[PATCH v5 4/4] arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile
AngeloGioacchino Del Regno
angelogioacchino.delregno at collabora.com
Thu Oct 19 02:47:43 PDT 2023
Il 19/10/23 09:54, Jason-ch Chen ha scritto:
> From: jason-ch chen <Jason-ch.Chen at mediatek.com>
>
> MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
> and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
>
> We add basic chip support for MediaTek MT8188 on evaluation board.
>
> Signed-off-by: jason-ch chen <Jason-ch.Chen at mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 388 ++++++++
> arch/arm64/boot/dts/mediatek/mt8188.dtsi | 949 ++++++++++++++++++++
> 3 files changed, 1338 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index e6e7592a3645..8900b939ed52 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r5-sku2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> new file mode 100644
> index 000000000000..773bf84cfb94
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> @@ -0,0 +1,388 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + */
> +/dts-v1/;
> +#include "mt8188.dtsi"
> +#include "mt6359.dtsi"
> +
> +/ {
> + model = "MediaTek MT8188 evaluation board";
> + compatible = "mediatek,mt8188-evb", "mediatek,mt8188";
> +
> + aliases {
> + serial0 = &uart0;
> + i2c0 = &i2c0;
> + i2c1 = &i2c1;
> + i2c2 = &i2c2;
> + i2c3 = &i2c3;
> + i2c4 = &i2c4;
> + i2c5 = &i2c5;
> + i2c6 = &i2c6;
> + mmc0 = &mmc0;
> + };
> +
> + chosen: chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory at 40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0x80000000>;
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + scp_mem_reserved: memory at 50000000 {
> + compatible = "shared-dma-pool";
> + reg = <0 0x50000000 0 0x2900000>;
> + no-map;
> + };
> + };
> +};
> +
> +&auxadc {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c3 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c3_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c4 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c4_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c5 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c5_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&i2c6 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c6_pins>;
> + clock-frequency = <400000>;
> + status = "okay";
> +};
> +
> +&mmc0 {
> + status = "okay";
> + pinctrl-names = "default", "state_uhs";
> + pinctrl-0 = <&mmc0_default_pins>;
> + pinctrl-1 = <&mmc0_uhs_pins>;
> + bus-width = <8>;
> + max-frequency = <200000000>;
...that's how it should be ordered:
&mmc0 {
bus-width = <8>;
hs400-ds-delay = <0x1481b>;
max-frequency = <200000000>;
cap-mmc-highspeed;
cap-mmc-hw-reset;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
no-sdio;
no-sd;
non-removable;
vmmc-supply = ...
vqmmc-supply = ...
pinctrl-0 ...
pinctrl-1 ...
pinctrl-names ...
status = "okay";
};
> + cap-mmc-highspeed;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
> + supports-cqe;
> + cap-mmc-hw-reset;
> + no-sdio;
> + no-sd;
> + hs400-ds-delay = <0x1481b>;
> + vmmc-supply = <&mt6359_vemc_1_ldo_reg>;
> + vqmmc-supply = <&mt6359_vufs_ldo_reg>;
> + non-removable;
> +};
> +
> +&mt6359_vcore_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vgpu11_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vpu_buck_reg {
> + regulator-always-on;
> +};
> +
> +&mt6359_vrf12_ldo_reg {
> + regulator-always-on;
> +};
> +
> +&nor_flash {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&nor_pins_default>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + flash at 0 {
> + compatible = "jedec,spi-nor";
> + reg = <0>;
> + spi-max-frequency = <52000000>;
> + };
> +};
> +
> +&pio {
> + adsp_uart_pins: adsp-uart-pins {
> + pins-adsp-uart {
pins-tx-rx {
> + pinmux = <PINMUX_GPIO35__FUNC_O_ADSP_UTXD0>,
> + <PINMUX_GPIO36__FUNC_I1_ADSP_URXD0>;
> + };
> + };
> +
..snip..
> +
> + mmc0_uhs_pins: mmc0-uhs-pins {
> + pins-cmd-dat {
> + pinmux = <PINMUX_GPIO161__FUNC_B1_MSDC0_DAT0>,
> + <PINMUX_GPIO160__FUNC_B1_MSDC0_DAT1>,
> + <PINMUX_GPIO159__FUNC_B1_MSDC0_DAT2>,
> + <PINMUX_GPIO158__FUNC_B1_MSDC0_DAT3>,
> + <PINMUX_GPIO154__FUNC_B1_MSDC0_DAT4>,
> + <PINMUX_GPIO153__FUNC_B1_MSDC0_DAT5>,
> + <PINMUX_GPIO152__FUNC_B1_MSDC0_DAT6>,
> + <PINMUX_GPIO151__FUNC_B1_MSDC0_DAT7>,
> + <PINMUX_GPIO156__FUNC_B1_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <8>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-clk {
pins-clk-ds {
pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>,
<PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
drive-strength = <8>;
bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
};
...that's shorter: both pins are anyway sharing the same drive strength and bias.
> + pinmux = <PINMUX_GPIO157__FUNC_B1_MSDC0_CLK>;
> + drive-strength = <8>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-ds {
> + pinmux = <PINMUX_GPIO162__FUNC_B0_MSDC0_DSL>;
> + drive-strength = <8>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <PINMUX_GPIO155__FUNC_O_MSDC0_RSTB>;
> + drive-strength = <8>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + nor_pins_default: nor-pins {
> + pins0 {
pins-io-ck {
> + pinmux = <PINMUX_GPIO127__FUNC_B0_SPINOR_IO0>,
> + <PINMUX_GPIO125__FUNC_O_SPINOR_CK>,
> + <PINMUX_GPIO128__FUNC_B0_SPINOR_IO1>;
> + bias-pull-down;
> + };
> +
> + pins1 {
pins-io-cs {
> + pinmux = <PINMUX_GPIO126__FUNC_O_SPINOR_CS>,
> + <PINMUX_GPIO129__FUNC_B0_SPINOR_IO2>,
> + <PINMUX_GPIO130__FUNC_B0_SPINOR_IO3>;
> + bias-pull-up;
> + };
> + };
> +
> + spi0_pins: spi0-pins {
> + pins-spi {
> + pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
> + <PINMUX_GPIO70__FUNC_O_SPIM0_CLK>,
> + <PINMUX_GPIO71__FUNC_B0_SPIM0_MOSI>,
> + <PINMUX_GPIO72__FUNC_B0_SPIM0_MISO>;
> + bias-disable;
> + };
> + };
> +
> + spi1_pins: spi1-pins {
> + pins-spi {
> + pinmux = <PINMUX_GPIO75__FUNC_O_SPIM1_CSB>,
> + <PINMUX_GPIO76__FUNC_O_SPIM1_CLK>,
> + <PINMUX_GPIO77__FUNC_B0_SPIM1_MOSI>,
> + <PINMUX_GPIO78__FUNC_B0_SPIM1_MISO>;
> + bias-disable;
> + };
> + };
> +
> + spi2_pins: spi2-pins {
> + pins-spi {
> + pinmux = <PINMUX_GPIO79__FUNC_O_SPIM2_CSB>,
> + <PINMUX_GPIO80__FUNC_O_SPIM2_CLK>,
> + <PINMUX_GPIO81__FUNC_B0_SPIM2_MOSI>,
> + <PINMUX_GPIO82__FUNC_B0_SPIM2_MISO>;
> + bias-disable;
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + pins-uart0 {
pins-rx-tx {
> + pinmux = <PINMUX_GPIO31__FUNC_O_UTXD0>,
> + <PINMUX_GPIO32__FUNC_I1_URXD0>;
> + bias-pull-up;
> + };
> + };
> +};
> +
..snip..
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> new file mode 100644
> index 000000000000..c5af32fb7e85
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -0,0 +1,949 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Copyright (c) 2023 MediaTek Inc.
> + *
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/mediatek,mt8188-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
> +#include <dt-bindings/power/mediatek,mt8188-power.h>
> +
> +/ {
> + compatible = "mediatek,mt8188";
> + interrupt-parent = <&gic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu0: cpu at 0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x000>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu1: cpu at 100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x100>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu2: cpu at 200 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x200>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu3: cpu at 300 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x300>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu4: cpu at 400 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x400>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu5: cpu at 500 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a55";
> + reg = <0x500>;
> + enable-method = "psci";
> + clock-frequency = <2000000000>;
> + capacity-dmips-mhz = <282>;
> + cpu-idle-states = <&cpu_off_l &cluster_off_l>;
> + i-cache-size = <32768>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <128>;
> + d-cache-size = <32768>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <128>;
> + next-level-cache = <&l2_0>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu6: cpu at 600 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78";
> + reg = <0x600>;
> + enable-method = "psci";
> + clock-frequency = <2600000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> + i-cache-size = <65536>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <65536>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu7: cpu at 700 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a78";
> + reg = <0x700>;
> + enable-method = "psci";
> + clock-frequency = <2600000000>;
> + capacity-dmips-mhz = <1024>;
> + cpu-idle-states = <&cpu_off_b &cluster_off_b>;
> + i-cache-size = <65536>;
> + i-cache-line-size = <64>;
> + i-cache-sets = <256>;
> + d-cache-size = <65536>;
> + d-cache-line-size = <64>;
> + d-cache-sets = <256>;
> + next-level-cache = <&l2_1>;
> + #cooling-cells = <2>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> +
> + core1 {
> + cpu = <&cpu1>;
> + };
> +
> + core2 {
> + cpu = <&cpu2>;
> + };
> +
> + core3 {
> + cpu = <&cpu3>;
> + };
> +
> + core4 {
> + cpu = <&cpu4>;
> + };
> +
> + core5 {
> + cpu = <&cpu5>;
> + };
> +
> + core6 {
> + cpu = <&cpu6>;
> + };
> +
> + core7 {
> + cpu = <&cpu7>;
> + };
> + };
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + cpu_off_l: cpu-off-l {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x00010000>;
> + local-timer-stop;
> + entry-latency-us = <50>;
> + exit-latency-us = <95>;
> + min-residency-us = <580>;
> + };
> +
> + cpu_off_b: cpu-off-b {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x00010000>;
> + local-timer-stop;
> + entry-latency-us = <45>;
> + exit-latency-us = <140>;
> + min-residency-us = <740>;
> + };
> +
> + cluster_off_l: cluster-off-l {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x01010010>;
> + local-timer-stop;
> + entry-latency-us = <55>;
> + exit-latency-us = <155>;
> + min-residency-us = <840>;
> + };
> +
> + cluster_off_b: cluster-off-b {
> + compatible = "arm,idle-state";
> + arm,psci-suspend-param = <0x01010010>;
> + local-timer-stop;
> + entry-latency-us = <50>;
> + exit-latency-us = <200>;
> + min-residency-us = <1000>;
> + };
> + };
> +
> + l2_0: l2-cache0 {
> + compatible = "cache";
> + cache-level = <2>;
NACK. You're not specifying the L2 cache correctly.
Hint: the missing properties are
cache-size
cache-line-size
cache-sets
> + next-level-cache = <&l3_0>;
> + cache-unified;
> + };
> +
> + l2_1: l2-cache1 {
> + compatible = "cache";
> + cache-level = <2>;
Same here. Please properly define the L2 cache.
> + next-level-cache = <&l3_0>;
> + cache-unified;
> + };
> +
> + l3_0: l3-cache {
> + compatible = "cache";
And again.
This SoC has 256KB L2 shared between the two A78 cores, 128KB L2 shared
between the A55 cores, and 2MB of L3 cache shared across all.
> + cache-level = <3>;
> + cache-unified;
> + };
> + };
> +
> + clk13m: oscillator-13m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <13000000>;
> + clock-output-names = "clk13m";
> + };
> +
> + clk26m: oscillator-26m {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + clk32k: oscillator-32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "clk32k";
> + };
> +
> + pmu-a55 {
> + compatible = "arm,cortex-a55-pmu";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster0>;
> + };
> +
> + pmu-a78 {
> + compatible = "arm,cortex-a78-pmu";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH &ppi_cluster1>;
> + };
Question: Is the ARM DSU PMU broken also on this SoC's TZ firmware?!
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + timer: timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
> + clock-frequency = <13000000>;
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller at c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + #redistributor-regions = <1>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x40000>,
> + <0 0x0c040000 0 0x200000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +
> + ppi-partitions {
> + ppi_cluster0: interrupt-partition-0 {
> + affinity = <&cpu0 &cpu1 &cpu2 &cpu3 &cpu4 &cpu5>;
> + };
> +
> + ppi_cluster1: interrupt-partition-1 {
> + affinity = <&cpu6 &cpu7>;
> + };
> + };
> + };
> +
> + topckgen: syscon at 10000000 {
> + compatible = "mediatek,mt8188-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg_ao: syscon at 10001000 {
> + compatible = "mediatek,mt8188-infracfg-ao", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon at 10003000 {
> + compatible = "mediatek,mt8188-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pio: pinctrl at 10005000 {
> + compatible = "mediatek,mt8188-pinctrl";
> + reg = <0 0x10005000 0 0x1000>,
> + <0 0x11c00000 0 0x1000>,
> + <0 0x11e10000 0 0x1000>,
> + <0 0x11e20000 0 0x1000>,
> + <0 0x11ea0000 0 0x1000>,
> + <0 0x1000b000 0 0x1000>;
> + reg-names = "iocfg0", "iocfg_rm",
> + "iocfg_lt", "iocfg_lm", "iocfg_rt",
> + "eint";
reg-names = "iocfg0", "iocfg_rm", "iocfg_lt",
"iocfg_lm", "iocfg_rt", "eint";
one less line :-)
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&pio 0 0 176>;
> + interrupt-controller;
> + interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH 0>;
> + #interrupt-cells = <2>;
> + };
> +
> + watchdog: watchdog at 10007000 {
> + compatible = "mediatek,mt8188-wdt";
> + mediatek,disable-extrst;
> + reg = <0 0x10007000 0 0x100>;
mediatek,disable-extrst goes here.
> + #reset-cells = <1>;
> + };
> +
> + apmixedsys: syscon at 1000c000 {
> + compatible = "mediatek,mt8188-apmixedsys", "syscon";
> + reg = <0 0x1000c000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + systimer: timer at 10017000 {
> + compatible = "mediatek,mt8188-timer", "mediatek,mt6765-timer";
> + reg = <0 0x10017000 0 0x1000>;
> + reg-names = "sys_timer_base";
You don't need reg-names here but anyway, if you really want to keep that, please
no underscores when possible.
> + interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
> + clocks = <&clk13m>;
> + };
> +
Regards,
Angelo
More information about the Linux-mediatek
mailing list