[PATCH v8 22/23] drm/mediatek: Power on devices in OVL adaptor when atomic enable

[AngeloGioacchino Del Regno]

Il 16/10/23 12:40, Hsiao Chien Sung ha scritto:
> Different from OVL, OVL adaptor is a pseudo device so we didn't
> define it in the device tree, consequently, pm_runtime_resume_and_get()
> called by .atomic_enable() powers on no device in OVL adaptor and
> leads to power outage in the corresponding IOMMU.
> 
> To resolve the issue, we implement a function to power on the RDMAs
> in OVL adaptor, and the system will make sure the IOMMU is powered on
> as well because of the device link (iommus) in the RDMA nodes in DTS.
> 
> Fixes: 5db12f5d843b ("media: drm/mediatek: Add pm runtime support for ovl and rdma")
> 
> Signed-off-by: Hsiao Chien Sung <shawn.sung at mediatek.com>
> ---
>   drivers/gpu/drm/mediatek/mtk_disp_drv.h       |  4 ++
>   .../gpu/drm/mediatek/mtk_disp_ovl_adaptor.c   | 62 +++++++++++++++++++
>   drivers/gpu/drm/mediatek/mtk_drm_crtc.c       | 28 +++------
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c   |  2 +
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h   | 20 ++++++
>   drivers/gpu/drm/mediatek/mtk_mdp_rdma.c       | 16 +++++
>   6 files changed, 111 insertions(+), 21 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> index e2b602037ac3..c44f5b31bab5 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h
> @@ -109,6 +109,8 @@ void mtk_ovl_adaptor_connect(struct device *dev, struct device *mmsys_dev,
>   			     unsigned int next);
>   void mtk_ovl_adaptor_disconnect(struct device *dev, struct device *mmsys_dev,
>   				unsigned int next);
> +int mtk_ovl_adaptor_power_on(struct device *dev);
> +void mtk_ovl_adaptor_power_off(struct device *dev);
>   int mtk_ovl_adaptor_clk_enable(struct device *dev);
>   void mtk_ovl_adaptor_clk_disable(struct device *dev);
>   void mtk_ovl_adaptor_config(struct device *dev, unsigned int w,
> @@ -150,6 +152,8 @@ void mtk_rdma_disable_vblank(struct device *dev);
>   const u32 *mtk_rdma_get_formats(struct device *dev);
>   size_t mtk_rdma_get_num_formats(struct device *dev);
>   
> +int mtk_mdp_rdma_power_on(struct device *dev);
> +void mtk_mdp_rdma_power_off(struct device *dev);
>   int mtk_mdp_rdma_clk_enable(struct device *dev);
>   void mtk_mdp_rdma_clk_disable(struct device *dev);
>   void mtk_mdp_rdma_start(struct device *dev, struct cmdq_pkt *cmdq_pkt);
> diff --git a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> index b80425360e76..8de57a5f5518 100644
> --- a/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> +++ b/drivers/gpu/drm/mediatek/mtk_disp_ovl_adaptor.c
> @@ -98,6 +98,8 @@ static const struct mtk_ddp_comp_funcs _padding = {
>   };
>   
>   static const struct mtk_ddp_comp_funcs _rdma = {
> +	.power_on = mtk_mdp_rdma_power_on,
> +	.power_off = mtk_mdp_rdma_power_off,
>   	.clk_enable = mtk_mdp_rdma_clk_enable,
>   	.clk_disable = mtk_mdp_rdma_clk_disable,
>   };
> @@ -241,6 +243,66 @@ void mtk_ovl_adaptor_stop(struct device *dev)
>   	}
>   }
>   
> +/**
> + * mtk_ovl_adaptor_power_on - Power on devices in OVL adaptor
> + * @dev: device to be powered on
> + *
> + * Different from OVL, OVL adaptor is a pseudo device so
> + * we didn't define it in the device tree, pm_runtime_resume_and_get()
> + * called by .atomic_enable() power on no device in OVL adaptor,
> + * we have to implement a function to do the job instead.
> + *
> + * returns:
> + * zero on success, errno on failures.

You're almost there! There's just one mistake making this invalid kerneldoc;
change to...

  * Return: Zero for success or negative number for failure.

https://docs.kernel.org/doc-guide/kernel-doc.html

> + */
> +int mtk_ovl_adaptor_power_on(struct device *dev)
> +{
> +	int i, ret;
> +	struct mtk_disp_ovl_adaptor *ovl_adaptor = dev_get_drvdata(dev);
> +
> +	for (i = 0; i < OVL_ADAPTOR_ID_MAX; i++) {
> +		if (!ovl_adaptor->ovl_adaptor_comp[i] ||
> +		    !comp_matches[i].funcs->power_on)
> +			continue;
> +
> +		/*
> +		 * do not power on the devices that don't define
> +		 * .power_off() function
> +		 */
> +		if (!comp_matches[i].funcs->power_off) {
> +			dev_warn(dev, ".power_off() is undefined\n");
> +			continue;
> +		}
> +
> +		ret = comp_matches[i].funcs->power_on(ovl_adaptor->ovl_adaptor_comp[i]);
> +		if (ret < 0) {
> +			mtk_ovl_adaptor_power_off(dev);
> +			return ret;
> +		}
> +	}
> +	return 0;
> +}
> +
> +/**
> + * mtk_ovl_adaptor_power_off - Power off devices in OVL adaptor
> + * @dev: device to be powered off
> + *
> + * call .power_off() function if defined

  * Calls the .power_off() ovl_adaptor component callback if it is present.

> + */

Regards,
Angelo