[PATCH v2] mmc: mtk-sd: Increase the verbosity of msdc_track_cmd_data

[Wenbin Mei (梅文彬)]

On Wed, 2023-11-29 at 10:59 +0800, Pin-yen Lin wrote:
>  	 
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
>  This log message is necessary for debugging, so enable it by default
> to
> debug issues that are hard to reproduce locally.
> 
> Signed-off-by: Pin-yen Lin <treapking at chromium.org>
> 
> ---
> 
> Changes in v2:
> - Use dev_warn() instead of dev_err()
> 
>  drivers/mmc/host/mtk-sd.c | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 97f7c3d4be6e..907c13d746c1 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1150,8 +1150,8 @@ static void msdc_recheck_sdio_irq(struct
> msdc_host *host)
>  static void msdc_track_cmd_data(struct msdc_host *host, struct
> mmc_command *cmd)
>  {
>  	if (host->error)
> -		dev_dbg(host->dev, "%s: cmd=%d arg=%08X; host-
> >error=0x%08X\n",
> -			__func__, cmd->opcode, cmd->arg, host->error);
> +		dev_warn(host->dev, "%s: cmd=%d arg=%08X; host-
> >error=0x%08X\n",
> +			 __func__, cmd->opcode, cmd->arg, host->error);


Hi Pin-yen,

Thanks for your changes!
Indeed, these logs are necessary for us to debug, but the crc errors
during the tuning process
are expected and we don't want them to be printed.
The timeout errors during the tuning process are unexpected and should
be printed.

So we can change it as below:
if (host->error) {
        if ((!mmc_op_tuning(cmd->opcode) && !host->hs400_tuning) ||
            cmd->error == -ETIMEDOUT) {
                dev_warn(host->dev, "%s: cmd=%d arg=%08X; host-
>error=0x%08X\n", __func__, cmd->opcode, cmd->arg, host->error);
        }
}

Best regards,
Wenbin

>  }
>  
>  static void msdc_request_done(struct msdc_host *host, struct
> mmc_request *mrq)
> -- 
> 2.43.0.rc1.413.gea7ed67945-goog
>