Aw: [RFC v1] arm64: dts: mediatek: add dtbs with applied overlays for bpi-r3

[Frank Wunderlich]

Hi

thinked a bit again on this Patch as i try to summarize sent patches
in 1 series to make it easier for maintainer to pick up.

> > Gesendet: Samstag, 16. September 2023 um 10:32 Uhr
> > Von: "Frank Wunderlich" <linux at fw-web.de>
> > An: linux-mediatek at lists.infradead.org
> > Cc: "Frank Wunderlich" <frank-w at public-files.de>, "Matthias Brugger" <matthias.bgg at gmail.com>, "AngeloGioacchino Del Regno" <angelogioacchino.delregno at collabora.com>, "Rob Herring" <robh+dt at kernel.org>, "Krzysztof Kozlowski" <krzysztof.kozlowski+dt at linaro.org>, "Conor Dooley" <conor+dt at kernel.org>, linux-kernel at vger.kernel.org, linux-arm-kernel at lists.infradead.org
> > Betreff: [RFC v1] arm64: dts: mediatek: add dtbs with applied overlays for bpi-r3
> >
> > From: Frank Wunderlich <frank-w at public-files.de>
> >
> > Build devicetree binaries for testing overlays and providing users
> > full dtb without using overlays.
> >
> > Suggested-by: Rob Herring <robh+dt at kernel.org>
> > Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> > ---
> > based on discussion here:
> > https://lore.kernel.org/all/CAL_JsqK_3xxD0DFwipXO85P=q=EYjUdjE1_8g1MKtvw3vVzx5A@mail.gmail.com/
> > https://lore.kernel.org/all/CAL_JsqJSi=kJSix=f3787ULZnaCy_Y26Phdhy5y9fat_vkDuUw@mail.gmail.com/
> > ---
> >  arch/arm64/boot/dts/mediatek/Makefile | 8 ++++++++
> >  1 file changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> > index c99c3372a4b5..18be027bf6b4 100644
> > --- a/arch/arm64/boot/dts/mediatek/Makefile
> > +++ b/arch/arm64/boot/dts/mediatek/Makefile
> > @@ -13,6 +13,14 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc.dtbo
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nand.dtbo
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-nor.dtbo
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd.dtbo
> > +mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-emmc.dtbo mt7986a-bananapi-bpi-r3-nand.dtbo
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb
> > +mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-emmc.dtbo mt7986a-bananapi-bpi-r3-nor.dtbo
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb
> > +mt7986a-bananapi-bpi-r3-sd-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-sd.dtbo mt7986a-bananapi-bpi-r3-nand.dtbo
> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb
> > +mt7986a-bananapi-bpi-r3-sd-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb mt7986a-bananapi-bpi-r3-sd.dtbo mt7986a-bananapi-bpi-r3-nor.dtbo

maybe this is nicer?

mt7986a-bananapi-bpi-r3-emmc-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb \
					  mt7986a-bananapi-bpi-r3-emmc.dtbo \
					  mt7986a-bananapi-bpi-r3-nand.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nand.dtb
mt7986a-bananapi-bpi-r3-emmc-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb \
					 mt7986a-bananapi-bpi-r3-emmc.dtbo \
					 mt7986a-bananapi-bpi-r3-nor.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-emmc-nor.dtb
mt7986a-bananapi-bpi-r3-sd-nand-dtbs := mt7986a-bananapi-bpi-r3.dtb \
					mt7986a-bananapi-bpi-r3-sd.dtbo \
					mt7986a-bananapi-bpi-r3-nand.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nand.dtb
mt7986a-bananapi-bpi-r3-sd-nor-dtbs := mt7986a-bananapi-bpi-r3.dtb \
				       mt7986a-bananapi-bpi-r3-sd.dtbo \
				       mt7986a-bananapi-bpi-r3-nor.dtbo
dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb

here i tried to align the text on first name, but this results in visible stairs.
maybe only 1 tab to indent here (or anything else)? what do you think? In the end
better readable as 1 long line.

the SATA-Patch [1] will then add a line to each of the 4 blocks here (+5 lines in total except changes by adding the backslash).

> > +dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-bananapi-bpi-r3-sd-nor.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
> >  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
> > --
> > 2.34.1
> >

regards Frank

[1] https://patchwork.kernel.org/project/linux-mediatek/patch/20230901072730.13571-1-linux@fw-web.de/