[PATCH net-next] net: dsa: mt753x: remove mt753x_phylink_pcs_link_up()
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Wed Sep 27 05:13:56 PDT 2023
Remove the mt753x_phylink_pcs_link_up() function for two reasons:
1) priv->pcs[i].pcs.neg_mode is set true, meaning it doesn't take a
MLO_AN_FIXED anymore, but one of PHYLINK_PCS_NEG_*. However, this
is inconsequential due to...
2) priv->pcs[port].pcs.ops is always initialised to point at
mt7530_pcs_ops, which does not have a pcs_link_up() member.
So, let's remove mt753x_phylink_pcs_link_up() entirely.
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
drivers/net/dsa/mt7530.c | 11 -----------
1 file changed, 11 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 035a34b50f31..0d62c69dfbb6 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2824,15 +2824,6 @@ static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}
-static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
- unsigned int mode,
- phy_interface_t interface,
- int speed, int duplex)
-{
- if (pcs->ops->pcs_link_up)
- pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
-}
-
static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
@@ -2921,8 +2912,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
return ret;
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
- mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
- interface, speed, DUPLEX_FULL);
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
speed, DUPLEX_FULL, true, true);
--
2.30.2
More information about the Linux-mediatek
mailing list