[PATCH v2 net-next 2/2] net: dsa: mt7530: Add EN7581 support
Lorenzo Bianconi
lorenzo at kernel.org
Thu Aug 1 00:35:12 PDT 2024
Introduce support for the DSA built-in switch available on the EN7581
development board. EN7581 support is similar to MT7988 one except
it requires to set MT7530_FORCE_MODE bit in MT753X_PMCR_P register
for on cpu port.
Tested-by: Benjamin Larsson <benjamin.larsson at genexis.eu>
Signed-off-by: Lorenzo Bianconi <lorenzo at kernel.org>
---
drivers/net/dsa/mt7530-mmio.c | 1 +
drivers/net/dsa/mt7530.c | 49 ++++++++++++++++++++++++++++++-----
drivers/net/dsa/mt7530.h | 20 ++++++++++----
3 files changed, 59 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c
index b74a230a3f13..10dc49961f15 100644
--- a/drivers/net/dsa/mt7530-mmio.c
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -11,6 +11,7 @@
#include "mt7530.h"
static const struct of_device_id mt7988_of_match[] = {
+ { .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], },
{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
{ /* sentinel */ },
};
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index ec18e68bf3a8..d84ee1b419a6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1152,7 +1152,8 @@ mt753x_cpu_port_enable(struct dsa_switch *ds, int port)
* the MT7988 SoC. Trapped frames will be forwarded to the CPU port that
* is affine to the inbound user port.
*/
- if (priv->id == ID_MT7531 || priv->id == ID_MT7988)
+ if (priv->id == ID_MT7531 || priv->id == ID_MT7988 ||
+ priv->id == ID_EN7581)
mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port)));
/* CPU port gets connected to all user ports of
@@ -2207,7 +2208,7 @@ mt7530_setup_irq(struct mt7530_priv *priv)
return priv->irq ? : -EINVAL;
}
- if (priv->id == ID_MT7988)
+ if (priv->id == ID_MT7988 || priv->id == ID_EN7581)
priv->irq_domain = irq_domain_add_linear(np, MT7530_NUM_PHYS,
&mt7988_irq_domain_ops,
priv);
@@ -2438,8 +2439,10 @@ mt7530_setup(struct dsa_switch *ds)
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
- MT7530_FORCE_MODE, MT7530_FORCE_MODE);
+ mt7530_rmw(priv, MT753X_PMCR_P(i),
+ PMCR_LINK_SETTINGS_MASK |
+ MT753X_FORCE_MODE(priv->id),
+ MT753X_FORCE_MODE(priv->id));
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2550,8 +2553,10 @@ mt7531_setup_common(struct dsa_switch *ds)
/* Clear link settings and enable force mode to force link down
* on all ports until they're enabled later.
*/
- mt7530_rmw(priv, MT753X_PMCR_P(i), PMCR_LINK_SETTINGS_MASK |
- MT7531_FORCE_MODE_MASK, MT7531_FORCE_MODE_MASK);
+ mt7530_rmw(priv, MT753X_PMCR_P(i),
+ PMCR_LINK_SETTINGS_MASK |
+ MT753X_FORCE_MODE(priv->id),
+ MT753X_FORCE_MODE(priv->id));
/* Disable forwarding by default on all ports */
mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK,
@@ -2783,6 +2788,28 @@ static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port,
}
}
+static void en7581_mac_port_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 0 ... 4:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+
+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+ break;
+
+ /* Port 6 is connected to SoC's XGMII MAC. There is no MII pinout. */
+ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+
+ config->mac_capabilities |= MAC_10000FD;
+ break;
+ }
+}
+
static void
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
@@ -3220,6 +3247,16 @@ const struct mt753x_info mt753x_table[] = {
.phy_write_c45 = mt7531_ind_c45_phy_write,
.mac_port_get_caps = mt7988_mac_port_get_caps,
},
+ [ID_EN7581] = {
+ .id = ID_EN7581,
+ .pcs_ops = &mt7530_pcs_ops,
+ .sw_setup = mt7988_setup,
+ .phy_read_c22 = mt7531_ind_c22_phy_read,
+ .phy_write_c22 = mt7531_ind_c22_phy_write,
+ .phy_read_c45 = mt7531_ind_c45_phy_read,
+ .phy_write_c45 = mt7531_ind_c45_phy_write,
+ .mac_port_get_caps = en7581_mac_port_get_caps,
+ },
};
EXPORT_SYMBOL_GPL(mt753x_table);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index 28592123070b..6ad33a9f6b1d 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -19,6 +19,7 @@ enum mt753x_id {
ID_MT7621 = 1,
ID_MT7531 = 2,
ID_MT7988 = 3,
+ ID_EN7581 = 4,
};
#define NUM_TRGMII_CTRL 5
@@ -64,25 +65,30 @@ enum mt753x_id {
#define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x)
#define MT753X_MIRROR_REG(id) ((id == ID_MT7531 || \
- id == ID_MT7988) ? \
+ id == ID_MT7988 || \
+ id == ID_EN7581) ? \
MT7531_CFC : MT753X_MFC)
#define MT753X_MIRROR_EN(id) ((id == ID_MT7531 || \
- id == ID_MT7988) ? \
+ id == ID_MT7988 || \
+ id == ID_EN7581) ? \
MT7531_MIRROR_EN : MT7530_MIRROR_EN)
#define MT753X_MIRROR_PORT_MASK(id) ((id == ID_MT7531 || \
- id == ID_MT7988) ? \
+ id == ID_MT7988 || \
+ id == ID_EN7581) ? \
MT7531_MIRROR_PORT_MASK : \
MT7530_MIRROR_PORT_MASK)
#define MT753X_MIRROR_PORT_GET(id, val) ((id == ID_MT7531 || \
- id == ID_MT7988) ? \
+ id == ID_MT7988 || \
+ id == ID_EN7581) ? \
MT7531_MIRROR_PORT_GET(val) : \
MT7530_MIRROR_PORT_GET(val))
#define MT753X_MIRROR_PORT_SET(id, val) ((id == ID_MT7531 || \
- id == ID_MT7988) ? \
+ id == ID_MT7988 || \
+ id == ID_EN7581) ? \
MT7531_MIRROR_PORT_SET(val) : \
MT7530_MIRROR_PORT_SET(val))
@@ -355,6 +361,10 @@ enum mt7530_vlan_port_acc_frm {
MT7531_FORCE_MODE_TX_FC | \
MT7531_FORCE_MODE_EEE100 | \
MT7531_FORCE_MODE_EEE1G)
+#define MT753X_FORCE_MODE(id) ((id == ID_MT7531 || \
+ id == ID_MT7988) ? \
+ MT7531_FORCE_MODE_MASK : \
+ MT7530_FORCE_MODE)
#define PMCR_LINK_SETTINGS_MASK (PMCR_MAC_TX_EN | PMCR_MAC_RX_EN | \
PMCR_FORCE_EEE1G | \
PMCR_FORCE_EEE100 | \
--
2.45.2
More information about the Linux-mediatek
mailing list