[PATCH net-next v3 0/2] Read PHY address of switch from device tree on MT7530 DSA subdriver

Arınç ÜNAL via B4 Relay devnull+arinc.unal.arinc9.com at kernel.org
Wed Apr 17 22:35:29 PDT 2024


This patch series makes the driver read the PHY address the switch listens
on from the device tree which, in result, brings support for MT7530
switches listening on a different PHY address than 31. And the patch series
simplifies the core operations.

Signed-off-by: Arınç ÜNAL <arinc.unal at arinc9.com>
---
Changes in v3:
- Patch 1
  - Whilst compiling, GCC suggests parentheses around '+' in operand of
    '&'. Address that on the MT753X_CTRL_PHY_ADDR macro.
  - Instead of storing the PHY address in the mt7530_priv structure, store
    the MDIO device pointer as suggested by Florian.
- Link to v2: https://lore.kernel.org/r/20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v2-0-1a7649c4d3b6@arinc9.com

Changes in v2:
- Patch 1
  - Use a more efficient definition for the MT753X_CTRL_PHY_ADDR macro
    provided by Daniel.
- Link to v1: https://lore.kernel.org/r/20240414-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-v1-0-b08936df2770@arinc9.com

---
Arınç ÜNAL (2):
      net: dsa: mt7530-mdio: read PHY address of switch from device tree
      net: dsa: mt7530: simplify core operations

 drivers/net/dsa/mt7530-mdio.c |  28 +++++-----
 drivers/net/dsa/mt7530.c      | 127 +++++++++++++++++++-----------------------
 drivers/net/dsa/mt7530.h      |   4 +-
 3 files changed, 75 insertions(+), 84 deletions(-)
---
base-commit: 2bd99aef1b19e6da09eff692bc0a09d61d785782
change-id: 20240324-b4-for-netnext-mt7530-phy-addr-from-dt-and-simplify-core-ops-64476588ebea

Best regards,
-- 
Arınç ÜNAL <arinc.unal at arinc9.com>





More information about the Linux-mediatek mailing list