[PATCH v3 17/22] pinctrl: ingenic: Convert to use grp member

[Andy Shevchenko]

Convert drivers to use grp member embedded in struct group_desc.

Acked-by: Paul Cercueil <paul at crapouillou.net>
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
---
 drivers/pinctrl/pinctrl-ingenic.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/pinctrl/pinctrl-ingenic.c b/drivers/pinctrl/pinctrl-ingenic.c
index 393873de910a..6806fede5df4 100644
--- a/drivers/pinctrl/pinctrl-ingenic.c
+++ b/drivers/pinctrl/pinctrl-ingenic.c
@@ -3756,17 +3756,17 @@ static int ingenic_pinmux_set_mux(struct pinctrl_dev *pctldev,
 		return -EINVAL;
 
 	dev_dbg(pctldev->dev, "enable function %s group %s\n",
-		func->name, grp->name);
+		func->name, grp->grp.name);
 
 	mode = (uintptr_t)grp->data;
 	if (mode <= 3) {
-		for (i = 0; i < grp->num_pins; i++)
-			ingenic_pinmux_set_pin_fn(jzpc, grp->pins[i], mode);
+		for (i = 0; i < grp->grp.npins; i++)
+			ingenic_pinmux_set_pin_fn(jzpc, grp->grp.pins[i], mode);
 	} else {
 		pin_modes = grp->data;
 
-		for (i = 0; i < grp->num_pins; i++)
-			ingenic_pinmux_set_pin_fn(jzpc, grp->pins[i], pin_modes[i]);
+		for (i = 0; i < grp->grp.npins; i++)
+			ingenic_pinmux_set_pin_fn(jzpc, grp->grp.pins[i], pin_modes[i]);
 	}
 
 	return 0;
@@ -4293,12 +4293,12 @@ static int __init ingenic_pinctrl_probe(struct platform_device *pdev)
 
 	for (i = 0; i < chip_info->num_groups; i++) {
 		const struct group_desc *group = &chip_info->groups[i];
+		const struct pingroup *grp = &group->grp;
 
-		err = pinctrl_generic_add_group(jzpc->pctl, group->name,
-				group->pins, group->num_pins, group->data);
+		err = pinctrl_generic_add_group(jzpc->pctl, grp->name, grp->pins, grp->npins,
+						group->data);
 		if (err < 0) {
-			dev_err(dev, "Failed to register group %s\n",
-					group->name);
+			dev_err(dev, "Failed to register group %s\n", grp->name);
 			return err;
 		}
 	}
-- 
2.43.0.rc1.1.gbec44491f096