[PATCH 2/2] clk: mediatek: mt8195-topckgen: Refactor parents for top_dp/edp muxes

[AngeloGioacchino Del Regno]

Il 18/07/23 11:03, Maxime Ripard ha scritto:
> On Mon, Jul 17, 2023 at 04:30:48PM +0200, AngeloGioacchino Del Regno wrote:
>>>>>> AFAIK the recommended way to deal with this is to use
>>>>>> clk_set_rate_exclusive() and co. in whatever consumer driver that
>>>>>> needs exclusive control on the clock rate.
>>>>>
>>>>> I guess it works, but it looks to me like the issue here is that the
>>>>> provider should disable it entirely? My expectation for
>>>>> clk_set_rate_exclusive() is that one user needs to lock the clock rate
>>>>> to operate properly.
>>>>>
>>>>> If the provider expectation is that the rate or parent should never
>>>>> changed, then that needs to be dealt with at the provider level, ie
>>>>> through the clk_ops.
>>>>>
>>>>>> However I'm not sure if that works for parents. It should, given the
>>>>>> original use case was for the sunxi platforms, which like the MediaTek
>>>>>> platform here has 2 PLLs for video related consumers, but I couldn't
>>>>>> find code verifying it.
>>>>>
>>>>> If you want to prevent clocks from ever being reparented, you can use
>>>>> the new clk_hw_determine_rate_no_reparent() determine_rate
>>>>> implementation.
>>>>>
>>>>
>>>> We want the clocks to be reparented, as we need them to switch parents as
>>>> explained before... that's more or less how the tree looks:
>>>>
>>>> TVDPLL(x) -> PLL Divider (fixed) -> MUX -> Gate -> Controller
>>>>
>>>> Besides, I think that forcing *one* parent to the dp/edp mux would produce a
>>>> loss of the flexibility that the clock framework provides.
>>>>
>>>> I again want to emphasize on the fact that TVDPLL1 and TVDPLL2 are *identical*
>>>> in specs, and on that there will never be a MT8195 SoC that has only one of
>>>> the two PLLs, for obvious reasons...
>>>>
>>>> P.S.: If you need more context, I'll be glad to answer to any other question!
>>>
>>> Then I have no idea what the question is :)
>>>
>>> What are you trying to achieve / fix, and how can I help you ? :)
>>
>> Chen-Yu, Alexandre had/have questions about if there was any other solution instead
>> of using the solution of *this* commit, so, if there's any other better solution
>> than the one that I've sent as this commit.
>>
>> I'm the one saying that this commit is the best solution :-P
> 
> I went back to the original patch, and my understanding is that, when
> running two output in parallel, the modeset of one can affect the second
> one, and that's bad, right?
> 
> If so, then you usually have multiple ways to fix this:
> 
>   - This patch
>   - Using clk_set_rate_exclusive like Chen-Yu suggested
>   - Using a notifier to react to a rate change and adjust
> 
> I'm not aware of any "official" guidelines at the clock framework level
> regarding which to pick and all are fine.
> 
> My opinion though would be to use clk_set_rate_exclusive(), for multiple
> reasons.
> 
> The first one is that it models correctly what you consumer expects:
> that the rate is left untouched. This can happen in virtually any
> situation where you have one clock in the same subtree changing rate,
> while the patch above will only fix that particular interference.
> 
> The second one is that, especially with DP, you only have a handful of
> rates you'll need to reach. 148MHz, 297MHz, 594MHz, and possibly a bunch
> of others for eDP panels. It's thus likely to have both controllers
> having the same frequency requirement, and thus it makes it possible to
> run from only one PLL and shut the other down.
> 
> This patch will introduce orphan clocks issues that are always a bit
> bothersome. A notifier would be troublesome to use and will probably
> introduce glitches plus some weird interaction with scrambling if you
> ever support it.
> 
> So, yeah, using clk_set_rate_exclusive() seems like the best option to me :)
> 
> Maxime

Sorry for resurrecting a very old thread, I was able to come back to this issue
right now: there's an issue that I can't really think about how to solve with
just the usage of clk_set_rate_exclusive().

Remembering that the clock tree is as following:
TVDPLL(x) -> PLL Divider (fixed) ->
-> MUX (can choose any of TVDPLL(1/2)_d(2/4/6/8/16)) -> Gate -> Controller

The DPI driver is doing:
1. Check the best factor for setting rate of a TVDPLL
2. Set rate of one TVDPLL (specified in DT): clk_set_rate(dpi->tvd_clk, rate);
    2a. Read the rate of that PLL again to know the precise clock output
3. Set rate on the Gate clock (forwards to MUX, selecting TVDPLL(x)_d(y)):
    clk_set_rate(dpi->pixel_clk, rate);


Now, the issue is: if I change the final pixel_clk rate setting to _exclusive(),
nothing still guarantees that we will be selecting the TVDPLL that we have
manipulated in step 2, look at the following example.

tvd_clk == TVDPLL1
pixel_clk == TOP_DP (can be muxed to any tvdpll1/2 dividers!)

clk_set_rate(tvdpll1, something); new_rate = clk_get_rate(tvdpll1)

...calculations... new_rate = pixclk * factor;
...more calculations....

clk_set_rate(pixel_clk, calculated_something)
        ^^^^^^

There is still no guarantee that pixel_clk is getting parented to one of the
TVDPLL1 dividers, as it could still get parented to a TVDPLL2 divider instead
if the other controller has set TVDPLL2 to "an acceptable rate": it's true that
this would work - yes but suboptimally! - because we want to set a specific
factor to reduce jitter on the final pixel clock.


....And I came back to this commit being again the best solution for me because....

1. You also seem to agree with me that a notifier would be troublesome and would
    probably introduce glitches; and
2. clk_set_rate_exclusive() doesn't give me any guarantee about selecting the same
    PLL that the driver was manipulating before.


Am I underestimating and/or ignoring anything else in all of that?

Cheers,
Angelo