[PATCH 2/7] media: mediatek: vcodec: Setting the supported h264 level for each platform
Yunfei Dong
yunfei.dong at mediatek.com
Sun Oct 15 23:43:41 PDT 2023
The supported resolution and fps of different platforms are not the
same. Need to set the supported level according to the chip name.
Signed-off-by: Yunfei Dong <yunfei.dong at mediatek.com>
---
.../vcodec/decoder/mtk_vcodec_dec_stateless.c | 45 +++++++++++++++++++
1 file changed, 45 insertions(+)
diff --git a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
index e29c9c58f3da..f4af81bddc58 100644
--- a/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
+++ b/drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateless.c
@@ -56,6 +56,15 @@ static const struct mtk_stateless_control mtk_stateless_controls[] = {
},
.codec_type = V4L2_PIX_FMT_H264_SLICE,
},
+ {
+ .cfg = {
+ .id = V4L2_CID_MPEG_VIDEO_H264_LEVEL,
+ .min = V4L2_MPEG_VIDEO_H264_LEVEL_1_0,
+ .def = V4L2_MPEG_VIDEO_H264_LEVEL_4_1,
+ .max = V4L2_MPEG_VIDEO_H264_LEVEL_4_2,
+ },
+ .codec_type = V4L2_PIX_FMT_H264_SLICE,
+ },
{
.cfg = {
.id = V4L2_CID_STATELESS_H264_DECODE_MODE,
@@ -519,6 +528,40 @@ static const struct v4l2_ctrl_ops mtk_vcodec_dec_ctrl_ops = {
.s_ctrl = mtk_vdec_s_ctrl,
};
+static void mtk_vcodec_dec_fill_h264_level(struct v4l2_ctrl_config *cfg,
+ struct mtk_vcodec_dec_ctx *ctx)
+{
+ switch (ctx->dev->chip_name) {
+ case MTK_VDEC_MT8192:
+ cfg->max = V4L2_MPEG_VIDEO_H264_LEVEL_5_1;
+ break;
+ case MTK_VDEC_MT8188:
+ case MTK_VDEC_MT8195:
+ cfg->max = V4L2_MPEG_VIDEO_H264_LEVEL_5_2;
+ break;
+ case MTK_VDEC_MT8183:
+ case MTK_VDEC_MT8186:
+ cfg->max = V4L2_MPEG_VIDEO_H264_LEVEL_4_2;
+ break;
+ default:
+ cfg->max = V4L2_MPEG_VIDEO_H264_LEVEL_4_1;
+ break;
+ };
+}
+
+static void mtk_vcodec_dec_reset_controls(struct v4l2_ctrl_config *cfg,
+ struct mtk_vcodec_dec_ctx *ctx)
+{
+ switch (cfg->id) {
+ case V4L2_CID_MPEG_VIDEO_H264_LEVEL:
+ mtk_vcodec_dec_fill_h264_level(cfg, ctx);
+ mtk_v4l2_vdec_dbg(3, ctx, "h264 supported level: %lld %lld", cfg->max, cfg->def);
+ break;
+ default:
+ break;
+ };
+}
+
static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_dec_ctx *ctx)
{
unsigned int i;
@@ -532,6 +575,8 @@ static int mtk_vcodec_dec_ctrls_setup(struct mtk_vcodec_dec_ctx *ctx)
for (i = 0; i < NUM_CTRLS; i++) {
struct v4l2_ctrl_config cfg = mtk_stateless_controls[i].cfg;
cfg.ops = &mtk_vcodec_dec_ctrl_ops;
+
+ mtk_vcodec_dec_reset_controls(&cfg, ctx);
v4l2_ctrl_new_custom(&ctx->ctrl_hdl, &cfg, NULL);
if (ctx->ctrl_hdl.error) {
mtk_v4l2_vdec_err(ctx, "Adding control %d failed %d", i,
--
2.18.0
More information about the Linux-mediatek
mailing list