: vcodec: fix v4l2_ctrl_request_complete fail

[Sebastian Fricke]

Hey Yunfei,

given this new series by Hans:
https://patchwork.linuxtv.org/project/linux-media/list/?series=13427

we might actually be able to find a more performant solution of the
problem, I'll work on that a bit and give you feedback.

Regards,
Sebastian

On 07.08.2024 16:24, Yunfei Dong wrote:
>v4l2_m2m_buf_done is called in lat work queue, v4l2_ctrl_request_complete
>is called in core queue. The request status of output queue will be set to
>MEDIA_REQUEST_STATE_COMPLETE when v4l2_m2m_buf_done is called, leading to
>output queue request complete fail. Must move v4l2_ctrl_request_complete
>in front of v4l2_m2m_buf_done.
>
>Patch 1 setting request complete before buffer done
>Patch 2 change flush decode order when stream off
>Patch 3 flush decoder before stream off
>Patch 4 using input information to get vb2 buffer
>Patch 5 store source vb2 buffer
>Patch 6 replace v4l2_m2m_next_src_buf with v4l2_m2m_src_buf_remove
>Patch 7 remove media request checking
>
>---
>compared with v3:
>- fix flush decoder issue when userspace stream off capture queue firstly
>- fluster test result same with v3
>
>compared with v2:
>- add patch 5/6/7 to fix decode again issue
>- add fluster test result with mt8195 platform(same with no changed):
>  1> ./fluster.py run -d GStreamer-VP8-V4L2SL-Gst1.0 -j1 -t 90
>     VP8-TEST-VECTORS 59/61
>  2> ./fluster.py run -d GStreamer-VP9-V4L2SL-Gst1.0 -j1 -t 90
>     VP9-TEST-VECTORS 276/305
>  3> ./fluster.py run -d GStreamer-AV1-V4L2SL-Gst1.0 -j1 -t 90
>     AV1-TEST-VECTORS 237/239
>  4> ./fluster.py run -d GStreamer-H.264-V4L2SL-Gst1.0 -j1 -t 90
>     JVT-AVC_V1       95/135
>  5> ./fluster.py run -d GStreamer-H.265-V4L2SL-Gst1.0 -j1 -t 90
>     JCT-VC-HEVC_V1   142/147
>
>compared with v1:
>- add patch 2/3/4 to fix timing issue.
>---
>Yunfei Dong (7):
>  media: mediatek: vcodec: setting request complete before buffer done
>  media: mediatek: vcodec: change flush decode order when stream off
>  media: mediatek: vcodec: flush decoder before stream off
>  media: mediatek: vcodec: using input information to get vb2 buffer
>  media: mediatek: vcodec: store source vb2 buffer
>  media: mediatek: vcodec: replace v4l2_m2m_next_src_buf with
>    v4l2_m2m_src_buf_remove
>  media: mediatek: vcodec: remove media request checking
>
> .../mediatek/vcodec/decoder/mtk_vcodec_dec.c  | 44 ++++++++---------
> .../vcodec/decoder/mtk_vcodec_dec_drv.h       |  4 +-
> .../vcodec/decoder/mtk_vcodec_dec_stateless.c | 48 ++++++++++++++-----
> .../vcodec/decoder/vdec/vdec_av1_req_lat_if.c | 18 +++----
> .../decoder/vdec/vdec_h264_req_multi_if.c     |  4 +-
> .../decoder/vdec/vdec_hevc_req_multi_if.c     |  4 +-
> .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c | 19 ++++----
> .../mediatek/vcodec/decoder/vdec_msg_queue.h  |  4 +-
> 8 files changed, 85 insertions(+), 60 deletions(-)
>
>-- 
>2.46.0
>
>