[PATCH 04/11] wifi: mt76: mt7996: add thermal sensor device support

[Shayne Chen]

From: Howard Hsu <howard-yh.hsu at mediatek.com>

This patch adds support for thermal sensor device, including the
following features:
- Support to read current chip temperature.
- Support to set/get the trigger/restore temperature for thermal service.
- Support to read current chip tx cycle.

Signed-off-by: Howard Hsu <howard-yh.hsu at mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen at mediatek.com>
---
 .../net/wireless/mediatek/mt76/mt7996/init.c  | 88 +++++++++++++++++++
 .../net/wireless/mediatek/mt76/mt7996/mcu.c   | 42 +++++++++
 2 files changed, 130 insertions(+)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/init.c b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
index 02b47b299ea8..e2d08bf96eb0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/init.c
@@ -5,6 +5,8 @@
 
 #include <linux/etherdevice.h>
 #include <linux/of.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
 #include <linux/thermal.h>
 #include "mt7996.h"
 #include "mac.h"
@@ -43,6 +45,82 @@ static const struct ieee80211_iface_combination if_comb[] = {
 	}
 };
 
+static ssize_t mt7996_thermal_temp_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct mt7996_phy *phy = dev_get_drvdata(dev);
+	int i = to_sensor_dev_attr(attr)->index;
+	int temperature;
+
+	switch (i) {
+	case 0:
+		temperature = mt7996_mcu_get_temperature(phy);
+		if (temperature < 0)
+			return temperature;
+		/* display in millidegree celcius */
+		return sprintf(buf, "%u\n", temperature * 1000);
+	case 1:
+	case 2:
+		return sprintf(buf, "%u\n",
+			       phy->throttle_temp[i - 1] * 1000);
+	case 3:
+		return sprintf(buf, "%hhu\n", phy->throttle_state);
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t mt7996_thermal_temp_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	struct mt7996_phy *phy = dev_get_drvdata(dev);
+	int ret, i = to_sensor_dev_attr(attr)->index;
+	long val;
+
+	ret = kstrtol(buf, 10, &val);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&phy->dev->mt76.mutex);
+	val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), 40, 130);
+
+	/* add a safety margin ~10 */
+	if ((i - 1 == MT7996_CRIT_TEMP_IDX &&
+	     val > phy->throttle_temp[MT7996_MAX_TEMP_IDX] - 10) ||
+	    (i - 1 == MT7996_MAX_TEMP_IDX &&
+	     val - 10 < phy->throttle_temp[MT7996_CRIT_TEMP_IDX])) {
+		dev_err(phy->dev->mt76.dev,
+			"temp1_max shall be 10 degrees higher than temp1_crit.");
+		mutex_unlock(&phy->dev->mt76.mutex);
+		return -EINVAL;
+	}
+
+	phy->throttle_temp[i - 1] = val;
+	mutex_unlock(&phy->dev->mt76.mutex);
+
+	ret = mt7996_mcu_set_thermal_protect(phy, true);
+	if (ret)
+		return ret;
+
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(temp1_input, mt7996_thermal_temp, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_crit, mt7996_thermal_temp, 1);
+static SENSOR_DEVICE_ATTR_RW(temp1_max, mt7996_thermal_temp, 2);
+static SENSOR_DEVICE_ATTR_RO(throttle1, mt7996_thermal_temp, 3);
+
+static struct attribute *mt7996_hwmon_attrs[] = {
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_crit.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_throttle1.dev_attr.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(mt7996_hwmon);
+
 static int
 mt7996_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
 				      unsigned long *state)
@@ -113,6 +191,7 @@ static int mt7996_thermal_init(struct mt7996_phy *phy)
 {
 	struct wiphy *wiphy = phy->mt76->hw->wiphy;
 	struct thermal_cooling_device *cdev;
+	struct device *hwmon;
 	const char *name;
 
 	name = devm_kasprintf(&wiphy->dev, GFP_KERNEL, "mt7996_%s",
@@ -131,6 +210,15 @@ static int mt7996_thermal_init(struct mt7996_phy *phy)
 	phy->throttle_temp[MT7996_CRIT_TEMP_IDX] = MT7996_CRIT_TEMP;
 	phy->throttle_temp[MT7996_MAX_TEMP_IDX] = MT7996_MAX_TEMP;
 
+	if (!IS_REACHABLE(CONFIG_HWMON))
+		return 0;
+
+	hwmon = devm_hwmon_device_register_with_groups(&wiphy->dev, name, phy,
+						       mt7996_hwmon_groups);
+
+	if (IS_ERR(hwmon))
+		return PTR_ERR(hwmon);
+
 	return 0;
 }
 
diff --git a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
index 34e83795c76b..61c0d4ff9653 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7996/mcu.c
@@ -3602,6 +3602,48 @@ int mt7996_mcu_get_chan_mib_info(struct mt7996_phy *phy, bool chan_switch)
 	return 0;
 }
 
+int mt7996_mcu_get_temperature(struct mt7996_phy *phy)
+{
+#define TEMPERATURE_QUERY 0
+#define GET_TEMPERATURE 0
+	struct {
+		u8 _rsv[4];
+
+		__le16 tag;
+		__le16 len;
+
+		u8 rsv1;
+		u8 action;
+		u8 band_idx;
+		u8 rsv2;
+	} req = {
+		.tag = cpu_to_le16(TEMPERATURE_QUERY),
+		.len = cpu_to_le16(sizeof(req) - 4),
+		.action = GET_TEMPERATURE,
+		.band_idx = phy->mt76->band_idx,
+	};
+	struct mt7996_mcu_thermal {
+		u8 _rsv[4];
+
+		__le16 tag;
+		__le16 len;
+
+		__le32 rsv;
+		__le32 temperature;
+	} __packed * res;
+	struct sk_buff *skb;
+	int ret;
+
+	ret = mt76_mcu_send_and_get_msg(&phy->dev->mt76, MCU_WM_UNI_CMD(THERMAL),
+					&req, sizeof(req), true, &skb);
+	if (ret)
+		return ret;
+
+	res = (void *)skb->data;
+
+	return le32_to_cpu(res->temperature);
+}
+
 int mt7996_mcu_set_thermal_throttling(struct mt7996_phy *phy, u8 state)
 {
 	struct {
-- 
2.39.2