[PATCH v3 2/4] remoteproc: mediatek: Support MT8188 SCP core 1
Olivia Wen
olivia.wen at mediatek.com
Tue Apr 23 20:03:49 PDT 2024
MT8188 SCP has two RISC-V cores which is similar to MT8195 but without
L1TCM. We've added MT8188-specific functions to configure L1TCM in
multicore setups.
Signed-off-by: Olivia Wen <olivia.wen at mediatek.com>
---
drivers/remoteproc/mtk_scp.c | 146 ++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 143 insertions(+), 3 deletions(-)
diff --git a/drivers/remoteproc/mtk_scp.c b/drivers/remoteproc/mtk_scp.c
index 6751829..6295148 100644
--- a/drivers/remoteproc/mtk_scp.c
+++ b/drivers/remoteproc/mtk_scp.c
@@ -471,6 +471,86 @@ static int mt8186_scp_before_load(struct mtk_scp *scp)
return 0;
}
+static int mt8188_scp_l2tcm_on(struct mtk_scp *scp)
+{
+ struct mtk_scp_of_cluster *scp_cluster = scp->cluster;
+
+ mutex_lock(&scp_cluster->cluster_lock);
+
+ if (scp_cluster->l2tcm_refcnt == 0) {
+ /* clear SPM interrupt, SCP2SPM_IPC_CLR */
+ writel(0xff, scp->cluster->reg_base + MT8192_SCP2SPM_IPC_CLR);
+
+ /* Power on L2TCM */
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+ }
+
+ scp_cluster->l2tcm_refcnt += 1;
+
+ mutex_unlock(&scp_cluster->cluster_lock);
+
+ return 0;
+}
+
+static int mt8188_scp_before_load(struct mtk_scp *scp)
+{
+ writel(1, scp->cluster->reg_base + MT8192_CORE0_SW_RSTN_SET);
+
+ mt8188_scp_l2tcm_on(scp);
+
+ scp_sram_power_on(scp->cluster->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+ /* enable MPU for all memory regions */
+ writel(0xff, scp->cluster->reg_base + MT8192_CORE0_MEM_ATT_PREDEF);
+
+ return 0;
+}
+
+static int mt8188_scp_c1_before_load(struct mtk_scp *scp)
+{
+ u32 sec_ctrl;
+ struct mtk_scp *scp_c0;
+ struct mtk_scp_of_cluster *scp_cluster = scp->cluster;
+
+ scp->data->scp_reset_assert(scp);
+
+ mt8188_scp_l2tcm_on(scp);
+
+ scp_sram_power_on(scp->cluster->reg_base + MT8195_CPU1_SRAM_PD, 0);
+
+ /* enable MPU for all memory regions */
+ writel(0xff, scp->cluster->reg_base + MT8195_CORE1_MEM_ATT_PREDEF);
+
+ /*
+ * The L2TCM_OFFSET_RANGE and L2TCM_OFFSET shift the destination address
+ * on SRAM when SCP core 1 accesses SRAM.
+ *
+ * This configuration solves booting the SCP core 0 and core 1 from
+ * different SRAM address because core 0 and core 1 both boot from
+ * the head of SRAM by default. this must be configured before boot SCP core 1.
+ *
+ * The value of L2TCM_OFFSET_RANGE is from the viewpoint of SCP core 1.
+ * When SCP core 1 issues address within the range (L2TCM_OFFSET_RANGE),
+ * the address will be added with a fixed offset (L2TCM_OFFSET) on the bus.
+ * The shift action is tranparent to software.
+ */
+ writel(0, scp->cluster->reg_base + MT8195_L2TCM_OFFSET_RANGE_0_LOW);
+ writel(scp->sram_size, scp->cluster->reg_base + MT8195_L2TCM_OFFSET_RANGE_0_HIGH);
+
+ scp_c0 = list_first_entry(&scp_cluster->mtk_scp_list, struct mtk_scp, elem);
+ writel(scp->sram_phys - scp_c0->sram_phys, scp->cluster->reg_base + MT8195_L2TCM_OFFSET);
+
+ /* enable SRAM offset when fetching instruction and data */
+ sec_ctrl = readl(scp->cluster->reg_base + MT8195_SEC_CTRL);
+ sec_ctrl |= MT8195_CORE_OFFSET_ENABLE_I | MT8195_CORE_OFFSET_ENABLE_D;
+ writel(sec_ctrl, scp->cluster->reg_base + MT8195_SEC_CTRL);
+
+ return 0;
+}
+
static int mt8192_scp_before_load(struct mtk_scp *scp)
{
/* clear SPM interrupt, SCP2SPM_IPC_CLR */
@@ -717,6 +797,47 @@ static void mt8183_scp_stop(struct mtk_scp *scp)
writel(0, scp->cluster->reg_base + MT8183_WDT_CFG);
}
+static void mt8188_scp_l2tcm_off(struct mtk_scp *scp)
+{
+ struct mtk_scp_of_cluster *scp_cluster = scp->cluster;
+
+ mutex_lock(&scp_cluster->cluster_lock);
+
+ if (scp_cluster->l2tcm_refcnt > 0)
+ scp_cluster->l2tcm_refcnt -= 1;
+
+ if (scp_cluster->l2tcm_refcnt == 0) {
+ /* Power off L2TCM */
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_0, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_1, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L2TCM_SRAM_PD_2, 0);
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_L1TCM_SRAM_PDN, 0);
+ }
+
+ mutex_unlock(&scp_cluster->cluster_lock);
+}
+
+static void mt8188_scp_stop(struct mtk_scp *scp)
+{
+ mt8188_scp_l2tcm_off(scp);
+
+ scp_sram_power_off(scp->cluster->reg_base + MT8192_CPU0_SRAM_PD, 0);
+
+ /* Disable SCP watchdog */
+ writel(0, scp->cluster->reg_base + MT8192_CORE0_WDT_CFG);
+}
+
+static void mt8188_scp_c1_stop(struct mtk_scp *scp)
+{
+ mt8188_scp_l2tcm_off(scp);
+
+ /* Power off CPU SRAM */
+ scp_sram_power_off(scp->cluster->reg_base + MT8195_CPU1_SRAM_PD, 0);
+
+ /* Disable SCP watchdog */
+ writel(0, scp->cluster->reg_base + MT8195_CORE1_WDT_CFG);
+}
+
static void mt8192_scp_stop(struct mtk_scp *scp)
{
/* Disable SRAM clock */
@@ -1264,16 +1385,28 @@ static const struct mtk_scp_of_data mt8186_of_data = {
static const struct mtk_scp_of_data mt8188_of_data = {
.scp_clk_get = mt8195_scp_clk_get,
- .scp_before_load = mt8192_scp_before_load,
- .scp_irq_handler = mt8192_scp_irq_handler,
+ .scp_before_load = mt8188_scp_before_load,
+ .scp_irq_handler = mt8195_scp_irq_handler,
.scp_reset_assert = mt8192_scp_reset_assert,
.scp_reset_deassert = mt8192_scp_reset_deassert,
- .scp_stop = mt8192_scp_stop,
+ .scp_stop = mt8188_scp_stop,
.scp_da_to_va = mt8192_scp_da_to_va,
.host_to_scp_reg = MT8192_GIPC_IN_SET,
.host_to_scp_int_bit = MT8192_HOST_IPC_INT_BIT,
};
+static const struct mtk_scp_of_data mt8188_of_data_c1 = {
+ .scp_clk_get = mt8195_scp_clk_get,
+ .scp_before_load = mt8188_scp_c1_before_load,
+ .scp_irq_handler = mt8195_scp_c1_irq_handler,
+ .scp_reset_assert = mt8195_scp_c1_reset_assert,
+ .scp_reset_deassert = mt8195_scp_c1_reset_deassert,
+ .scp_stop = mt8188_scp_c1_stop,
+ .scp_da_to_va = mt8192_scp_da_to_va,
+ .host_to_scp_reg = MT8192_GIPC_IN_SET,
+ .host_to_scp_int_bit = MT8195_CORE1_HOST_IPC_INT_BIT,
+};
+
static const struct mtk_scp_of_data mt8192_of_data = {
.scp_clk_get = mt8192_scp_clk_get,
.scp_before_load = mt8192_scp_before_load,
@@ -1310,6 +1443,12 @@ static const struct mtk_scp_of_data mt8195_of_data_c1 = {
.host_to_scp_int_bit = MT8195_CORE1_HOST_IPC_INT_BIT,
};
+static const struct mtk_scp_of_data *mt8188_of_data_cores[] = {
+ &mt8188_of_data,
+ &mt8188_of_data_c1,
+ NULL
+};
+
static const struct mtk_scp_of_data *mt8195_of_data_cores[] = {
&mt8195_of_data,
&mt8195_of_data_c1,
@@ -1320,6 +1459,7 @@ static const struct of_device_id mtk_scp_of_match[] = {
{ .compatible = "mediatek,mt8183-scp", .data = &mt8183_of_data },
{ .compatible = "mediatek,mt8186-scp", .data = &mt8186_of_data },
{ .compatible = "mediatek,mt8188-scp", .data = &mt8188_of_data },
+ { .compatible = "mediatek,mt8188-scp-dual", .data = &mt8188_of_data_cores },
{ .compatible = "mediatek,mt8192-scp", .data = &mt8192_of_data },
{ .compatible = "mediatek,mt8195-scp", .data = &mt8195_of_data },
{ .compatible = "mediatek,mt8195-scp-dual", .data = &mt8195_of_data_cores },
--
2.6.4
More information about the Linux-mediatek
mailing list