[PATCH 3/3] arm64: dts: mediatek: mt8365-pumpkin: Add overlays for thp7312 cameras

[Krzysztof Kozlowski]

On 06/09/2023 10:32, Laurent Pinchart wrote:
> Hi Krzysztof,
> 
> On Wed, Sep 06, 2023 at 09:27:07AM +0200, Krzysztof Kozlowski wrote:
>> On 06/09/2023 01:31, Paul Elder wrote:
>>> Add overlays for the Pumpkin i350 to support THP7312 cameras.
>>>
>>> Signed-off-by: Paul Elder <paul.elder at ideasonboard.com>
>>> ---
>>>  arch/arm64/boot/dts/mediatek/Makefile         |  4 +
>>>  .../mt8365-pumpkin-common-thp7312.dtsi        | 23 ++++++
>>>  .../mt8365-pumpkin-csi0-thp7312-imx258.dtso   | 73 +++++++++++++++++++
>>>  .../mt8365-pumpkin-csi1-thp7312-imx258.dtso   | 73 +++++++++++++++++++
>>>  4 files changed, 173 insertions(+)
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi0-thp7312-imx258.dtso
>>>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-pumpkin-csi1-thp7312-imx258.dtso
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
>>> index 20570bc40de8..ceaf24105001 100644
>>> --- a/arch/arm64/boot/dts/mediatek/Makefile
>>> +++ b/arch/arm64/boot/dts/mediatek/Makefile
>>> @@ -56,4 +56,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-pumpkin.dtb
>>>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
>>>  
>>> +mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi0-thp7312-imx258.dtbo
>>> +mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-csi1-thp7312-imx258.dtbo
>>>  mtk-mt8365-pumpkin-dtbs := mt8365-pumpkin.dtb mt8365-pumpkin-ethernet-usb.dtbo
>>> +
>>> +dtb-$(CONFIG_ARCH_MEDIATEK) += mtk-mt8365-pumpkin.dtb
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
>>> new file mode 100644
>>> index 000000000000..478697552617
>>> --- /dev/null
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8365-pumpkin-common-thp7312.dtsi
>>> @@ -0,0 +1,23 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> +/*
>>> + * Copyright (c) 2023 Ideas on Board
>>> + * Author: Paul Elder <paul.elder at ideasonboard.com>
>>> + */
>>> +
>>> +/dts-v1/;
>>> +/plugin/;
>>> +
>>> +&{/} {
>>> +	vsys_v4p2: regulator at 0 {
>>
>> Hm? Is this a bus?
> 
> There are multiple instances of "numbered" regulators in upstream DT
> files, for instance arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi

That's the only example I saw... I fixed it now.

> has a regulator at 0. There are similar instances for clocks.
> 
> I understand why it may not be a good idea, and how the root node is
> indeed not a bus. In some cases, those regulators and clocks are grouped
> in a regulators or clocks node that has a "simple-bus" compatible. I'm
> not sure if that's a good idea, but at least it should validate.
> 
> What's the best practice for discrete board-level clocks and regulators
> in overlays ? How do we ensure that their node name will not conflict
> with the board to which the overlay is attached ?

Top-level nodes (so under /) do not have unit addresses. If they have -
it's an error, because it is not a bus. Also, unit address requires reg.
No reg? No unit address. DTC reports this as warnings as well.


>>> +		orientation = <0>;
>>> +		rotation = <0>;
>>> +
>>> +		thine,rx,data-lanes = <4 1 3 2>;
>>
>> NAK for this property.
> 
> Please explain why. You commented very briefly in the bindings review,
> and it wasn't clear to me if you were happy or not with the property,
> and if not, why.

Because it is duplicating endpoint. At least from the description.


Best regards,
Krzysztof