[PATCH] dt-bindings: regulator: mediatek,mt6397-regulator: convert to YAML

[Macpaul Lin]

On 8/6/24 21:49, Rob Herring (Arm) wrote:
> 	
> 
> External email : Please do not click links or open attachments until you 
> have verified the sender or the content.
> 
> On Tue, 06 Aug 2024 20:25:07 +0800, Macpaul Lin wrote:
>> Convert the MediaTek MT6397 regulator bindings to DT schema.
>> 
>> Signed-off-by: Sen Chu <sen.chu at mediatek.com>
>> Signed-off-by: Macpaul Lin <macpaul.lin at mediatek.com>
>> ---
>>  .../regulator/mediatek,mt6397-regulator.yaml  | 275 ++++++++++++++++++
>>  .../bindings/regulator/mt6397-regulator.txt   | 220 --------------
>>  2 files changed, 275 insertions(+), 220 deletions(-)
>>  create mode 100644 Documentation/devicetree/bindings/regulator/mediatek,mt6397-regulator.yaml
>>  delete mode 100644 Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
>> 
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> Documentation/devicetree/bindings/regulator/mediatek,mt6397-regulator.example.dtb: /example-0/pwrap/pmic: failed to match any schema with compatible: ['mediatek,mt6397']

Thanks for the reminding.

I'm already using the latest dtschema (2024.05).
I've found the difference that I find this error because I'm always 
using the command to run dt_binding_check.
"make dt_binding_check DT_SCHEMA_FILES=mediatek,mt6397-regulator.yaml"

After I've replace the command to full dt_binding_check, I can find this 
error now with "make dt_binding_check".

Just report the difference of running checking tools.
I'll fix this error in the next patch. Thanks!

> doc reference errors (make refcheckdocs):
> 
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240806122507.2766-1-macpaul.lin@mediatek.com
> 
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
> 
> pip3 install dtschema --upgrade
> 
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
> 

Best regards,
Macpaul Lin