[PATCH net-next] net: dsa: mt7530: do not set MT7530_P5_DIS when PHY muxing is being used

Arınç ÜNAL via B4 Relay devnull+arinc.unal.arinc9.com at kernel.org
Sat Apr 27 04:24:42 PDT 2024


From: Arınç ÜNAL <arinc.unal at arinc9.com>

When the PHY muxing feature is in use, port 5 won't be defined in the
device tree. Because of this, the type member of the dsa_port structure for
this port will be assigned DSA_PORT_TYPE_UNUSED. The dsa_port_setup()
function calls ds->ops->port_disable() when the port type is
DSA_PORT_TYPE_UNUSED.

The MT7530_P5_DIS bit is unset when PHY muxing is being used.
mt7530_port_disable() which is assigned to ds->ops->port_disable() is
called afterwards. Currently, mt7530_port_disable() sets MT7530_P5_DIS
which breaks network connectivity when PHY muxing is being used.

Therefore, do not set MT7530_P5_DIS when PHY muxing is being used.

Fixes: 377174c5760c ("net: dsa: mt7530: move MT753X_MTRAP operations for MT7530")
Reported-by: Daniel Golle <daniel at makrotopia.org>
Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
Hello.

I've sent this to net-next as the patch it fixes is on the current
development cycle.
---
 drivers/net/dsa/mt7530.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 2b9f904a98f0..07b6da3ae97c 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1220,7 +1220,7 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 	if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
 		return;
 
-	if (port == 5)
+	if (port == 5 && priv->p5_mode == GMAC5)
 		mt7530_set(priv, MT753X_MTRAP, MT7530_P5_DIS);
 	else if (port == 6)
 		mt7530_set(priv, MT753X_MTRAP, MT7530_P6_DIS);

---
base-commit: 5c4c0edca68a5841a8d53ccd49596fe199c8334c
change-id: 20240427-for-netnext-mt7530-do-not-disable-port5-when-phy-muxing-7ff5fd0995d7

Best regards,
-- 
Arınç ÜNAL <arinc.unal at arinc9.com>





More information about the Linux-mediatek mailing list