[PATCH][next] thermal: lvts: make some read-only arrays static const
Colin Ian King
colin.i.king at gmail.com
Tue Oct 17 10:16:55 PDT 2023
Don't populate the read-only arrays on the stack, instead make them
static const. Make lvts_write_config parameters cmds and nr_cmds
const too.
Signed-off-by: Colin Ian King <colin.i.king at gmail.com>
---
drivers/thermal/mediatek/lvts_thermal.c | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/thermal/mediatek/lvts_thermal.c b/drivers/thermal/mediatek/lvts_thermal.c
index 877a0e5ac3fd..b20e69cb466f 100644
--- a/drivers/thermal/mediatek/lvts_thermal.c
+++ b/drivers/thermal/mediatek/lvts_thermal.c
@@ -308,7 +308,7 @@ static int lvts_get_temp(struct thermal_zone_device *tz, int *temp)
static void lvts_update_irq_mask(struct lvts_ctrl *lvts_ctrl)
{
- u32 masks[] = {
+ static const u32 masks[] = {
LVTS_MONINT_OFFSET_SENSOR0,
LVTS_MONINT_OFFSET_SENSOR1,
LVTS_MONINT_OFFSET_SENSOR2,
@@ -400,7 +400,7 @@ static irqreturn_t lvts_ctrl_irq_handler(struct lvts_ctrl *lvts_ctrl)
{
irqreturn_t iret = IRQ_NONE;
u32 value;
- u32 masks[] = {
+ static const u32 masks[] = {
LVTS_INT_SENSOR0,
LVTS_INT_SENSOR1,
LVTS_INT_SENSOR2,
@@ -781,7 +781,7 @@ static int lvts_ctrl_init(struct device *dev, struct lvts_domain *lvts_td,
* each write in the configuration register must be separated by a
* delay of 2 us.
*/
-static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, u32 *cmds, int nr_cmds)
+static void lvts_write_config(struct lvts_ctrl *lvts_ctrl, const u32 *cmds, const int nr_cmds)
{
int i;
@@ -865,7 +865,8 @@ static int lvts_ctrl_set_enable(struct lvts_ctrl *lvts_ctrl, int enable)
static int lvts_ctrl_connect(struct device *dev, struct lvts_ctrl *lvts_ctrl)
{
- u32 id, cmds[] = { 0xC103FFFF, 0xC502FF55 };
+ u32 id;
+ static const u32 cmds[] = { 0xC103FFFF, 0xC502FF55 };
lvts_write_config(lvts_ctrl, cmds, ARRAY_SIZE(cmds));
@@ -889,7 +890,7 @@ static int lvts_ctrl_initialize(struct device *dev, struct lvts_ctrl *lvts_ctrl)
/*
* Write device mask: 0xC1030000
*/
- u32 cmds[] = {
+ static const u32 cmds[] = {
0xC1030E01, 0xC1030CFC, 0xC1030A8C, 0xC103098D, 0xC10308F1,
0xC10307A6, 0xC10306B8, 0xC1030500, 0xC1030420, 0xC1030300,
0xC1030030, 0xC10300F6, 0xC1030050, 0xC1030060, 0xC10300AC,
--
2.39.2
More information about the Linux-mediatek
mailing list