[PATCH 1/2] dt-bindings: pinctrl: airoha: Add EN7581 pinctrl controller

[Benjamin Larsson]

On 2024-08-12 08:48, Krzysztof Kozlowski wrote:
>> +      pio: pinctrl at 1fa20214 {
>> +        compatible = "airoha,en7581-pinctrl";
>> +        reg = <0x0 0x1fa20214 0x0 0x30>,
>> +              <0x0 0x1fa2027c 0x0 0x8>,
>> +              <0x0 0x1fbf0234 0x0 0x4>,
>> +              <0x0 0x1fbf0268 0x0 0x4>,
>> +              <0x0 0x1fa2001c 0x0 0x50>,
>> +              <0x0 0x1fa2018c 0x0 0x4>,
>> +              <0x0 0x1fbf0204 0x0 0x4>,
>> +              <0x0 0x1fbf0270 0x0 0x4>,
>> +              <0x0 0x1fbf0200 0x0 0x4>,
>> +              <0x0 0x1fbf0220 0x0 0x4>,
>> +              <0x0 0x1fbf0260 0x0 0x4>,
>> +              <0x0 0x1fbf0264 0x0 0x4>,
>> +              <0x0 0x1fbf0214 0x0 0x4>,
>> +              <0x0 0x1fbf0278 0x0 0x4>,
>> +              <0x0 0x1fbf0208 0x0 0x4>,
>> +              <0x0 0x1fbf027c 0x0 0x4>,
>> +              <0x0 0x1fbf0210 0x0 0x4>,
>> +              <0x0 0x1fbf028c 0x0 0x4>,
>> +              <0x0 0x1fbf0290 0x0 0x4>,
>> +              <0x0 0x1fbf0294 0x0 0x4>,
>> +              <0x0 0x1fbf020c 0x0 0x4>,
>> +              <0x0 0x1fbf0280 0x0 0x4>,
>> +              <0x0 0x1fbf0284 0x0 0x4>,
>> +              <0x0 0x1fbf0288 0x0 0x4>;
> Why are you mapping individual registers? At least half of these are
> continuous.

Hi, this is by design because of the register placement in the gpio 
block and the fact that the pwm functionality is intermixed in there 
also. As example the following registers are all GPIOCTRL:

<0x0 0x1fbf0200 0x0 0x4>,
<0x0 0x1fbf0220 0x0 0x4>,
<0x0 0x1fbf0260 0x0 0x4>,
<0x0 0x1fbf0264 0x0 0x4>,

To simplify the driver code logic the complexity is moved to the dts 
because of that.

MvH

Benjamin Larsson