[PATCH 6/7] media: mediatek: vcodec: Setting the supported vp9 level for each platform

[Sebastian Fricke]

Hey Yunfei,

please replace Setting with Set in the title.

On 16.10.2023 14:43, Yunfei Dong wrote:
>The supported resolution and fps of different platforms are not the
>same. Need to set the supported level according to the chip name.

I would suggest the following rewording:

Set the maximum VP9 codec level for each platform.
The various mediatek platforms support different levels for decoding,
the level of the codec limits among others the maximum resolution, bit
rate, frame rate and compression rate for the decoder.

With that you can add:
Reviewed-by: Sebastian Fricke <sebastian.fricke at collabora.com>

Regards,
Sebastian

>
>Signed-off-by: Yunfei Dong <yunfei.dong at mediatek.com>
>---
> .../vcodec/decoder/mtk_vcodec_dec_stateless.c | 33 +++++++++++++++++++
> 1 file changed, 33 insertions(+)
>
>diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
>index b15ed773374f..02985184fa0f 100644
>--- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
>+++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
>@@ -113,6 +113,15 @@ static const struct mtk_stateless_control mtk_stateless_controls[] = {
> 		},
> 		.codec_type = V4L2_PIX_FMT_VP9_FRAME,
> 	},
>+	{
>+		.cfg = {
>+			.id = V4L2_CID_MPEG_VIDEO_VP9_LEVEL,
>+			.min = V4L2_MPEG_VIDEO_VP9_LEVEL_1_0,
>+			.def = V4L2_MPEG_VIDEO_VP9_LEVEL_4_0,
>+			.max = V4L2_MPEG_VIDEO_VP9_LEVEL_4_1,
>+		},
>+		.codec_type = V4L2_PIX_FMT_VP9_FRAME,
>+	},
> 	{
> 		.cfg = {
> 			.id = V4L2_CID_STATELESS_HEVC_SPS,
>@@ -601,6 +610,26 @@ static void mtk_vcodec_dec_fill_h265_profile(struct v4l2_ctrl_config *cfg,
> 	};
> }
>
>+static void mtk_vcodec_dec_fill_vp9_level(struct v4l2_ctrl_config *cfg,
>+					  struct mtk_vcodec_dec_ctx *ctx)
>+{
>+	switch (ctx->dev->chip_name) {
>+	case MTK_VDEC_MT8188:
>+	case MTK_VDEC_MT8195:
>+		cfg->max = V4L2_MPEG_VIDEO_VP9_LEVEL_5_1;
>+		break;
>+	case MTK_VDEC_MT8192:
>+		cfg->max = V4L2_MPEG_VIDEO_VP9_LEVEL_5_0;
>+		break;
>+	case MTK_VDEC_MT8186:
>+		cfg->max = V4L2_MPEG_VIDEO_VP9_LEVEL_4_1;
>+		break;
>+	default:
>+		cfg->max = V4L2_MPEG_VIDEO_VP9_LEVEL_4_0;
>+		break;
>+	};
>+}
>+
> static void mtk_vcodec_dec_reset_controls(struct v4l2_ctrl_config *cfg,
> 					  struct mtk_vcodec_dec_ctx *ctx)
> {
>@@ -613,6 +642,10 @@ static void mtk_vcodec_dec_reset_controls(struct v4l2_ctrl_config *cfg,
> 		mtk_vcodec_dec_fill_h265_level(cfg, ctx);
> 		mtk_v4l2_vdec_dbg(3, ctx, "h265 supported level: %lld %lld", cfg->max, cfg->def);
> 		break;
>+	case V4L2_CID_MPEG_VIDEO_VP9_LEVEL:
>+		mtk_vcodec_dec_fill_vp9_level(cfg, ctx);
>+		mtk_v4l2_vdec_dbg(3, ctx, "vp9 supported level: %lld %lld", cfg->max, cfg->def);
>+		break;
> 	case V4L2_CID_MPEG_VIDEO_H264_PROFILE:
> 		mtk_vcodec_dec_fill_h264_profile(cfg, ctx);
> 		mtk_v4l2_vdec_dbg(3, ctx, "h264 supported profile: %lld %lld", cfg->max,
>-- 
>2.18.0
>