[PATCH 7/9] arm64: dts: mediatek: Introduce MT8186 Steelix
Eugen Hristev
eugen.hristev at collabora.com
Mon Oct 16 01:36:16 PDT 2023
On 10/13/23 02:02, Chen-Yu Tsai wrote:
> The MT8186 Steelix, also known as the Lenovo 300e Yoga Chromebook Gen 4,
> is a convertible device based on a common design of the same name. The
> device comes in different variants. Of them, whether a world facing
> camera is integrated is the only differentiating factor between the
> two device trees added. The different SKU IDs describe this alone.
>
> The other device difference is the touchpad component used. This is
> simply handled by having both possible components described in the
> device tree, and letting the implementation figure out which one is
> actually available. The system bootloader / firmware does not
> differentiate this in that they share the same SKU IDs.
>
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 2 +
> .../mt8186-corsola-steelix-sku131072.dts | 18 ++
> .../mt8186-corsola-steelix-sku131073.dts | 18 ++
> .../dts/mediatek/mt8186-corsola-steelix.dtsi | 197 ++++++++++++++++++
> 4 files changed, 235 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 442af61b1305..7bd9471b89f9 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -43,6 +43,8 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-kodama-sku32.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131072.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-steelix-sku131073.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327681.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacool-sku327683.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-corsola-tentacruel-sku262144.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
> new file mode 100644
> index 000000000000..eae17bca8585
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131072.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2022 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola-steelix.dtsi"
> +
> +/ {
> + model = "Google Steelix board";
> + compatible = "google,steelix-sku131072", "google,steelix",
> + "mediatek,mt8186";
> + chassis-type = "convertible";
> +};
> +
> +&mt6366codec {
> + mediatek,dmic-mode = <0>; /* two-wire */
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
> new file mode 100644
> index 000000000000..a55375b95d0d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix-sku131073.dts
> @@ -0,0 +1,18 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2022 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola-steelix.dtsi"
> +
> +/ {
> + model = "Google Steelix board";
> + compatible = "google,steelix-sku131073", "google,steelix",
> + "mediatek,mt8186";
> + chassis-type = "convertible";
> +};
> +
> +&mt6366codec {
> + mediatek,dmic-mode = <1>; /* one-wire */
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
> new file mode 100644
> index 000000000000..8488f2f9dc4d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-steelix.dtsi
> @@ -0,0 +1,197 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright 2023 Google LLC
> + */
> +
> +/dts-v1/;
> +#include "mt8186-corsola.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/{
> + pp1000_edpbrdg: regulator-pp1000-edpbrdg {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1000_edpbrdg";
> + pinctrl-names = "default";
> + pinctrl-0 = <&en_pp1000_edpbrdg>;
> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 29 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&pp3300_z2>;
> + };
> +
> + pp1800_edpbrdg_dx: regulator-pp1800-edpbrdg-dx {
> + compatible = "regulator-fixed";
> + regulator-name = "pp1800_edpbrdg_dx";
> + pinctrl-names = "default";
> + pinctrl-0 = <&en_pp1800_edpbrdg>;
> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 30 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&mt6366_vio18_reg>;
> + };
> +
> + pp3300_edp_dx: regulator-pp3300-edp-dx {
> + compatible = "regulator-fixed";
> + regulator-name = "pp3300_edp_dx";
> + pinctrl-names = "default";
> + pinctrl-0 = <&en_pp3300_edpbrdg>;
> + enable-active-high;
> + regulator-boot-on;
> + gpio = <&pio 31 GPIO_ACTIVE_HIGH>;
> + vin-supply = <&pp3300_z2>;
> + };
> +};
> +
> +&dsi_out {
> + remote-endpoint = <&anx7625_in>;
> +};
> +
> +&i2c0 {
> + clock-frequency = <400000>;
> +
> + anx_bridge: anx7625 at 58 {
> + compatible = "analogix,anx7625";
> + reg = <0x58>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&anx7625_pins>;
> + enable-gpios = <&pio 96 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
> + vdd10-supply = <&pp1000_edpbrdg>;
> + vdd18-supply = <&pp1800_edpbrdg_dx>;
> + vdd33-supply = <&pp3300_edp_dx>;
> + analogix,lane0-swing = /bits/ 8 <0x70 0x30>;
> + analogix,lane1-swing = /bits/ 8 <0x70 0x30>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> +
> + anx7625_in: endpoint {
> + remote-endpoint = <&dsi_out>;
> + data-lanes = <0 1 2 3>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> +
> + anx7625_out: endpoint {
> + remote-endpoint = <&panel_in>;
> + };
> + };
> + };
> +
> + aux-bus {
> + panel: panel {
> + compatible = "edp-panel";
> + power-supply = <&pp3300_disp_x>;
> + backlight = <&backlight_lcd0>;
> +
> + port {
> + panel_in: endpoint {
> + remote-endpoint = <&anx7625_out>;
> + };
> + };
> + };
> + };
> + };
> +};
> +
> +&i2c1 {
> + touchscreen: touchscreen at 5d {
> + compatible = "goodix,gt7375p";
> + reg = <0x5d>;
> + interrupts-extended = <&pio 12 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&touchscreen_pins>;
> + reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
> + vdd-supply = <&pp3300_s3>;
> + goodix,no-reset-during-suspend;
> + };
> +};
> +
> +&i2c2 {
> + i2c-scl-internal-delay-ns = <22000>;
> +
> + /* second source component */
> + touchpad at 2c {
> + compatible = "hid-over-i2c";
> + reg = <0x2c>;
> + hid-descr-addr = <0x20>;
> + interrupts-extended = <&pio 11 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&trackpad_pin>;
> + vdd-supply = <&pp3300_s3>;
> + wakeup-source;
> + };
Hi Chen-Yu,
This is not okay, the `trackpad_pin` is shared with touchpad at 15 , and if
drivers are probed in parallel , this can lead to a conflict on this pin
(GPIO11)
Eugen
> +};
> +
> +&keyboard_controller {
> + function-row-physmap = <
> + MATRIX_KEY(0x00, 0x02, 0) /* T1 */
> + MATRIX_KEY(0x03, 0x02, 0) /* T2 */
> + MATRIX_KEY(0x02, 0x02, 0) /* T3 */
> + MATRIX_KEY(0x01, 0x02, 0) /* T4 */
> + MATRIX_KEY(0x03, 0x04, 0) /* T5 */
> + MATRIX_KEY(0x02, 0x04, 0) /* T6 */
> + MATRIX_KEY(0x01, 0x04, 0) /* T7 */
> + MATRIX_KEY(0x02, 0x09, 0) /* T8 */
> + MATRIX_KEY(0x01, 0x09, 0) /* T9 */
> + MATRIX_KEY(0x00, 0x04, 0) /* T10 */
> + >;
> +
> + linux,keymap = <
> + MATRIX_KEY(0x00, 0x02, KEY_BACK)
> + MATRIX_KEY(0x03, 0x02, KEY_REFRESH)
> + MATRIX_KEY(0x02, 0x02, KEY_ZOOM)
> + MATRIX_KEY(0x01, 0x02, KEY_SCALE)
> + MATRIX_KEY(0x03, 0x04, KEY_BRIGHTNESSDOWN)
> + MATRIX_KEY(0x02, 0x04, KEY_BRIGHTNESSUP)
> + MATRIX_KEY(0x01, 0x04, KEY_MICMUTE)
> + MATRIX_KEY(0x02, 0x09, KEY_MUTE)
> + MATRIX_KEY(0x01, 0x09, KEY_VOLUMEDOWN)
> + MATRIX_KEY(0x00, 0x04, KEY_VOLUMEUP)
> + CROS_STD_MAIN_KEYMAP
> + >;
> +};
> +
> +&pio {
> + anx7625_pins: anx7625-pins {
> + pins1 {
> + pinmux = <PINMUX_GPIO96__FUNC_GPIO96>,
> + <PINMUX_GPIO98__FUNC_GPIO98>;
> + output-low;
> + };
> +
> + pins2 {
> + pinmux = <PINMUX_GPIO9__FUNC_GPIO9>;
> + input-enable;
> + bias-disable;
> + };
> + };
> +
> + en_pp1000_edpbrdg: pp1000-edpbrdg-en-pins {
> + pins {
> + pinmux = <PINMUX_GPIO29__FUNC_GPIO29>;
> + output-low;
> + };
> + };
> +
> + en_pp1800_edpbrdg: pp1800-edpbrdg-en-pins {
> + pins {
> + pinmux = <PINMUX_GPIO30__FUNC_GPIO30>;
> + output-low;
> + };
> + };
> +
> + en_pp3300_edpbrdg: pp3300-edpbrdg-en-pins {
> + pins {
> + pinmux = <PINMUX_GPIO31__FUNC_GPIO31>;
> + output-low;
> + };
> + };
> +};
More information about the Linux-mediatek
mailing list