[PATCH v6 4/5] media: platform: mediatek: isp_30: add mediatek ISP3.0 camsv

[CK Hu (胡俊光)]

Hi, Laurent:

On Wed, 2024-07-31 at 11:29 +0300, Laurent Pinchart wrote:
>  	 
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>  Hi CK,
> 
> On Wed, Jul 31, 2024 at 02:59:51AM +0000, CK Hu (胡俊光) wrote:
> > On Mon, 2024-07-29 at 16:48 +0200, Julien Stephan wrote:
> > >  From: Phi-bang Nguyen <pnguyen at baylibre.com>
> > >
> > > This driver provides a path to bypass the SoC ISP so that image data
> > > coming from the SENINF can go directly into memory without any image
> > > processing. This allows the use of an external ISP.
> > >
> > > Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> > > Signed-off-by: Florian Sylvestre <fsylvestre at baylibre.com>
> > > [Paul Elder fix irq locking]
> > > Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
> > > Co-developed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> > > Co-developed-by: Julien Stephan <jstephan at baylibre.com>
> > > Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> > > ---
> > 
> > [snip]
> > 
> > > +
> > > +static void mtk_cam_cmos_vf_enable(struct mtk_cam_dev *cam_dev,
> > > +   bool enable, bool pak_en)
> > > +{
> > > +struct device *dev = cam_dev->dev;
> > > +
> > > +if (pm_runtime_get_sync(dev) < 0) {
> > > +dev_err(dev, "failed to get pm_runtime\n");
> > > +goto out;
> > > +}
> > > +
> > > +if (enable)
> > > +cam_dev->hw_functions->mtk_cam_cmos_vf_hw_enable(cam_dev);
> > 
> > Directly call mtk_camsv30_cmos_vf_hw_enable().
> 
> The goal, when this was developed, was to support multiple generations
> of hardware with a single driver. I think it's a worthwhile goal, but at
> the same time, I'm not sure that will ever happen as I'm not aware of
> plans to upstream Genio 350 and 500 support (which is a bad sad, as it's
> more or less working out-of-tree). I'm thus fine either way, and if we
> think the most likely outcome is that this driver will only support
> Genio 300, I'm fine dropping the abstraction layer.

I know this goal.
For the mtk_camsv_30_setup(), in new SoC, if only one line in this function is different,
should we duplicate the whole function and modify only one line?
I think we don't know what would happen in future,
so we should not design for something which we have no any information.

Regards,
CK

> 
> > > +else
> > > +cam_dev->hw_functions->mtk_cam_cmos_vf_hw_disable(cam_dev);
> > 
> > Directly call mtk_camsv30_cmos_vf_hw_disable().
> > 
> > > +
> > > +out:
> > > +pm_runtime_put_autosuspend(dev);
> > > +}
> > > +
> 
> -- 
> Regards,
> 
> Laurent Pinchart