[PATCH 00/10] Add mediate-drm secure flow for SVP

[Jeffrey Kardatzke]

On Tue, Sep 19, 2023 at 10:26 PM CK Hu (胡俊光) <ck.hu at mediatek.com> wrote:
>
> Hi, Jason:
>
> On Tue, 2023-09-19 at 11:03 +0800, Jason-JH.Lin wrote:
> > The patch series provides drm driver support for enabling secure
> > video
> > path (SVP) playback on MediaiTek hardware in the Linux kernel.
> >
> > Memory Definitions:
> > secure memory - Memory allocated in the TEE (Trusted Execution
> > Environment) which is inaccessible in the REE (Rich Execution
> > Environment, i.e. linux kernel/userspace).
> > secure handle - Integer value which acts as reference to 'secure
> > memory'. Used in communication between TEE and REE to reference
> > 'secure memory'.
> > secure buffer - 'secure memory' that is used to store decrypted,
> > compressed video or for other general purposes in the TEE.
> > secure surface - 'secure memory' that is used to store graphic
> > buffers.
> >
> > Memory Usage in SVP:
> > The overall flow of SVP starts with encrypted video coming in from an
> > outside source into the REE. The REE will then allocate a 'secure
> > buffer' and send the corresponding 'secure handle' along with the
> > encrypted, compressed video data to the TEE. The TEE will then
> > decrypt
> > the video and store the result in the 'secure buffer'. The REE will
> > then allocate a 'secure surface'. The REE will pass the 'secure
> > handles' for both the 'secure buffer' and 'secure surface' into the
> > TEE for video decoding. The video decoder HW will then decode the
> > contents of the 'secure buffer' and place the result in the 'secure
> > surface'. The REE will then attach the 'secure surface' to the
> > overlay
> > plane for rendering of the video.
> >
> > Everything relating to ensuring security of the actual contents of
> > the
> > 'secure buffer' and 'secure surface' is out of scope for the REE and
> > is the responsibility of the TEE.
> >
> > DRM driver handles allocation of gem objects that are backed by a
> > 'secure
> > surface' and for displaying a 'secure surface' on the overlay plane.
> > This introduces a new flag for object creation called
> > DRM_MTK_GEM_CREATE_ENCRYPTED which indicates it should be a 'secure
> > surface'. All changes here are in MediaTek specific code.
>
> How do you define SVP? Is there standard requirement we could refer to?
> If the secure video buffer is read by display hardware and output to
> HDMI without any protection and user could capture HDMI signal, is this
> secure?

SVP (Secure Video Path) is essentially the video being completed
isolated from the kernel/userspace. The specific requirements for it
vary between implementations.

Regarding HDMI/HDCP output; it's the responsibility of the TEE to
enforce that. Nothing on the kernel/userspace side needs to be
concerned about enforcing HDCP. The only thing userspace is involved
in there is actually turning on HDCP via the kernel drivers; and then
the TEE ensures that it is active if the policy for the encrypted
content requires it.
>
> Regards,
> CK
>
> >
> > ---
> > Based on 2 series:
> > [1] Add CMDQ secure driver for SVP
> > -
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=785332__;!!CTRNKA9wMg0ARbw!mPocbQwZ4-25DmidvAgd9K5eXjNEhSyIKpvvYHPpdrq2PgS-hkYyHohzDvoJydD45UZp5JvY9DuDVFj1ltVnhGY$
> >
> >
> > [2] dma-buf: heaps: Add MediaTek secure heap
> > -
> > https://urldefense.com/v3/__https://patchwork.kernel.org/project/linux-mediatek/list/?series=782776__;!!CTRNKA9wMg0ARbw!mPocbQwZ4-25DmidvAgd9K5eXjNEhSyIKpvvYHPpdrq2PgS-hkYyHohzDvoJydD45UZp5JvY9DuDVFj10sD4kHE$
> >
> > ---
> >
> > CK Hu (1):
> >   drm/mediatek: Add interface to allocate MediaTek GEM buffer.
> >
> > Jason-JH.Lin (9):
> >   drm/mediatek/uapi: Add DRM_MTK_GEM_CREATED_ENCRYPTTED flag
> >   drm/mediatek: Add secure buffer control flow to mtk_drm_gem
> >   drm/mediatek: Add secure identify flag and funcution to
> > mtk_drm_plane
> >   drm/mediatek: Add mtk_ddp_sec_write to config secure buffer info
> >   drm/mediatek: Add get_sec_port interface to mtk_ddp_comp
> >   drm/mediatek: Add secure layer config support for ovl
> >   drm/mediatek: Add secure layer config support for ovl_adaptor
> >   drm/mediatek: Add secure flow support to mediatek-drm
> >   arm64: dts: mt8195-cherry: Add secure mbox settings for vdosys
> >
> >  .../boot/dts/mediatek/mt8195-cherry.dtsi      |  10 +
> >  drivers/gpu/drm/mediatek/mtk_disp_drv.h       |   3 +
> >  drivers/gpu/drm/mediatek/mtk_disp_ovl.c       |  31 +-
> >  .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   |  15 +
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 271
> > +++++++++++++++++-
> >  drivers/gpu/drm/mediatek/mtk_drm_crtc.h       |   1 +
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  14 +
> >  drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   |  13 +
> >  drivers/gpu/drm/mediatek/mtk_drm_drv.c        |  16 +-
> >  drivers/gpu/drm/mediatek/mtk_drm_gem.c        | 121 ++++++++
> >  drivers/gpu/drm/mediatek/mtk_drm_gem.h        |  16 ++
> >  drivers/gpu/drm/mediatek/mtk_drm_plane.c      |   7 +
> >  drivers/gpu/drm/mediatek/mtk_drm_plane.h      |   2 +
> >  drivers/gpu/drm/mediatek/mtk_mdp_rdma.c       |  11 +-
> >  drivers/gpu/drm/mediatek/mtk_mdp_rdma.h       |   2 +
> >  include/uapi/drm/mediatek_drm.h               |  59 ++++
> >  16 files changed, 575 insertions(+), 17 deletions(-)
> >  create mode 100644 include/uapi/drm/mediatek_drm.h
> >