[PATCH] drm: mediatek: mtk_dsi: Fix NO_EOT_PACKET settings/handling

[AngeloGioacchino Del Regno]

Il 15/09/23 12:11, Michael Walle ha scritto:
>> Due to the initial confusion about MIPI_DSI_MODE_EOT_PACKET, properly
>> renamed to MIPI_DSI_MODE_NO_EOT_PACKET, reflecting its actual meaning,
>> both the DSI_TXRX_CON register setting for bit (HSTX_)DIS_EOT and the
>> later calculation for horizontal sync-active (HSA), back (HBP) and
>> front (HFP) porches got incorrect due to the logic being inverted.
>>
>> This means that a number of settings were wrong because....:
>>   - DSI_TXRX_CON register setting: bit (HSTX_)DIS_EOT should be
>>     set in order to disable the End of Transmission packet;
>>   - Horizontal Sync and Back/Front porches: The delta used to
>>     calculate all of HSA, HBP and HFP should account for the
>>     additional EOT packet.
>>
>> Before this change...
>>   - Bit (HSTX_)DIS_EOT was being set when EOT packet was enabled;
>>   - For HSA/HBP/HFP delta... all three were wrong, as words were
>>     added when EOT disabled, instead of when EOT packet enabled!
>>
>> Invert the logic around flag MIPI_DSI_MODE_NO_EOT_PACKET in the
>> MediaTek DSI driver to fix the aforementioned issues.
>>
>> Fixes: 8b2b99fd7931 ("drm/mediatek: dsi: Fine tune the line time caused by EOTp")
>> Fixes: 2d52bfba09d1 ("drm/mediatek: add non-continuous clock mode and EOT packet control")
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>
> 

Hello CK,

can you please pick this fix?

Thanks,
Angelo