[PATCH v2 2/7] drm: ci: Force db410c to host mode

[Dmitry Baryshkov]

On Mon, 4 Sept 2023 at 19:16, Vignesh Raman <vignesh.raman at collabora.com> wrote:
>
> Force db410c to host mode to fix network issue which results in failure
> to mount root fs via NFS.
> See https://gitlab.freedesktop.org/gfx-ci/linux/-/commit/cb72a629b8c15c80a54dda510743cefd1c4b65b8
>
> Use fdtoverlay command to merge base device tree with an overlay
> which contains the fix for USB controllers to work in host mode.
>
> Signed-off-by: Vignesh Raman <vignesh.raman at collabora.com>
> ---
>
> v2:
>   - Use fdtoverlay command to merge overlay dtbo with the base dtb instead of modifying the kernel sources
>
> ---
>  drivers/gpu/drm/ci/build.sh                         |  5 +++++
>  .../gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts  | 13 +++++++++++++
>  2 files changed, 18 insertions(+)
>  create mode 100644 drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts
>
> diff --git a/drivers/gpu/drm/ci/build.sh b/drivers/gpu/drm/ci/build.sh
> index 7b014287a041..92ffd98cd09e 100644
> --- a/drivers/gpu/drm/ci/build.sh
> +++ b/drivers/gpu/drm/ci/build.sh
> @@ -92,6 +92,11 @@ done
>
>  if [[ -n ${DEVICE_TREES} ]]; then
>      make dtbs
> +    if [[ -e arch/arm64/boot/dts/qcom/apq8016-sbc.dtb ]]; then
> +        dtc -@ -I dts -O dtb -o drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dtbo drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts
> +        fdtoverlay -i arch/arm64/boot/dts/qcom/apq8016-sbc.dtb -o arch/arm64/boot/dts/qcom/apq8016-sbc-overlay.dtb drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dtbo
> +        mv arch/arm64/boot/dts/qcom/apq8016-sbc-overlay.dtb arch/arm64/boot/dts/qcom/apq8016-sbc.dtb
> +    fi
>      cp ${DEVICE_TREES} /lava-files/.
>  fi
>
> diff --git a/drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts b/drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts
> new file mode 100644
> index 000000000000..57b7604f1c23
> --- /dev/null
> +++ b/drivers/gpu/drm/ci/dt-overlays/apq8016-sbc-overlay.dts
> @@ -0,0 +1,13 @@
> +/dts-v1/;
> +/plugin/;
> +
> +/ {
> +    fragment at 0 {
> +        target-path = "/soc at 0";
> +        __overlay__ {
> +            usb at 78d9000 {
> +                dr_mode = "host";
> +            };
> +        };
> +    };
> +};
> --
> 2.40.1

Can we use normal dtso syntax here instead of defining fragments manually?

-- 
With best wishes
Dmitry