[PATCH v4 03/12] regulator: dt-bindings: mt6358: Add regulator-allowed-modes property

[Rob Herring]

On Thu, 28 Sep 2023 16:55:26 +0800, Chen-Yu Tsai wrote:
> The MT6358 PMIC allows changing operating modes for the buck regulators,
> but not the LDOs. Existing device trees and the Linux implementation
> already utilize this through the standard regulator-allowed-modes
> property.
> 
> The values currently used in existing device trees are simply raw
> numbers. The values in the Linux driver are matching numbers defined
> with macros denoting the two supported modes. Turns out these two
> modes are common across parts of the larger MT63xx PMIC family. The
> MT6397 regulator binding already has macros for the two modes, with
> matching numbers.
> 
> Codify the supported values for regulator-allowed-modes for the MT6358
> in the device tree binding: 0 and 1 are supported for buck regulators,
> and the property should not be present for LDO regulators. Users should
> use the dt-bindings/regulator/mediatek,mt6397-regulator.h header for
> the macros, instead of using raw numbers.
> 
> Signed-off-by: Chen-Yu Tsai <wenst at chromium.org>
> ---
> Changes since v3:
> - adapt to ldo_vxo22 and ldo_vusb movement to properties
> 
> Changes since v2:
> - new patch
> 
>  .../regulator/mediatek,mt6358-regulator.yaml  | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 

Reviewed-by: Rob Herring <robh at kernel.org>