[next] wifi: mt76: mt7921: fix the missing default CLC channel config value

[Deren Wu]

From: Ming Yen Hsieh <mingyen.hsieh at mediatek.com>

No matter CLC is enabled or disabled, the driver should initialize
the default value for channel configuration of CLC.

Reported-and-tested-by: Ben Greear <greearb at candelatech.com>
Closes: https://lore.kernel.org/all/2fb78387-d226-3193-8ca7-90040561b9ad@candelatech.com/
Fixes: 09382d8f8641 ("mt7921: update the channel usage when the regd domain changed")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh at mediatek.com>
Signed-off-by: Deren Wu <deren.wu at mediatek.com>
---
 drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
index 63f3d4a5c9aa..2cc2d2788f83 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7921/mcu.c
@@ -375,6 +375,7 @@ static int mt7921_load_clc(struct mt792x_dev *dev, const char *fw_name)
 	int ret, i, len, offset = 0;
 	u8 *clc_base = NULL, hw_encap = 0;
 
+	dev->phy.clc_chan_conf = 0xff;
 	if (mt7921_disable_clc ||
 	    mt76_is_usb(&dev->mt76))
 		return 0;
-- 
2.18.0