[PATCH v3 05/12] regulator: dt-bindings: mt6358: Add MT6366 PMIC
Chen-Yu Tsai
wenst at chromium.org
Tue Sep 19 21:13:24 PDT 2023
On Wed, Sep 20, 2023 at 3:57 AM Rob Herring <robh at kernel.org> wrote:
>
> On Tue, Sep 19, 2023 at 06:43:48PM +0800, Chen-Yu Tsai wrote:
> > From: Zhiyong Tao <zhiyong.tao at mediatek.com>
> >
> > The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
> > to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
> > 29 LDO regulators, not counting ones that feed internally and basically
> > have no controls. The regulators are named after their intended usage
> > for the SoC and system design, thus not named generically as ldoX or
> > dcdcX, but as vcn33 or vgpu.
> >
> > The differences compared to the MT6358 are minimal:
> > - Regulators removed: VCAMA1, VCAMA2, VCAMD, VCAMIO, VLDO28
> > - Regulators added: VM18, VMDDR, VSRAM_CORE
> >
> > Add a binding document describing all the regulators and their supplies.
> >
> > Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
> > [wens at chromium.org: major rework and added commit message]
> > Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> > ---
> > Changes since v2:
> > - Merged all the propertyPatterns together; the if-then sections now
> > only block out invalid properties
> >
> > Changes since v1:
> > - Replaced underscores in supply names to hyphens
> > - Merged with MT6358 regulator binding
> > - Added MT6358 fallback compatible to MT6366 regulator
> >
> > Changes since Zhiyong's last version (v4) [1]:
> > - simplified regulator names
> > - added descriptions to regulators
> > - removed bogus regulators (*_sshub)
> > - merged vcn33-wifi and vcn33-bt as vcn33
> > - added missing regulators (vm18, vmddr, vsram-core)
> > - cut down examples to a handful of cases and made them complete
> > - expanded commit message a lot
> >
> > [1] https://lore.kernel.org/linux-arm-kernel/20220823123745.14061-1-zhiyong.tao@mediatek.com/
> >
> > .../regulator/mediatek,mt6358-regulator.yaml | 120 +++++++++++++++---
> > 1 file changed, 104 insertions(+), 16 deletions(-)
> >
> > diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
> > index c5f336318ec2..05e381899d08 100644
> > --- a/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
> > +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
> > @@ -16,14 +16,18 @@ description:
> >
> > properties:
> > compatible:
> > - const: mediatek,mt6358-regulator
> > + oneOf:
> > + - const: mediatek,mt6358-regulator
> > + - items:
> > + - const: mediatek,mt6366-regulator
> > + - const: mediatek,mt6358-regulator
>
> Would the mt6366 regulator driver(s) function with the mt6358 driver
> unchanged? If not, then not really much point in having the fallback.
The argument by Angelo was that the PMICs have an ID register that can be
used to identify which variant it is. The mfd and regulator drivers both
use that instead of looking at the "mt6366" compatible string. (Note the
drivers are already merged.) Yes the drivers would need changes to handle
the new ID and whatever differences between the variants. But other devices
were handling this in the same way with a fallback. Krzysztof seemed to
agree.
> >
> > vsys-ldo1-supply:
> > description: Supply for LDOs vfe28, vxo22, vcn28, vaux18, vaud28, vsim1, vusb, vbif28
> > vsys-ldo2-supply:
> > - description: Supply for LDOs vldo28, vio28, vmc, vmch, vsim2
> > + description: Supply for LDOs vldo28 (MT6358 only), vio28, vmc, vmch, vsim2
> > vsys-ldo3-supply:
> > - description: Supply for LDOs vcn33, vcama1, vcama2, vemc, vibr
> > + description: Supply for LDOs vcn33, vcama[12] (MT6358 only), vemc, vibr
> > vsys-vcore-supply:
> > description: Supply for buck regulator vcore
> > vsys-vdram1-supply:
> > @@ -43,18 +47,20 @@ properties:
> > vsys-vs2-supply:
> > description: Supply for buck regulator vs2
> > vs1-ldo1-supply:
> > - description: Supply for LDOs vrf18, vefuse, vcn18, vcamio, vio18
> > + description:
> > + Supply for LDOs vrf18, vefuse, vcn18, vcamio (MT6358 only), vio18, vm18 (MT6366 only)
> > vs2-ldo1-supply:
> > - description: Supply for LDOs vdram2
> > + description: Supply for LDOs vdram2, vmddr (MT6366 only)
> > vs2-ldo2-supply:
> > description: Supply for LDOs vrf12, va12
> > vs2-ldo3-supply:
> > - description: Supply for LDOs vsram-gpu, vsram-others, vsram-proc11, vsram-proc12
> > + description:
> > + Supply for LDOs vsram-core (MT6366 only), vsram-gpu, vsram-others, vsram-proc11, vsram-proc12
> > vs2-ldo4-supply:
> > description: Supply for LDO vcamd
> >
> > patternProperties:
> > - "^buck_v(core|dram1|gpu|modem|pa|proc1[12]|s[12])$":
> > + "^(buck_)?v(core|dram1|gpu|modem|pa|proc1[12]|s[12])$":
> > description: Buck regulators
> > type: object
> > $ref: regulator.yaml#
> > @@ -69,7 +75,7 @@ patternProperties:
> > enum: [0, 1]
> > unevaluatedProperties: false
> >
> > - "^ldo_v(a|rf)12$":
> > + "^(ldo_)?v(a|rf)12$":
> > description: LDOs with fixed 1.2V output and 0~100/10mV tuning
> > type: object
> > $ref: regulator.yaml#
> > @@ -77,15 +83,16 @@ patternProperties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_v((aux|cn|io|rf)18|camio)$":
> > - description: LDOs with fixed 1.8V output and 0~100/10mV tuning
> > + "^(ldo_)?v((aux|cn|io|rf)18|camio)$":
> > + description:
> > + LDOs with fixed 1.8V output and 0~100/10mV tuning (vcn18 on MT6366 has variable output)
> > type: object
> > $ref: regulator.yaml#
> > properties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_vxo22$":
> > + "^(ldo_)?vxo22$":
> > description: LDOs with fixed 2.2V output and 0~100/10mV tuning
> > type: object
> > $ref: regulator.yaml#
> > @@ -93,7 +100,7 @@ patternProperties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_v(aud|bif|cn|fe|io)28$":
> > + "^(ldo_)?v(aud|bif|cn|fe|io)28$":
> > description: LDOs with fixed 2.8V output and 0~100/10mV tuning
> > type: object
> > $ref: regulator.yaml#
> > @@ -101,7 +108,7 @@ patternProperties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_vusb$":
> > + "^(ldo_)?vusb$":
> > description: LDOs with fixed 3.0V output and 0~100/10mV tuning
> > type: object
> > $ref: regulator.yaml#
> > @@ -109,7 +116,7 @@ patternProperties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_vsram_(gpu|others|proc1[12])$":
> > + "^(ldo_)?vsram[_-](core|gpu|others|proc1[12])$":
> > description: LDOs with variable output
> > type: object
> > $ref: regulator.yaml#
> > @@ -117,7 +124,7 @@ patternProperties:
> > regulator-allowed-modes: false
> > unevaluatedProperties: false
> >
> > - "^ldo_v(cama[12]|camd|cn33|dram2|efuse|emc|ibr|ldo28|mc|mch|sim[12])$":
> > + "^(ldo_)?v(cama[12]|camd|cn33|dram2|efuse|emc|ibr|ldo28|m18|mc|mch|mddr|sim[12])$":
> > description: LDOs with variable output and 0~100/10mV tuning
> > type: object
> > $ref: regulator.yaml#
> > @@ -130,11 +137,50 @@ required:
> >
> > additionalProperties: false
> >
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + const: mediatek,mt6358-regulator
> > + then:
> > + patternProperties:
> > + # Old regulator node name scheme (with prefix and underscores) only
> > + # ([^y-] is used to avoid matching -supply
> > + "^(?<!buck_)(?<!ldo_)v.*[^y-](?!-supply)$": false
> > + "^ldo_vsram-": false
> > + # vsram_core regulator doesn't exist on MT6358
> > + "^ldo_vsram[-_]core$": false
> > +
> > + properties:
> > + # vm18 and vmddr regulators don't exist on MT6358
> > + ldo_vm18: false
> > + ldo_vmddr: false
> > +
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: mediatek,mt6366-regulator
> > + then:
> > + patternProperties:
> > + # Prefer cleaned up regulator node names
> > + "^(buck|ldo)_": false
> > + # Don't allow underscores
> > + "^vsram_": false
> > + # vcam* regulators don't exist on MT6366
> > + "^vcam": false
> > +
> > + properties:
> > + # vldo28 regulator doesn't exist on MT6366
> > + vldo28: false
> > + # vs2_ldo4 supply pin doesn't exist on MT6366
> > + vs2-ldo4-supply: false
> > +
> > examples:
> > - |
> > #include <dt-bindings/regulator/mediatek,mt6397-regulator.h>
> >
> > - regulator {
> > + mt6358-regulator {
>
> regulator or regulators is preferred.
Assuming we don't split the bindings again, doesn't this end up causing
the two examples to get squashed into one? That would cause verification
errors, since the two compatibles use different naming styles for their
regulator sub-nodes.
Thanks
ChenYu
> > compatible = "mediatek,mt6358-regulator";
> >
> > buck_vgpu {
> > @@ -156,4 +202,46 @@ examples:
> > };
> > };
> >
> > + mt6366-regulator {
> > + compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
> > +
> > + vdram1 {
> > + regulator-name = "pp1125_emi_vdd2";
> > + regulator-min-microvolt = <1125000>;
> > + regulator-max-microvolt = <1125000>;
> > + regulator-ramp-delay = <12500>;
> > + regulator-enable-ramp-delay = <0>;
> > + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> > + MT6397_BUCK_MODE_FORCE_PWM>;
> > + regulator-always-on;
> > + };
> > +
> > + vproc11 {
> > + regulator-name = "ppvar_dvdd_proc_bc_mt6366";
> > + regulator-min-microvolt = <600000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <200>;
> > + regulator-allowed-modes = <MT6397_BUCK_MODE_AUTO
> > + MT6397_BUCK_MODE_FORCE_PWM>;
> > + regulator-always-on;
> > + };
> > +
> > + vmddr {
> > + regulator-name = "pm0750_emi_vmddr";
> > + regulator-min-microvolt = <700000>;
> > + regulator-max-microvolt = <750000>;
> > + regulator-enable-ramp-delay = <325>;
> > + regulator-always-on;
> > + };
> > +
> > + vsram-proc11 {
> > + regulator-name = "pp0900_dvdd_sram_bc";
> > + regulator-min-microvolt = <850000>;
> > + regulator-max-microvolt = <1120000>;
> > + regulator-ramp-delay = <6250>;
> > + regulator-enable-ramp-delay = <240>;
> > + regulator-always-on;
> > + };
> > + };
> > ...
> > --
> > 2.42.0.459.ge4e396fd5e-goog
> >
More information about the Linux-mediatek
mailing list