[PATCH v2 05/11] regulator: dt-bindings: mediatek: Add MT6366 PMIC
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Fri Sep 15 01:44:11 PDT 2023
Il 23/08/23 10:07, Chen-Yu Tsai ha scritto:
> On Wed, Aug 23, 2023 at 1:45 PM Krzysztof Kozlowski
> <krzysztof.kozlowski at linaro.org> wrote:
>>
>> On 23/08/2023 06:20, Chen-Yu Tsai wrote:
>>> On Wed, Aug 23, 2023 at 3:40 AM Krzysztof Kozlowski
>>> <krzysztof.kozlowski at linaro.org> wrote:
>>>>
>>>> On 22/08/2023 21:39, Krzysztof Kozlowski wrote:
>>>>> On 22/08/2023 10:45, Chen-Yu Tsai wrote:
>>>>>> From: Zhiyong Tao <zhiyong.tao at mediatek.com>
>>>>>>
>>>>>> The MediaTek MT6366 PMIC is similar to the MT6358 PMIC. It is designed
>>>>>> to be paired with the MediaTek MT8186 SoC. It has 9 buck regulators and
>>>>>> 29 LDO regulators, not counting ones that feed internally and basically
>>>>>> have no controls. The regulators are named after their intended usage
>>>>>> for the SoC and system design, thus not named generically as ldoX or
>>>>>> dcdcX, but as vcn33 or vgpu.
>>>>>>
>>>>>> Add a binding document describing all the regulators and their supplies.
>>>>>>
>>>>>> Signed-off-by: Zhiyong Tao <zhiyong.tao at mediatek.com>
>>>>>> [wens at chromium.org: major rework and added commit message]
>>>>>> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
>>>>>> ---
>>>>>> Changes since v1:
>>>>>> - Replaced underscores in supply names to hyphens
>>>>>> - Merged with MT6358 regulator binding
>>>>>> - Added MT6358 fallback compatible to MT6366 regulator
>>>>>>
>>>>>> Changes since Zhiyong's last version (v4) [1]:
>>>>>> - simplified regulator names
>>>>>> - added descriptions to regulators
>>>>>> - removed bogus regulators (*_sshub)
>>>>>> - merged vcn33-wifi and vcn33-bt as vcn33
>>>>>> - added missing regulators (vm18, vmddr, vsram-core)
>>>>>> - cut down examples to a handful of cases and made them complete
>>>>>> - expanded commit message a lot
>>>>>>
>>>>>> [1] https://lore.kernel.org/linux-arm-kernel/20220823123745.14061-1-zhiyong.tao@mediatek.com/
>>>>>> .../regulator/mediatek,mt6358-regulator.yaml | 227 +++++++++++++-----
>>>>>> 1 file changed, 168 insertions(+), 59 deletions(-)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
>>>>>> index 82328fe17680..b350181f33ff 100644
>>>>>> --- a/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
>>>>>> +++ b/Documentation/devicetree/bindings/regulator/mediatek,mt6358-regulator.yaml
>>>>>> @@ -16,14 +16,18 @@ description: |
>>>>>>
>>>>>> properties:
>>>>>> compatible:
>>>>>> - const: mediatek,mt6358-regulator
>>>>>> + oneOf:
>>>>>> + - const: mediatek,mt6358-regulator
>>>>>> + - items:
>>>>>> + - const: mediatek,mt6366-regulator
>>>>>> + - const: mediatek,mt6358-regulator
>>>>>>
>>>>>> vsys-ldo1-supply:
>>>>>> description: Supply for LDOs vfe28, vxo22, vcn28, vaux18, vaud28, vsim1, vusb, vbif28
>>>>>> vsys-ldo2-supply:
>>>>>> - description: Supply for LDOs vldo28, vio28, vmc, vmch, vsim2
>>>>>> + description: Supply for LDOs vldo28 (MT6358 only), vio28, vmc, vmch, vsim2
>>>>>> vsys-ldo3-supply:
>>>>>> - description: Supply for LDOs vcn33, vcama1, vcama2, vemc, vibr
>>>>>> + description: Supply for LDOs vcn33, vcama[12] (MT6358 only), vemc, vibr
>>>>>> vsys-vcore-supply:
>>>>>> description: Supply for buck regulator vcore
>>>>>> vsys-vdram1-supply:
>>>>>> @@ -43,75 +47,138 @@ properties:
>>>>>> vsys-vs2-supply:
>>>>>> description: Supply for buck regulator vs2
>>>>>> vs1-ldo1-supply:
>>>>>> - description: Supply for LDOs vrf18, vefuse, vcn18, vcamio, vio18
>>>>>> + description: Supply for LDOs vrf18, vefuse, vcn18, vcamio (MT6358 only), vio18
>>>>>> vs2-ldo1-supply:
>>>>>> - description: Supply for LDOs vdram2
>>>>>> + description: Supply for LDOs vdram2, vmddr (MT6366 only)
>>>>>> vs2-ldo2-supply:
>>>>>> description: Supply for LDOs vrf12, va12
>>>>>> vs2-ldo3-supply:
>>>>>> - description: Supply for LDOs vsram-gpu, vsram-others, vsram-proc11, vsram-proc12
>>>>>> - vs2-ldo4-supply:
>>>>>> - description: Supply for LDO vcamd
>>>>>> -
>>>>>> -patternProperties:
>>>>>> - "^buck_v(core|dram1|gpu|modem|pa|proc1[12]|s[12])$":
>>>>>> - description: Buck regulators
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_v(a|rf)12":
>>>>>> - description: LDOs with fixed 1.2V output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_v((aux|cn|io|rf)18|camio)":
>>>>>> - description: LDOs with fixed 1.8V output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_vxo22":
>>>>>> - description: LDOs with fixed 2.2V output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_v(aud|bif|cn|fe|io)28":
>>>>>> - description: LDOs with fixed 2.8V output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_vusb":
>>>>>> - description: LDOs with fixed 3.0V output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_vsram_(gpu|others|proc1[12])$":
>>>>>> - description: LDOs with variable output
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>> -
>>>>>> - "^ldo_v(cama[12]|camd|cn33|dram2|efuse|emc|ibr|ldo28|mc|mch|sim[12])$":
>>>>>> - description: LDOs with variable output and 0~100/10mV tuning
>>>>>> - type: object
>>>>>> - $ref: regulator.yaml#
>>>>>> - unevaluatedProperties: false
>>>>>
>>>>> I don't understand. You just added it and it is already wrong? Please,
>>>>> do not add code which is clearly incorrect.
>>>>
>>>> Sent too early - anyway properties cannot be defined in allOf:. That's
>>>> not the place for them and there is no single reason for it. From which
>>>> regulator binding you got this example?
>>>
>>> None. It was simply a way I figured out when I was reading up on JSON
>>> schema syntax. I wanted to split the definitions cleanly, since they
>>> are very different. And with "unevaluatedProperties: false" in the base
>>> schema it did seem to work, successfully evaluating existing device trees
>>> and producing errors when extra properties were added, or if types didn't
>>> match up.
>>
>> If they are very different, this should not have been one binding. There
>> is little benefit of that.
>
> But how would one handle sharing a common fallback compatible if it were
> split? In v1 they were separate bindings, but then Angelo argued that they
> were in fact very similar and the variants can be detected through hardware
> registers.
>
> Note that the vastly different regulator names here are done for aesthetic
> reasons. The MT6358 had names with underscores and IMHO unneeded prefixes.
> These can't be changed due to existing device trees using them. (Or we
> could break the ABI.) With the MT6366 I chose to simplify them to match
> the exact names from the datasheet, except for the underscores.
>
> ChenYu
>
>>> Now that you mention it, I suppose the preferred way to write it is to
>>> have all the properties in the base schema, then negate the ones that
>>> don't belong in the allOf: section? It just seems really repetitive given
>>> the child node names for the chip variants are completely different. OOTH
>>> I guess it would produce better error messages.
>>
>>
>> For regular cases yes, but not if devices differ so much.
>>
Summarizing the important info:
- Chips are not "very different"
- Main changes in schema are just cosmetic
Blurb below... :-)
MT6358 and MT6366 have minimal differences from a driver perspective but then
bindings describe hardware, not drivers, that's a fact and there's nothing to
argue about that (and infact I won't argue about that).
I've been arguing about using the same driver and about that one not needing
any special compatible for MT6366 because (as ChenYu said) the only difference
- again, from a software perspective - is that the big list of regulators "swaps"
(permit me the term...) 3 regulators and drops one: everything is handled the
very same way anyway.
This brings us to this point, where ChenYu *rightfully* wants to rename the actual
regulator names, because we shouldn't see underscores in devicetrees for multiple
reasons (which I surely don't have to explain of course) - even though the "right"
name as stated in datasheets contain underscores instead of dashes.
And there we go: all those changes in bindings are just because cosmetic stuff.
That said.....
I think that the real issue here can be solved with one easy question to Krzysztof:
in this case, where we want to use a different name (s/_/-/g) for regulators,
should we create a new yaml file, or should we update mt6358-regulator.yaml (but
obviously keeping the old cosmetics for the existing devicetrees and new for new)?
And - In case the best option would be to create a new mt6366-regulator.yaml,
would it be advisable to use a new compatible, or can we reuse the
"mediatek,mt6358-regulator" compatible?
Clearly, in the latter case, our target would be to have a devicetree declaring
regulator {
compatible = "mediatek,mt6366-regulator", "mediatek,mt6358-regulator";
... everything else ...
}
Cheers,
Angelo
More information about the Linux-mediatek
mailing list